排序方式： 共有8条查询结果，搜索用时 140 毫秒
1
1.
Thomas Foulon Ali Saeidi Romain Chesnaux Miroslav Nastev Alain Rouleau 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2018,12(1):74-86
The spatial distribution of soil shear-wave velocity and the fundamental period of vibration were selected as input parameters for the determination of potential seismic site effects in the Saguenay region, Canada. The methodology used in this study involved three clear steps. First, a 3D geological model of the surficial deposits was built taking into consideration the type, spatial distribution and thickness of the deposits. Second, representative average Vs values were determined for each of the major soil units. Finally, the average shear-wave velocity from the ground surface to bedrock (Vsav), the shear-wave velocity of the upper 30 m (Vs30) and the fundamental site resonance period (T0) were calculated over a regular grid for the study area. The results include the spatial distribution of the fundamental site resonance period, the average shear-wave velocity in the first 30 m of the ground and the spatial distribution of National Building Code of Canada seismic soil classes for the Saguenay region. 相似文献
2.
Miroslav Nastev Michel Parent Nicolas Benoit Martin Ross Danielle Howlett 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2016,10(3):200-212
Shear-wave velocity of the top 30?m, VS30, is commonly used for prediction of the seismic site response. This paper presents development, validation and uncertainty assessment of a regional VS30 model based on a combination of simplified 3D geology and statistically representative velocity values. Results identify soft marine sediments in deep sedimentary basins as zones most susceptible to seismic shaking. Compared to the available urban-scale seismic zonation studies, the regional model showed a success rate of roughly 64% in predicting local site category. The standard deviation was in average 30% of the expected VS30 value. 相似文献
3.
An assessment of interactions between groundwater and surface water was carried out by applying two different modeling approaches to a small‐scale study area in the municipality of Havelock, Quebec. The first approach involved a commonly used sequential procedure that consists in determining the daily recharge rate using a quasi 2D infiltration model (HELP), applied in the next step as an imposed flux to a 3D finite‐element groundwater flow model. The flow model was calibrated under steady‐state and transient conditions against measured water levels. The second approach was based on a recently developed physically based, 3D fully coupled groundwater–surface water flow model (CATHY) applied to the entire flow domain in an integrated manner. Implementation, calibration, and results of the simulations for both approaches are presented and discussed. For equal annual precipitation (1038 mm/y) and evapotranspiration (556 mm/y), the second approach computed a recharge rate of 233 mm/y (8.9% higher than the first approach) and a net upward flow from the fractured aquifer (the first approach predicted a net downward flow to the rock). The simulated annual discharge was similar for the two approaches (9.6% difference). Both approaches were found to be useful in understanding the interactions between groundwater and surface water, although limitations are apparent in the sequential procedure's inability to account for surface–subsurface feedbacks, for instance near stream reaches where groundwater discharge is prevalent. The decoupled, two‐model approach provides disaggregated surface, vadose, and aquifer flows, and a simple aperçu at the different components of total discharge. The fully coupled model accounts for continuous water exchanges between the land surface, subsurface, and stream channel in a more complex manner, and produces a better match against observed data. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
4.
Natural Hazards - To investigate the propagation of meteorological droughts to agricultural and hydrological droughts, the relationship between droughts was analyzed using observed precipitation... 相似文献
5.
Many historic buildings in old urban centers in Eastern Canada are made of stone masonry reputed to be highly vulnerable to seismic loads.Seismic risk assessment of stone masonry buildings is therefore the first step in the risk mitigation process to provide adequate planning for retrofit and preservation of historical urban centers.This paper focuses on development of analytical displacement-based fragility curves reflecting the characteristics of existing stone masonry buildings in Eastern Canada.The old historic center of Quebec City has been selected as a typical study area.The standard fragility analysis combines the inelastic spectral displacement,a structure-dependent earthquake intensity measure,and the building damage state correlated to the induced building displacement.The proposed procedure consists of a three-step development process:(1) mechanics-based capacity model,(2) displacement-based damage model and(3) seismic demand model.The damage estimation for a uniform hazard scenario of 2% in 50 years probability of exceedance indicates that slight to moderate damage is the most probable damage experienced by these stone masonry buildings.Comparison is also made with fragility curves implicit in the seismic risk assessment tools Hazus and ELER.Hazus shows the highest probability of the occurrence of no to slight damage,whereas the highest probability of extensive and complete damage is predicted with ELER.This comparison shows the importance of the development of fragility curves specific to the generic construction characteristics in the study area and emphasizes the need for critical use of regional risk assessment tools and generated results. 相似文献
6.
Developing conceptual hydrogeological model for Potsdam sandstones in southwestern Quebec,Canada 总被引：1，自引：1，他引：0
A hydrogeological study was conducted in Potsdam sandstones on the international border between Canada (Quebec) and the USA (New York). Two sandstone formations, arkose and conglomerate (base) and well-cemented quartz arenite (upper), underlie the study area and form the major regional aquifer unit. Glacial till, littoral sand and gravel, and marine silt and clay discontinuously overlie the aquifer. In both sandstone formations, sub-horizontal bedding planes are ubiquitous and display significant hydraulic conductivities that are orders of magnitude more permeable than the intact rock matrix. Aquifer tests demonstrate that the two formations have similar bulk hydrologic properties, with average hydraulic conductivities ranging from 2?×?10?5 to 4?×?10?5 m/s. However, due to their different lithologic and structural characteristics, these two sandstones impose rather different controls on groundwater flow patterns in the study area. Flow is sustained through two types of fracture networks: sub-horizontal, laterally extensive fractures in the basal sandstone, where hydraulic connectivity is very good horizontally but very poor vertically and each of the water-bearing bedding planes can be considered as a separate planar two-dimensional aquifer unit; and the more fractured and vertically jointed system found in the upper sandstone that promotes a more dispersed, three-dimensional movement of groundwater. 相似文献
7.
Comparative study of methods for WHPA delineation 总被引：3，自引：0，他引：3
Paradis D Martel R Karanta G Lefebvre R Michaud Y Therrien R Nastev M 《Ground water》2007,45(2):158-167
Human activities, whether agricultural, industrial, commercial, or domestic, can contribute to ground water quality deterioration. In order to protect the ground water exploited by a production well, it is essential to develop a good knowledge of the flow system and to adequately delineate the area surrounding the well within which potential contamination sources should be managed. Many methods have been developed to delineate such a wellhead protection area (WHPA). The integration of more information on the geologic and hydrogeologic characteristics of the study area increases the precision of any given WHPA delineation method. From a practical point of view, the WHPA delineation methods allowing the simplest and least expensive integration of the available information should be favored. This paper presents a comparative study in which nine different WHPA delineation methods were applied to a well and a spring in an unconfined granular aquifer and to a well in a confined highly fractured rock aquifer. These methods range from simple approaches to complex computer models. Hydrogeological mapping and numerical modeling with MODFLOW-MODPATH were used as reference methods to respectively compare the delineation of the zone of contribution and the zone of travel obtained from the various WHPA methods. Although applied to simple ground water flow systems, these methods provided a relatively wide range of results. To allow a realistic delineation of the WHPA in aquifers of variable geometry, a WHPA delineation method should ensure a water balance and include observed or calculated regional flow characteristics. 相似文献
8.
Numerical simulation of groundwater flow in regional rock aquifers, southwestern Quebec, Canada 总被引：1，自引：1，他引：0
The St. Lawrence Lowlands platform, Quebec, Canada, is a densely-populated area, heavily dependent on groundwater resources. In 1999, the Geological Survey of Canada initiated a large-scale hydrogeological assessment study over a 1,500 km2 region northwest of Montreal. The objectives were to define the regional groundwater flow, and to give quantitative estimates of the groundwater dynamic parameters and of the available groundwater resources. The applied approach consisted of defining the hydrogeologic framework, hydraulic properties of the aquifer units, and groundwater dynamic components. Lower Paleozoic sedimentary rocks represent regional aquifer units. Coarse Quaternary fluvio-glacial sediments locally overlay the rock sequence and constitute an interface aquifer unit. Fine marine sediments confine most of the regional aquifers. Collected GIS based information was synthesized in a finite element numerical model. The regional saturated steady-state flow was calibrated under current stress conditions assuming an equivalent porous medium approach. Water budget calculations show that the total groundwater flow in regional aquifers amounts to 97.7 Mm3/y. Infiltration from precipitation provides 86.6% of the groundwater supply, while 9.6% comes from subsurface inflow and the remaining 3.8% is induced recharge from surface waters. Discharge from regional aquifers occurs through flow to streams (76.9%), groundwater withdrawal (18.4%), and underground outflow (4.7%).
Resumen La plataforma de Tierras Bajas San Lorenzo, Quebec, Canadá, es un área densamente poblada que depende fuertemente de recursos de agua subterránea. En 1999 el Servicio Geológico de Canadá inició un estudio de evaluación hidrogeológica a gran escala sobre un área de 1,500 km2 en la región noroeste de Montreal. Los objetivos fueron definir el flujo regional de agua subterránea y aportar estimados cuantitativos de los parámetros dinámicos de agua subterráne y de los recursos disponibles de agua subterránea. El enfoque aplicado consistió en definir el marco hidrogeológico, propiedades hidráulicas de las unidades acuíferas, y los componentes dinámicos de agua subterránea. Rocas sedimentarias del Paleozoico Inferior representan unidades regionales de acuíferos. Sedimentos fluvio-glaciares Cuaternarios gruesos sobreyacen localmente la secuencia rocosa y constituyen una unidad acuífera interfacial. Sedimentos marinos finos confinan la mayoría de acuíferos regionales. Información colectada basada en SIG se sintetizó en un modelo numérico de elemento finito. El flujo regional saturado en régimen permanente se calibró bajo condiciones de stress asumiendo un enfoque de medio poroso equivalente. Los cálculos de balance hídrico muestran que el flujo total de agua subterránea en acuíferos regional alcanza 97.7 Mm3/año. Infiltración a partir de lluvia aporta el 86.6% del abastecimiento al agua subterránea, mientras que el 9.6% proviene de entradas subsuperficiales y el restante 3.8% consiste de recarga inducida a partir de aguas superficiales. La descarga proveniente de acuíferos regionales ocurre a través de flujo a ríos (76.9%), utilización de agua subterránea (18.4%), y salida subterránea (4.7%).
Résumé La plateforme Lowllands du Saint-Laurent, Québec, Canada, est une aire densément peuplée, dépendant grandement des ressources en eau souterraine. En 1999, le Service Géologique du Canada a initié une étude hydrogéologique à grande-échelle sur 1500 km2 au Nord-Ouest de Montréal. Le sobjectifs ont été de définir la dynamique de lécoulement régional, et de donner des estimations quantitatives des paramètres dynamiques des ressources disponibles en eau souterraine. Lapproche utilisée consista à définir le cadre hydrogéologique de travail, les propriétés hydrauliques des unités aquifères, et les composantes dynamiques des eaux souterraines. Les roches sédimentaires du Paléozoïque Inférieur représentent les unités aquifères régionales. Les sédiments marins fins confinent la plus grande partie des aquifères régionaux. Les informations de base, collectées dans un SIG, ont été synthétisées dans un modèle numérique aux éléments finis. Lécoulement permanent régional, en zone saturée, a été calibré en conditions de stress en assumant une approche de milieu poreu équivalent. Les calculs du bilan hydrologique montrent que lécoulement total des eaux souterraines dans les aquifères régionaux atteind 97,7 Mm3/an. Linfiltration à partir des précipitations apporte 86.6% de leau souterraine exploitée; sachant que 9,6% proviennent découlement de subsurfaces, et que les 3,8% restants proviennent de la recharge via les eaux de surface. Le débit pompé des aquifères régionaux apparaît à travers lécoulement des cours deau, le rabattement des eaux souterraines (18.4%), et lécoulement ascendant (4.7%).相似文献
1