排序方式： 共有17条查询结果，搜索用时 18 毫秒
1.
Momentum and heat flux were measured with a sonic anemometer at the Marine Observation Tower in the port of ItÔ. Under unstable conditions (T
w
-T
a
=3C4C), using the eddy correlation method, results show thatCd=(1.2±0.3)×10–3 andCh=(1.5±0.3)×10–3 at 5.5 m above mean sea level except for the case of weak winds.An unexpected relationship betweenCd and (–z/L) was observed, that is,Cd decreases as (–z/L) increases. If roughness variation over the sea is taken into account, we can explain the decrease in the range of (–z/L) less than 1, but not in the range greater than 1. This is due to a strong instability effect and the change of roughness class, from moderately rough to smooth. 相似文献
2.
Long time behavior of one-dimensional self-gravitating system is numerically investigated. Itinerant behavior among quasiequilibria
is discovered, and its origin is clarified. The macroscopic distributions of the quasiquilibria are different from the isothermal
distribution, but the transient states, which appears between two successive quasiequilibria, resemble the isothermal distribution.
Averaging over the is itinerancy gives approximately the thermal equilibrium.
This revised version was published online in July 2006 with corrections to the Cover Date. 相似文献
3.
Experimental study on the bidirectional inelastic deformation capacity of U‐shaped steel dampers for seismic isolated buildings 
下载免费PDF全文
下载免费PDF全文 Diana Ene Shoichi Kishiki Satoshi Yamada Yu Jiao Yoshinao Konishi Masao Terashima Norihisa Kawamura 《地震工程与结构动力学》2016,45(2):173-192
Hysteretic dampers are used to dissipate earthquake‐induced energy in base‐isolated structures by acquiring inelastic deformations, rendering their hysteretic behavior of vital importance. The present paper focuses on investigating the behavior of U‐shaped steel dampers under bidirectional loading; this is significantly different from their corresponding uniaxial behavior. Two main sets of loading tests on full‐scale specimens are conducted in this regard: (i) quasi‐static tests with simple histories and (ii) dynamic tests with realistic loading histories. Based on the results obtained in the quasi‐static tests, an interaction curve that accounts for the reduction of the cyclic deformation capacity is proposed. However, the fidelity of this relation must be assessed under loading conditions similar to those of a seismically isolated structure subjected to an earthquake, which represents the goal of the second set of tests. The results of the dynamic tests validate the proposed interaction curve for estimating the deformation capacity of U‐shaped steel dampers under bidirectional loading. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
4.
Aerial electromagnetic exploration obtains the ground resistivity of a wide area by measuring the intensity of a secondary magnetic field induced in the ground by a primary magnetic field. We conducted the AEM exploration in the Yamakoshi Village where was dameged by the Mid Niigata Prefecture Earthquake in 2004, for the landslide hazard assessment. The apparent resistivity distribution in the survey area differ between the Imogawa River Basin and the Asahigawa River Basin, and the former shows high resistivity and the later shows low resistivity with 30 -m as the boundary. In the high resistivity zone that corresponds to the sandy rock distribution area, the large landslide blocks show lower resisitivity than in the surrounding ground. In sandy rock distribution areas, it is possible for the relatively low resistivity parts to be an index of the instability of slopes, even in landslide blocks where deformation has not yet appeared. 相似文献
5.
Kenji Konishi 《Tectonophysics》1989,160(1-4):249-265
The Daiichi-Kashima Seamount subducting in the Japan Trench has two reef-capped flat tops with different depths, which are bounded by a nearly straight scarp. The western (inboard) crest is 5300–5450 m deep, and the eastern (outboard) one is 3880–4000 m deep.
A variety of shallow-water reefoid limestones studied by the Kaiko “Nautile” dives not only confirms the similarity in thickness and lithologies, but also establishes an approximate biostratigraphic correlation between the two reefoid caps, based for the first time on the orbitolinid foraminifers (Orbitolina (Mesorbitolina) parva from the western block and O. (M.) texana from the eastern block).
This conclusion supports the interpretation that the present topography of the seamount has resulted from a subduction-induced faulting of a once single reef-capped guyot. A plausible scenario of the fate of a subducting Early Cretaceous guyot in the Western Pacific is outlined as exemplified by the Daiichi-Kashima Seamount. 相似文献
6.
7.
Qi Fu Peng Lu Hiromi Konishi Robert Dilmore Huifang Xu W.E. Seyfried Chen Zhu 《Chemical Geology》2009,258(3-4):125-135
Batch reactor experiments were conducted to assess perthitic alkali-feldspar dissolution and secondary mineral formation in an initially acidic fluid (pH = 3.1) at 200 °C and 300 bars. Temporal evolution of fluid chemistry was monitored by major element analysis of in situ fluid samples. Solid reaction products were retrieved from two identical experiments terminated after 5 and 78 days. Scanning electron microscopy revealed dissolution features and significant secondary mineral coverage on feldspar surfaces. Boehmite and kaolinite were identified as secondary minerals by X-ray diffraction and transmission electron microscopy. X-ray photoelectron spectroscopy analysis of alkali-feldspar surfaces before and after reaction showed a trend of increasing Al/Si ratios and decreasing K/Al ratios with reaction progress, consistent with the formation of boehmite and kaolinite.Saturation indices of feldspars and secondary minerals suggest that albite dissolution occurred throughout the experiments, while K-feldspar exceeded saturation after 216 h of reaction. Reactions proceeded slowly and full equilibrium was not achieved, the relatively high temperature of the experiments notwithstanding. Thus, time series observations indicate continuous supersaturation with respect to boehmite and kaolinite, although the extent of this decreased with reaction progress as the driving force for albite dissolution decreased. The first experimental evidence of metastable co-existence of boehmite, kaolinite and alkali feldspar in the feldspar hydrolysis system is consistent with theoretical models of mineral dissolution/precipitation kinetics where the ratio of the secondary mineral precipitation rate constant to the rate constant of feldspar dissolution is well below unity. This has important implications for modeling the time-dependent evolution of feldspar dissolution and secondary mineral formation in natural systems. 相似文献
8.
Lead coprecipitation with iron oxyhydroxide nano-particles 总被引：1，自引：0，他引：1
Peng Lu Noel T. Nuhfer Qin Li Hiromi Konishi Erika Elswick Chen Zhu 《Geochimica et cosmochimica acta》2011,75(16):4547-4561
Pb2+ and Fe3+ coprecipitation was studied with sorption edge measurements, desorption experiments, sorbent aging, High Resolution Transmission and Analytical Electron Microscopy (HR TEM-AEM), and geochemical modeling. Companion adsorption experiments were also conducted for comparison. The macroscopic chemical and near atomic scale HRTEM data supplemented our molecule scale analysis with EXAFS (Kelly et al., 2008). Coprecipitation of Pb2+ with ferric oxyhydroxides occurred at ∼pH 4 and is more efficient than adsorption in removing Pb2+ from aqueous solutions at similar sorbate/sorbent ratios and pH. X-ray Diffraction (XRD) shows peaks of lepidocrocite and two additional broad peaks similar to fine particles of 2-line ferrihydrite (2LFh). HRTEM of the Pb-Fe coprecipitates shows a mixture of 2-6 nm diameter spheres and 8-20 by 200-300 nm needles, both uniformly distributed with Pb2+. Geochemical modeling shows that surface complexation models fit the experimental data of low Pb:Fe ratios when a high site density is used. Desorption experiments show that more Pb2+ was released from loaded sorbents collected from adsorption experiments than from Pb to Fe coprecipitates at dilute EDTA concentrations. Desorbed Pb2+ versus dissolved Fe3+ data show a linear relationship for coprecipitation (CPT) desorption experiments but a parabolic relationship for adsorption (ADS) experiments.Based on these results, we hypothesize that Pb2+ was first adsorbed onto the nanometer-sized, metastable, iron oxyhydroxide polymers of 2LFh with domain size of 2-3 nm. As these nano-particles assembled into larger particles, some Pb2+ was trapped in the iron oxyhydroxide structure and re-arranged to form solid solutions. Therefore, the CPT contact method produced more efficient removal of Pb2+ than the adsorption contact method, and Pb2+ bound in CPT solids represent a more stable sequestration of Pb2+ in the environment than Pb2+ adsorbed on iron oxyhydroxide surfaces. 相似文献
9.
Masakichi Nishimura Shigeki Konishi Katsuhiko Matsunaga Kohtaro Hata Tsuneo Kosuga 《Journal of Oceanography》1983,39(6):295-300
Seventy percent of 342 seawater samples collected in the Bering Sea, North and South Pacific, Japan Sea, East and South China Seas, and Indian Ocean had concentrations of “total” mercury ranging from 3 to 6 ng Hg l?1 with an arithmetic mean of 5.3 ng l?1 and a geometric mean of 5.0 ng l?1. In some cases, a higher concentration was observed at the surface, at the halocline or thermocline, or in the bottom water. But in general, there was no consistent correlation between mercury concentration and depth, except for a statistical tendency for mercury concentration to be slightly higher in the surface water. This tendency suggests that mercury in the ocean is supplied from the atmosphere by rain washout. The latitudinal variation of surface mercury concentrations showed that the maximum concentration at each latitude decreased from 40°N to 30°S. This variation provides evidence that atmospheric mercury is emitted mainly from continental areas naturally or anthropogenically. 相似文献
10.
Talc specimens heated to 700–1450° C were examined with an analytical high-resolution transmission electron microscope. Neither the amphibole-like structure nor the MPP structure (M = mica, P = pyroxene-layer), proposed by Avgustinik and Vigdergauz (1948) and Sueno et al. (1980), was found. On the contrary, a disordered pyribole structure was observed. This pyribole showed a structure disordered in terms of chain widths, with single and double chains predominant. A local MPP structure with 4–6 repeated units of (21) sequence was generally observed in a disordered region. The electron diffraction data were consistent with maximum symmetry A2/m for the proto-MPP structure. A HRTEM study of the fine structures associated with the depolymerization of talc was the basis of a structural model proposed for the depolymerization of biopyriboles. In this model, a pair of (010) faults with a displacement of 1/2 (a+c) took an important role. The acceptor and donor regions model was also discussed. 相似文献