Concentration of cementation solution (CCS) is one of the key factors influencing the cementation effect on soil improvement through the microbially induced carbonate precipitation (MICP) process. To precipitate more calcium carbonate per treatment, a higher CCS is needed. However, the MICP process may be retarded or even terminated with an increase in CCS. This retarding effect can be a major limitation for the MICP-based soil treatment and thus needs to be understood properly. This paper presents a systematic study on the conditions causing retarding and its effect on biocementation. The test results of this study have identified that there is retarding effect of CCS on the MICP process, showing that the calcium conversion efficiency, which represents the amount of calcium that has been converted into calcium carbonate in each treatment, reduces with the increase in CCS, and the concentration of calcium is the control factor. The retarding effect will dominate increasingly when CCS is higher than 1.0 M and the amount of calcium carbonate precipitation will reduce for the given amount and type of bacteria used in this study and become zero with CCS of 2.5 M. For the same calcium carbonate content, the unconfined compressive strength is greater for sand treated using a lower CCS as the contribution to the bonding strength by the calcium carbonate generated under a lower CCS is greater than that under a higher CCS.
相似文献Enzyme induced carbonate precipitation (EICP) is an emerging soil improvement method using free urease enzyme for urea hydrolysis. This method has advantages over the commonly used microbially induced carbonate precipitation (MICP) process as it does not involve issues related to bio-safety. However, in terms of efficiency of calcium carbonate production, EICP is considered lower than that of MICP. In this paper, a high efficiency EICP method is proposed. The key of this new method is to adopt a one-phase injection of low pH solution strategy. In this so-called one-phase-low-pH method, EICP solution consisting of a mixture of urease solution of pH?=?6.5, urea and calcium chloride is injected into soil. The test results have shown that the one-phase-low-pH method can improve significantly the calcium conversion efficiency and the uniformity of calcium carbonate distribution in the sand samples as compared with the conventional two-phase EICP method. Furthermore, the unconfined compressive strength of sand treated using the one-phase-low-pH method is much higher than that using the two-phase method and the one-phase-low-pH method is also simpler and more efficient as it involves less number of injections.
相似文献Calcareous sands have abundant intraparticle pores and are prone to particle breakage. This often leads to poor engineering properties, which poses a challenge to coastal infrastructure construction. A study using bio-cementation to improve the engineering properties of calcareous sand is presented in this paper. The macro- and microscopic properties of bio-cemented calcareous sand were characterized by drained triaxial tests and scanning electron microscopy observations. Experimental results show that the precipitated calcium carbonate can effectively fill the intra- and interparticle pores and bond adjacent particles, thus enhancing the shear strength of calcareous sand. The special structures (e.g. abundant intraparticle pores and rough surface) and mineral components (i.e. calcium carbonate) of calcareous sand are beneficial for improving bacterial retention in soil, which leads to a relatively uniform and dense calcium carbonate distribution on the sand particle surface, exhibiting a layer-by-layer growth pattern. This growth pattern and the abundant interparticle pores would result in less effective calcium carbonate. The strength enhancement of bio-cemented calcareous sand is significantly lower than that of bio-cemented silica sand at the same calcium carbonate content, which may be caused by the differences in the following: (a) soil skeleton strength; (b) the amount of effective calcium carbonate; and (c) interparticle pore-filling of calcium carbonate.
相似文献Calcareous sand, a special type of sand commonly used for the construction of coastal engineering in tropical coasts, is usually required to be strengthened due to its poor engineering mechanical properties. Microbially induced carbonate precipitation has been proved to be a promising method for this purpose. A higher cementation level generally leads to a greater strength enhancement, but tends to cause brittle failure of bio-cemented calcareous sand, which in turn brings great potential risks for the coastal engineering. Therefore, the shear behaviour, especially the brittle behaviour, of bio-cemented calcareous sand needs to be understood properly, and taking some measures to improve its brittle behaviour is also necessary. In this regard, a series of triaxial compression tests were conducted to study the shear behaviour of bio-cemented calcareous sand with various cementation levels, and the waste rubber particles are used to improve the brittle behaviour of bio-cemented calcareous sand. The test results show that the shear strength of bio-cemented calcareous sand increases with the increase in cementation level, and the brittle behaviour is significant gradually. The waste rubber particles contribute to improve the brittle behaviour of bio-cemented calcareous sand, reducing the dilation of bio-cemented calcareous sand and slowing the changes in dilatancy with the increment of stress.
相似文献