Chemical and biological features of the saline Lake Krasnovishnevoye (Baraba,Russia) in comparison with Lake Malinovoe (Kulunda,Russia): a reconnaissance study     

Komova  Anastasia  Melnikova  Anna  Namsaraev  Zorigto  Romanov  Roman  Strakhovenko  Vera  Ovdina  Ekaterina  Ermolaeva  Nadezhda 《中国海洋湖沼学报》2018,36(6):1993-2001

The Baraba and Kulunda steppes are located in southwestern Siberia in an area with an arid continental climate. This paper presents results of the first study of the hypersaline Lake Krasnovishnevoye(Baraba steppe, TDS(total dissolved solids)=297 g/L, pH 7.88). The major chemical, mineralogical and biological features of the lake were studied and compared to those of Lake Malinovoe, a typical saline neutral lake of Kulunda steppe(TDS=396 g/L, pH 7.63). The phytoplankton composition and the culturable diversity of anoxygenic phototrophic bacteria from Lake Krasnovishnevoye correspond to the ones in the Kulunda lakes. Nevertheless, the peculiarities of water composition and regime of Lake Krasnovishnevoye reduce the biodiversity to prokaryotes and unicellular algae.  相似文献   

Fine-resolution analysis of exoplanetary distributions by wavelets: hints of an overshooting iceline accumulation     

Roman V. Baluev  Vakhit S. Shaidulin 《Astrophysics and Space Science》2018,363(9):192

We investigate 1D exoplanetary distributions using a novel analysis algorithm based on the continuous wavelet transform. The analysis pipeline includes an estimation of the wavelet transform of the probability density function (p.d.f.) without pre-binning, use of optimized wavelets, a rigorous significance testing of the patterns revealed in the p.d.f., and an optimized minimum-noise reconstruction of the p.d.f. via matching pursuit iterations.In the distribution of orbital periods, \(P\), our analysis revealed a narrow subfamily of exoplanets within the broad family of “warm Jupiters”, or massive giants with \(P\gtrsim 300~\mbox{d}\), which are often deemed to be related with the iceline accumulation in a protoplanetary disk. We detected a p.d.f. pattern that represents an upturn followed by an overshooting peak spanning \(P\sim 300\mbox{--}600~\mbox{d}\), right beyond the “period valley”. It is separated from the other planets by p.d.f. concavities from both sides. It has at least 2-sigma significance.In the distribution of planet radii, \(R\), and using the California Kepler Survey sample properly cleaned, we confirm the hints of a bimodality with two peaks about \(R=1.3R_{\oplus }\) and \(R=2.4R_{ \oplus }\), and the “evaporation valley” between them. However, we obtain just a modest significance for this pattern, 2-sigma only at the best. Besides, our follow-up application of the Hartigan and Hartigan dip test for unimodality returns 3 per cent false alarm probability (merely 2.2-sigma significance), contrary to 0.14 per cent (or 3.2-sigma), as claimed by Fulton et al. (2017).  相似文献   

Quantifying flow resistance in mountain streams using computational fluid dynamics modeling over structure-from-motion photogrammetry-derived microtopography     

Yunxiang Chen  Roman A. DiBiase  Nicholas McCarroll  Xiaofeng Liu 《地球表面变化过程与地形》2019,44(10):1973-1987

Flow resistance in mountain streams is important for assessing flooding hazard and quantifying sediment transport and bedrock incision in upland landscapes. In such settings, flow resistance is sensitive to grain-scale roughness, which has traditionally been characterized by particle size distributions derived from laborious point counts of streambed sediment. Developing a general framework for rapid quantification of resistance in mountain streams is still a challenge. Here we present a semi-automated workflow that combines millimeter- to centimeter-scale structure-from-motion (SfM) photogrammetry surveys of bed topography and computational fluid dynamics (CFD) simulations to better evaluate surface roughness and rapidly quantify flow resistance in mountain streams. The workflow was applied to three field sites of gravel, cobble, and boulder-bedded channels with a wide range of grain size, sorting, and shape. Large-eddy simulations with body-fitted meshes generated from SfM photogrammetry-derived surfaces were performed to quantify flow resistance. The analysis of bed microtopography using a second-order structure function identified three scaling regimes that corresponded to important roughness length scales and surface complexity contributing to flow resistance. The standard deviation σ_z of detrended streambed elevation normalized by water depth, as a proxy for the vertical roughness length scale, emerges as the primary control on flow resistance and is furthermore tied to the characteristic length scale of rough surface-generated vortices. Horizontal length scales and surface complexity are secondary controls on flow resistance. A new resistance predictor linking water depth and vertical roughness scale, i.e.  H/σ_z, is proposed based on the comparison between σ_z and the characteristic length scale of vortex shedding. In addition, representing streambeds using digital elevation models (DEM) is appropriate for well-sorted streambeds, but not for poorly sorted ones under shallow and medium flow depth conditions due to the missing local overhanging features captured by fully 3D meshes which modulate local pressure gradient and thus bulk flow separation and pressure distribution. An appraisal of the mesh resolution effect on flow resistance shows that the SfM photogrammetry data resolution and the optimal CFD mesh size should be about 1/7 to 1/14 of the standard deviation of bed elevation. © 2019 John Wiley & Sons, Ltd.  相似文献   

Stability analysis of shotcrete supported crown of NATM tunnels with discontinuity layout optimization          下载免费PDF全文

Yiming Zhang  Xiaoying Zhuang  Roman Lackner 《国际地质力学数值与分析法杂志》2018,42(11):1199-1216

For tunnel constructed by New Austrian Tunnelling Method, the crown is the upper part of tunnel section, constructed during excavation process and supported by shotcrete. The stability of the crown has great influence on the safety of tunnel itself and the buildings above, which correlates, among others, with geometrical setup of tunnel and material properties of shotcrete and soil/rock. In this paper, aiming at analyzing the stability of shotcrete supported crown, a recently presented numerical method discontinuity layout optimization is adopted, which introduces a great amount of potential discontinuities cross over one another and provides a wide search space for efficient upper limit analysis. In the analysis, a well‐established hydration model of cementitious material is implemented for accounting the hydration of shotcrete. Then assumptions based on convergence‐confinement method are used for accounting the 3‐dimensional effect in 2‐dimensional analysis, finally providing time‐space–dependent assessments of stability of shotcrete supported crown.  相似文献   

Anthropogenic impact in the Maya Lowlands of Petén,Guatemala, during the last 5500 years          下载免费PDF全文

D. Battistel  M. Roman  A. Marchetti  N. M. Kehrwald  M. Radaelli  E. Balliana  G. Toscano  C. Barbante 《第四纪科学杂志》2018,33(2):166-176

  相似文献   

Meridional Motion and Reynolds Stress from Debrecen Photoheliographic Data     

Davor Sudar  Roman Brajša  Ivica Skokić  Ivana Poljančić Beljan  Hubertus Wöhl 《Solar physics》2017,292(7):86

The Debrecen Photoheliographic Data catalogue is a continuation of the Greenwich Photoheliographic Results providing daily positions of sunspots and sunspot groups. We analyse the data for sunspot groups focussing on meridional motions and transfer of angular momentum towards the solar equator. Velocities are calculated with a daily shift method including an automatic iterative process of removing the outliers. Apart from the standard differential rotation profile, we find meridional motion directed towards the zone of solar activity. The difference in measured meridional flow in comparison to Doppler measurements and some other tracer measurements is interpreted as a consequence of different flow patterns inside and outside of active regions. We also find a statistically significant dependence of meridional motion on rotation velocity residuals confirming the transfer of angular momentum towards the equator. Analysis of horizontal Reynolds stress reveals that the transfer of angular momentum is stronger with increasing latitude up to about \(40^{\circ}\), where there is a possible maximum in absolute value.  相似文献   

Implications for behavior of volatile elements during impacts—Zinc and copper systematics in sediments from the Ries impact structure and central European tektites          下载免费PDF全文

Zuzana Rodovská  Tomáš Magna  Karel Žák  Chizu Kato  Paul S. Savage  Frédéric Moynier  Roman Skála  Josef Ježek 《Meteoritics & planetary science》2017,52(10):2178-2192

Moldavites are tektites genetically related to the Ries impact structure, located in Central Europe, but the source materials and the processes related to the chemical fractionation of moldavites are not fully constrained. To further understand moldavite genesis, the Cu and Zn abundances and isotope compositions were measured in a suite of tektites from four different substrewn fields (South Bohemia, Moravia, Cheb Basin, Lusatia) and chemically diverse sediments from the surroundings of the Ries impact structure. Moldavites are slightly depleted in Zn (~10–20%) and distinctly depleted in Cu (>90%) relative to supposed sedimentary precursors. Moreover, the moldavites show a wide range in δ⁶⁶Zn values between 1.7 and 3.7‰ (relative to JMC 3‐0749 Lyon) and δ⁶⁵Cu values between 1.6 and 12.5‰ (relative to NIST SRM 976) and are thus enriched in heavy isotopes relative to their possible parent sedimentary sources (δ⁶⁶Zn = ?0.07 to +0.64‰; δ⁶⁵Cu = ?0.4 to +0.7‰). In particular, the Cheb Basin moldavites show some of the highest δ⁶⁵Cu values (up to 12.5‰) ever observed in natural samples. The relative magnitude of isotope fractionation for Cu and Zn seen here is opposite to oxygen‐poor environments such as the Moon where Zn is significantly more isotopically fractionated than Cu. One possibility is that monovalent Cu diffuses faster than divalent Zn in the reduced melt and diffusion will not affect the extent of Zn isotope fractionation. These observations imply that the capability of forming a redox environment may aid in volatilizing some elements, accompanied by isotope fractionation, during the impact process. The greater extent of elemental depletion, coupled with isotope fractionation of more refractory Cu relative to Zn, may also hinge on the presence of carbonyl species of transition metals and electromagnetic charge, which could exist in the impact‐induced high‐velocity jet of vapor and melts.  相似文献   

Anthropogenic particle dispersions in topsoils of the Middle Nile Delta: a preliminary study on the contamination around industrial and commercial areas in Egypt     

Atef M. Abu Khatita  Helga de Wall  Roman Koch 《Environmental Earth Sciences》2016,75(3):264

  相似文献   

Multidimensional Toxicity of Rhamnolipid Extracts Obtained From Creosote‐Contaminated Soil          下载免费PDF全文

Zuzanna Sydow  Piotr Lisiecki  Justyna Staninska‐Pięta  Anna Olejnik  Paweł Cyplik  Agnieszka Zgoła‐Grześkowiak  Roman Marecik  Jacek Nowak  Katarzyna Glazar  Agnieszka Piotrowska‐Cyplik 《洁净——土壤、空气、水》2018,46(5)

  相似文献   

Composition and origin of organic matter in surface sediments of Lake Sarbsko: A highly eutrophic and shallow coastal lake (northern Poland)   总被引：1，自引：0，他引：1  

Micha? Woszczyk  Achim Bechtel  Reinhard Gratzer  Maciej J. Kotarba  Miko?aj Kokociński  Jens Fiebig  Roman Cie?liński 《Organic Geochemistry》2011,42(9):1025-1038

We present an organic geochemical study of surface sediments of Lake Sarbsko, a shallow coastal lake on the middle Polish Baltic coast. The aim was to provide evidence concerning the origin of the organic matter (OM) and its compositional diversity in surface deposits of this very productive, highly dynamic water body. The content and composition of the OM in the bottom sediments were investigated at 11 sampling stations throughout the lake basin. OM sources were assigned on the basis of bulk indicators [total organic carbon (TOC), total nitrogen (TN), δ¹³C_TOC and δ¹⁵N and extractable OM yield], biomarker composition of extractable OM and compound-specific C isotope signatures. The source characterization of autochthonous compounds was verified via phytoplankton analysis. The distribution of gaseous hydrocarbons in the sediments, as well as temporal changes in lake water pH, the concentration of DIC (dissolved inorganic carbon) and δ¹³C_DIC were used to trace OM decomposition.The sedimentary OM is composed mainly of well preserved phytoplankton compounds and shows minor spatial variability in composition. However, the presence of CH₄ and CO₂ in the bottom deposits provides evidence for microbial degradation of sedimentary OM. The transformation of organic compounds in surface, bottom and pore waters via oxidative processes influences carbonate equilibrium in the lake and seasonally favours precipitation or dissolution of CaCO₃.The data enhance our understanding of the relationships between the composition of sedimentary OM and environmental conditions within coastal ecosystems and shed light on the reliability of OM proxies for environmental reconstruction of coastal lakes.  相似文献