排序方式： 共有8条查询结果，搜索用时 15 毫秒
1
1.
A triaxial system is designed with a temperature range from-20 ℃ to 25 ℃ and a pressure range from 0 MPa to 30 MPa in order to improve the understanding of the mechanical properties of gas hydrate-bearing sediments.The mechanical properties of synthetic gas hydrate-bearing sediments (gas hydrate-kaolin clay mixture) were measured by using current experimental apparatus.The results indicate that:(1) the failure strength of gas hydrate-bearing sediments strongly depends on the temperature.The sediment’s strength increases with the decreases of temperature.(2) The maximum deviator stress increases linearly with the confining pressure at a low-pressure stage.However,it fluctuates at a high-pressure stage.(3) Maximum deviator stress increases with increasing strain rate,whereas the strain-stress curve has no tremendous change until the axial strain reaches approximately 0.5%.(4) The internal friction angles of gas hydrate-bearing sediments are not sensitive to kaolin volume ratio.The cohesion shows a high kaolin volume ratio dependency. 相似文献
2.
边界热质传递过程的主动传递(Active Transport)为由"低势"向"高势"的物量(包括质量、能量和信息等)传递,传递动力由边界内的其他能量(如化学反应等)或耦合作用提供,主动传递过程已经超越经典传热学和热力学的范围.基于Kedem分析方法,采用传热学和不可逆热力学理论相结合的方法研究边界热质传递过程的主动传递机理,提出耦合流、正耦合、负耦合和耦合程度等概念,并以两组分膜分离系统为例进行分析. 相似文献
3.
The objective of this study is to understand the process of fluid flow in pipe and porous media with different pore structures.High-resolution Magnetic Resonance Imaging(MRI)technique was used to visualize the pore structure and measure fluid flow.The porous media was formed by packed bed of glass beads.Flow measurement was carried out by a modified spin echo sequence.The results show that the velocity distribution in pipe is annular and the linear relation between MRI velocity and actual velocity is found in pipe flow measurement.The flow distribution in porous media is rather heterogeneous,and it is consistent with heterogeneous pore structure.The flow through pores with the high volume flow rate is determined largely by geometrical effects such as pore size and cross-sectional area. 相似文献
4.
本文基于海陆风环流的形成机制,在研究分析海陆风环流形成的物理模型基础上,建立了海陆风环流的数学模型。根据此基础,以大连地区海陆风环流为计算实例,模拟了海陆风形成的压力场、速度场、温度场和湍流动能场的日变化及太阳辐射日变化的过程地面的能量变化及导致的湍流动能的变化,预测出海陆风环流的水平湍流扩散系数和动量、温度和湍流动能的垂直湍流扩散系数,为求解海陆风中的污染物扩散浓度以进行环境污染损失评价提供参考。应用此模型,对大连地区的海陆风环流进行了数值模拟,定性与定量地给出了海陆风场中的速度、压力、温度及湍流动能分布情况和主要参数值。结果表明,海陆风环流的大气压力场局地日变化较小,温度场变化较明显。在中午前后,动量、温度和湍流动能的垂直扩散系数达到了最大值。模拟结果与其他文献模拟结果的对比表明,本文建立的模型模拟与实验的结果相符,但预测精度仍需要进一步检验。 相似文献
5.
热力学边界热质传递过程的促进传递(Facilitated Transport)可以强化热力学系统与外界的物量传递,进而影响系统内部的物量变化.提出热力学边界热质传递过程的促进传递和促进因子等概念,拓展边界热质传递过程的内涵,即促进传递过程是在边界内伴有可逆化学反应的强化传递过程,通过多个过程的耦合作用实现;讨论边界促进传递的分类和机理,并以质量促进传递过程为例分析促进传递过程.在传热学和热力学领域对促进传递过程研究应从传递机理、分析模型和应用等方面进行. 相似文献
6.
Experimental Investigation of the Decay from A Ship’s Propeller 总被引：1，自引：0，他引：1
In the present study,an experimental investigation of the decay of the maximum velocity and its turbulent characteristics behind a ship propeller,in "bollard pull" condition(zero speed of advance),is reported.Velocity measurements were performed in laboratory by use of a Laser Doppler Anemometry(LDA) measurement system.Earlier researchers described that the maximum axial velocity is constant at the initial stage of a ship’s propeller jet(Fuehrer and Rmisch,1977;Blaauw and van de Kaa,1978;Berger et al.,1981;Verhey,1983) as reported in a pure water jet(Albertson et al.,1950;Lee et al.,2002;Dai,2005),but a number of researchers disagreed with the constant velocity assumption.The present study found that the maximum axial velocity decays in the zone of flow establishment and the zone of established flow with different rates.The investigation provides an insight into the decays of both the maximum velocity and the maximum turbulent fluctuation in axial,tangential and radial components and the decay of the maximum turbulent kinetic energy.Empirical equations are proposed to allow coastal engineers to estimate the jet characteristics from a ship’s propeller. 相似文献
7.
2-D Numerical Simulation of Natural Gas Hydrate Decomposition Through Depressurization by Fully Implicit Method 总被引：1，自引：0，他引：1
Natural gas hydrate, as a potential energy resource, deposits in permafrost and marine sediment with large quantities. The current exploitation methods include depressurization, thermal stimulation, and inhibitor injection. However, many issues have to be resolved before the commercial production. In the present study, a 2-D axisymmetric simulator for gas production from hydrate reservoirs is developed. The simulator includes equations of conductive and convective heat transfer, kinetic of hydrate decomposi... 相似文献
8.
Natural gas hydrate, as a potential energy resource, deposits in permafrost and marine sediment with large quantities. The current exploitation methods include depressurization, thermal stimulation, and inhibitor injection. However, many issues have to be resolved before the commercial production. In the present study, a 2-D axisymmetric simulator for gas production from hydrate reservoirs is developed. The simulator includes equations of conductive and convective heat transfer, kinetic of hydrate decomposition, and multiphase flow. These equations are discretized based on the finite difference method and are solved with the fully implicit simultaneous solution method. The process of laboratory-scale hydrate decomposition by depressurization is simulated. For different surrounding temperatures and outlet pressures, time evolutions of gas and water generations during hydrate dissociation are evaluated, and variations of temperature, pressure, and multiphase fluid flow conditions are analyzed. The results suggest that the rate of heat transfer plays an important role in the process. Furthermore, high surrounding temperature and low outlet valve pressure may increase the rate of hydrate dissociation with insignificant impact on final cumulative gas volume. 相似文献
1