Distribution of authigenic albites in a limestone succession of the Helvetic Domain, eastern Switzerland     

Pauline Rais  Beat Louis-Schmid  Stefano M. Bernasconi  Eric Reusser  Helmut Weissert 《Swiss Journal of Geoscience》2008,101(1):99-106

  相似文献   

High resolution simulations of January and July climate over the western Alpine region with a nested Regional Modeling system   总被引：1，自引：0，他引：1  

M. R. Marinucci  F. Giorgi  M. Beniston  M. Wild  P. Tschuck  A. Ohmura  A. Bernasconi 《Theoretical and Applied Climatology》1995,51(3):119-138

Summary High resolution January and July present day climatologies over the central-western Alpine region are simulated with a Regional Climate Model (RegCM) nested within a General Circulation Model (GCM). The RegCM was developed at the National Center for Atmospheric Research (NCAR) and is run at 20 km grid point spacing. The model is driven by output from a present day climate simulation performed with the GCM ECHAM3 of the Max Planck Institute for Meteorology (MPI) at T106 resolution (~ 120 km). Five January and July simulations are conducted with the nested RegCM and the results for surface air temperature and precipitation are compared with a gridded observed dataset and a dataset from 99 observing stations throughout the Swiss territory. The driving ECHAM3 simulation reproduces well the position of the northeastern Atlantic jet, but underestimates the jet intensity over the Mediterranean. Precipitation over the Alpine region in the ECHAM3 simulation is close to observed in January but lower than observed in July. Compared to the driving GCM, the nested RegCM produces more precipitation in both seasons, mostly as a result of the stronger model orographic forcing. Average RegCM temperature over the Swiss region is 2–3 degrees higher than observed, while average precipitation is within 30% of observed values. The spatial distribution of precipitation is in general agreement with available gridded observations and the model reproduces the observed elevation dependency of precipitation in the summer. In the winter the simulated elevation of maximum precipitation amounts is lower than observed. Precipitation frequencies are overestimated, while precipitation intensities show a reasonable agreement with observations, especially in the winter. Sensitivity experiments with different cumulus parameterizations, soil moisture initialization and model topography are discussed. Overall, the model performance at the high resolution used here did not deteriorate compared to previous lower resolution experiments.The National Center for Atmospheric Research is sponsored by the National Science Foundation.With 11 Figures  相似文献   

A model for oxygen and sulfur isotope fractionation in sulfate during bacterial sulfate reduction processes     

Benjamin Brunner  Stefano M. Bernasconi  Jutta Kleikemper 《Geochimica et cosmochimica acta》2005,69(20):4773-4785

We present a model of bacterial sulfate reduction that includes equations describing the fractionation relationship between the sulfur and the oxygen isotope composition of residual sulfate (δ³⁴S_{SO4_residual}, δ¹⁸O_{SO4_residual}) and the amount of residual sulfate. The model is based exclusively on oxygen isotope exchange between cell-internal sulfur compounds and ambient water as the dominating mechanism controlling oxygen isotope fractionation processes. We show that our model explains δ³⁴S_{SO4_residual} vs. δ¹⁸O_{SO4_residual} patterns observed from natural environments and from laboratory experiments, whereas other models, favoring kinetic isotope fractionation processes as dominant process, fail to explain many (but not all) observed δ³⁴S_{SO4_residual} vs. δ¹⁸O_{SO4_residual} patterns. Moreover, we show that a “typical” δ³⁴S_{SO4_residual} vs. δ¹⁸O_{SO4_residual} slope does not exist. We postulate that measurements of δ³⁴S_{SO4_residual} and δ¹⁸O_{SO4_residual} can be used as a tool to determine cell-specific sulfate reduction rates, oxygen isotope exchange rates, and equilibrium oxygen isotope exchange factors. Data from culture experiments are used to determine the range of sulfur isotope fractionation factors in which a simplified set of equations can be used. Numerical examples demonstrate the application of the equations. We postulate that, during denitrification, the oxygen isotope effects in residual nitrate are also the result of oxygen isotope exchange with ambient water. Consequently, the equations for the relationship between δ³⁴S_{SO4_residual}, δ¹⁸O_{SO4_residual}, and the amount of residual sulfate could be modified and used to calculate the fractionation-relationship between δ¹⁵N_{NO3_residual}, δ¹⁸O_{NO3_residual}, and the amount of residual nitrate during denitrification.  相似文献   

Palynology of Triassic–Jurassic boundary sections in northern Switzerland     

Elke Schneebeli-Hermann  Nathan Looser  Peter A. Hochuli  Heinz Furrer  Achim G. Reisdorf  Andreas Wetzel  Stefano M. Bernasconi 《Swiss Journal of Geoscience》2018,111(1-2):99-115

A first palynostratigraphic scheme of Upper Triassic deposits in northern Switzerland was established based on spore-pollen associations and dinoflagellate cyst records from the upper part of the Upper Triassic Klettgau Formation and the lower part of the Lower Jurassic Staffelegg Formation. Drill cores from the Adlerberg region (Basel Tabular Jura) and from Weiach (northern part of Canton Zurich) as well as from an outcrop at the Chilchzimmersattel (Basel Folded Jura) were studied and five informal palynological associations are distinguished. These palynological associations correlate with palynological association of the Central European Epicontinental Basin and the Tethyan realm and provide a stratigraphic framework for the uppermost Triassic sediments in northern Switzerland. Throughout the uppermost Triassic to Jurassic palynological succession a remarkable prominence of Classopollis spp. is observed. Besides Classopollis spp. the three Rhaetian palynological associations A to C from the Upper Triassic Belchen Member include typical Rhaetian spore-pollen and dinoflagellate taxa (e.g., Rhaetipollis germanicus, Geopollis zwolinskae, Rhaetogonyaulax rhaetica, and Dapcodinium priscum). Association B differs from association A in a higher relative abundance of the sporomorph taxa Perinopollenites spp. and the consistent occurrence of Granuloperculatipollis rudis and Ricciisporites tuberculatus. Spore diversity is highest in the late Rhaetian palynological association C and includes Polypodiisporites polymicroforatus. A Rhaetian age for the Belchen Member is confirmed by palynological associations A–C, but there is no record of the latest Rhaetian and the earliest Jurassic. In contrast to the Rhaetian palynological associations the Early Jurassic associations W and D include Pinuspollenites spp., Trachysporites fuscus (in association W), and Ischyosporites variegatus. In the view of the end-Triassic mass extinction and contemporaneous environmental changes the described palynofloral succession represents the pre-extinction phase (associations A and B) including a distinct transgression, the extinction phase (association C) associated with a regression, and the post-extinction phase (association W).  相似文献   

Archaean gold mineralization in central eastern Brazil: a review   总被引：1，自引：0，他引：1  

A. Bernasconi 《Mineralium Deposita》1985,20(4):277-283

  相似文献   

Three-dimensional petrographical investigations on borehole rock samples: a comparison between X-ray computed- and neutron tomography     

P. Christe  M. Bernasconi  P. Vontobel  P. Turberg  A. Parriaux 《Acta Geotechnica》2007,2(4):269-279

Technical difficulties associated with excavation works in tectonized geological settings are frequent. They comprise instantaneous and/or delayed convergence, sudden collapse of gallery roof and/or walls, outpouring of fault-filling materials and water inflows. These phenomena have a negative impact on construction sites and their safety. In order to optimize project success, preliminary studies on the reliability of rock material found on site are needed. This implies in situ investigations (surface mapping, prospective drilling, waterflow survey, etc.) as well as laboratory investigations on rock samples (permeability determination, moisture and water content, mineralogy, petrography, geochemistry, mechanical deformation tests, etc.). A set of multiple parameters are then recorded which permit better insight on site conditions and probable behavior during excavation. Because rock formations are by nature heterogeneous, many uncertainties remain when extrapolating large-scale behavior of the rock mass from analyses of samples order of magnitudes smaller. Indirect large-scale field investigations (e.g. geophysical prospecting) could help to better constrain the relationships between lithologies at depth. At a much smaller scale, indirect analytical methods are becoming more widely used for material investigations. We discuss in this paper X-ray computed tomography (XRCT) and neutron tomography (NT), showing promising results for 3D petrographical investigations of the internal structure of opaque materials. Both techniques record contrasts inside a sample, which can be interpreted and quantified in terms of heterogeneity. This approach has the advantage of combining genetic parameters (physico-chemical rock composition) with geometric parameters resulting from alteration or deformation processes (texture and structure). A critical analysis of such 3D analyses together with the results of mechanical tests could improve predictions of short- and long-term behavior of a rock unit. Indirect methods have the advantage of being non-destructive. However, as it is the case with large-scale geophysical surveying, XRCT and NT are affected by several error factors inherent to the interaction of a radiation modality (X-ray or neutron beam) with the atomic structure of the investigated materials. Recorded signals are therefore in particular cases not artifact-free and need to be corrected in a subsequent stage of data processing.  相似文献   

La risoluzione dell'equazione di Laplace nel campo esterno a uno sferoide     

Carlo Bernasconi 《Pure and Applied Geophysics》1958,39(1):26-34

Riassunto L'Autore dimostra che, nel sistema di coordinate polari , , , si possono determinare un numeros di funzioni della sola variabile :Q ₁,Q ₃, ....Q _2s–1 tali che la sommatoria delleQ _2i–1/^2i–1 rappresenti il potenzialeV di un geoide di rotazione. La condizione di armonicità determina ciascunaQ (che si riduce a un polinomio nelle potenze di sen ) a meno di una costante arbitraria; si dispone pertanto dis costanti che servono per soddisfare la natura dellaV sulla superficie del geoide. Come esempio l'Autore ha determinato la gravità sul geoide sferico, confermando i risultati delSomigliana, e su uno sferoide generico dove ha ritrovato la relazione diClairaut.

---

Summary The Author proofs that, in the system of polar coordinates , , , it is possible to determine a numbers of functions only of the variable :Q ₁,Q ₃ ....Q _2s–1 in such a way as to make the summatory of theQ _2i–1/^2i–1 represent the potential function of a rotational geoid. The condition of harmonicity determines, saving an arbitrary constant, each of theQ which is reduced to a polynom developed by the sin powers; therefore one disposes of a number of constants to make use for satisfing theV on the geoid. To illustrate his theory the Author determines the gravity on the spherical geoid, thus confirmingSomigliana's formulas and on a spheroidal on which he pointed outClairaut's relations.

  相似文献   

Azimut di una geodetica ellissoidica passante per due punti molto lontani fra loro     

Dr. Carlo Bernasconi 《Pure and Applied Geophysics》1955,32(1):1-6

Riassunto L'Autore presenta un procedimento per la ricerca dell'azimut di una geodetica ellissoidica passante per due punti molto lontani fra loro. Istituisce dapprima una corrispondenza fra la geodetica ed un arco di cerchio massimo, corrispondenza definita con l'imporre uguali coordinate agli estremi dei due archi e la latitudine sferica normale uguale a quella ellissoidica. Sviluppa poi la longitudine ellissoidicaw in funzione di quella sferical, e poichè l fra gli estremi dell'arco di cerchio deve essere uguale a w, ne deduce una equazione per ricavare l'azimut.

---

Summary The Author outlines a procedure to research the azimuth of an ellipsoidal geodesic, which passes through two points far distant from another. A corrispondence is first instituted between the geodesic and a bow of maximum circle; this correspondence may be defined by imposing the same coordinates to the extreme parts of the two bows and the spherical normal latitude equal to the ellipsoidal one. The ellipsoidal longitudew is next developed as a function of the spherical onel and, as l between the extreme parts of the circle bow must equal w, an equation is hereby deduced to find out the azimuth.

  相似文献   

Un procedimento per l'aggiustamento delle grandi triangolazioni     

Dr. Carlo di Bernasconi 《Pure and Applied Geophysics》1955,30(1):1-7

Riassunto In una nota diA. Marussi è stato rilevato che se, dopo aver compensato una triangolazione con le sole condizioni intrinseche, si impongono ulteriori condizioni come la coincidenza di alcuni vertici in punti prefissati, è possible determinare con sufficiente precisione le coordinate dei rimanenti vertici attraverso corrispondenze analitiche che soddisfino le condizioni di contorno e col requisito di limitare gli errori lineari e angolari. — L'Autore della presente nota propone una nuova corrispondenza, cioè quella atta a rappresentare le deformazioni di una membrana o rete elastica sottoposta ad assumere una data configurazione; stabilisce le equazioni per la rete elastica piana e sferica; mette in evidenza come il principio fisico della minima energia e quello matematico dei minimi quadrati conducano alle medesime equazioni.

---

Summary A. Marussi has pointed out that if, after having compensated a triangulation with the intrinsic conditions only, we impose further conditions as the coincidence of some vertex in prefixed points, we can determinate the coordinates of the other vertex: that happens through analytical connections fulling contour conditions and limiting linear and angular errors.The present Author proposes a new connection, which is apt to represent the deformations of an elastic network which is to get a given configuration. He fixes the equations for the spherical and plane networks; points out how the physical principle of the least energy and the mathematical one of the least squares may give the same equations.

  相似文献   

Solar activity in the last millennium recorded in the δ18O profile of planktonic foraminifera of a shallow water Ionian Sea core     

Castagnoli  G. Cini  Bonino  G.  Della Monica  P.  Taricco  C.  Bernasconi  S.M. 《Solar physics》1999,188(1):191-202

In this paper we present the ¹⁸O profile of Globigerinoides ruber measured in the GT90/3 shallow water Ionian sea core, dated with high precision. The ¹⁸O profile covers the period 1200–1900 AD, with a resolution of 3.87 years. This long record of 700 years of ¹⁸O allows us to identify the imprint of the solar cycle in a climatic record. In fact, the spectral analysis of the time series performed with different methods shows a dominant periodicity of about 11 years with an amplitude of 0.07. The signal is in opposition to the sunspot number cycle. This component is identified at a high significance level by Monte Carlo Singular Spectrum Analysis (MC-SSA).  相似文献