How soil texture,channel shape and cross-sectional area affect moisture dynamics and water loss in irrigation channels     

Zhifan Mu  Tianxiao Li  Dong Liu  Qiang Fu  Renjie Hou  Qinglin Li  Yi Ji  Song Cui  Mo Li 《水文研究》2021,35(4):e14155

To enhance the utilization efficiency of farmland irrigation water and reduce the leakage of water conveyance channels, the leakage process of channels was simulated dynamically. The simulated results were compared with data measured in laboratory experiments, and the performance of the model was evaluated. The results indicated that the simulated values of the model were consistent with the observation values, and the R² values varied between 0.91 and 0.99. In addition, based on the laboratory experiments, a water supply system (Mariotte bottles) and soil box were built using plexiglass. Three influencing factors, namely, the channel form, soil texture and channel cross-sectional area, were varied to observe and calculate the resulting cumulative infiltration amount, infiltration rate and wetting front migration distance. HYDRUS-3D software was used to solve the three-dimensional soil water movement equation under different initial conditions. The results demonstrated that the U-shaped channel was more effective than the trapezoidal channel in increasing the utilization efficiency of the water resources. A U-shaped channel with a small channel cross-sectional area should be adopted and the soil particle size should be prioritized in the construction of water conveyance channels for farmlands. The simulation results were in agreement with the observed results, which indicates that HYDRUS-3D is a reliable tool that can accurately simulate the soil moisture movement in water conveyance channels. The research results can provide a reference for the design and operation of farmland irrigation systems.  相似文献   

马尔科夫链分析在东海陆架盆地花港组沉积微相分析中的应用     

胡求红  张昌民  侯国伟  朱锐  陈哲 《地质与资源》2020,29(1):7-20

通过对东海陆架盆地某凹陷取心井岩心仔细观察和描述，采用双属性划分标准，在研究区花港组岩心中识别出了28种岩石相类型.其中砾岩相5种，砂岩相15种，细粒岩相8种.针对22口取心井岩心详细划分沉积微相和岩石相，共取得2227个岩石相数据.针对研究区发育的湖泊、三角洲、河流3种沉积体系，运用马尔科夫链分析不同沉积微相类型中岩石相沉积序列模式，建立了不同沉积微相类型可能的岩石相组合规律及岩石相定量组合概率，为后期研究相同或相似类型的沉积相提供地质知识库，并为沉积相的识别提供定量的基础.  相似文献   

内蒙古碾子沟钼矿床成矿流体来源、演化及成矿机理     

孙丰月  王睿  王一存  李顺达  王可勇  石开拓  孙清飞  王文元 《吉林大学学报(地球科学版)》2020,50(3):768-780

内蒙古自治区碾子沟钼矿床地处华北地台北缘西拉木伦钼成矿带西段，为一典型的中型石英脉型钼矿床。该钼矿床矿脉（体）主要产于燕山早期二长花岗岩-钾长花岗岩内NNW、NW向断裂构造体系之中，成矿作用过程经历了黄铁矿±辉钼矿＋石英（Ⅰ）、辉钼矿＋黄铁矿±黄铜矿＋石英（Ⅱ）、黄铜矿＋黄铁矿±闪锌矿＋石英（Ⅲ）及石英±方解石（Ⅳ）4个阶段。系统的流体包裹体岩相学、包裹体组分析、包裹体显微测温研究表明，矿床初始成矿流体为高温、中低盐度（490~550℃，盐度（w（NaC1））2%~10%，50~62 MPa）均匀的NaCl-H₂O体系热液，δ¹⁸O_H2O-SMOW（2.21‰）及δD_H2O-SMOW（-68.9‰）表明其主要来源于岩浆热液；成矿流体上升并不断汇聚于容矿断裂空间，伴随温度、压力降低（380~460℃，26~40 MPa→360~420℃，25~30 MPa）而进入两相不混溶区，流体开始发生沸腾→强烈沸腾作用，导致成矿元素Mo大量沉淀富集成矿，成矿晚期残余流体与大气降水混合（δ¹⁸O_H2O-SMOW为-2.41‰~2.51‰，δD_H2O-SMOW为-110.1‰~-105.5‰），矿床属燕山早期中高温岩浆热液型钼矿床。  相似文献   

2007-2017年中国沙尘气溶胶的三维分布特征及输送过程     

贾瑞  刘玉芝  吴楚樵  祝清哲  汪兵 《中国沙漠》2019,39(6):108-117

利用最新发布的CALIPSO产品，构建了2007-2017年中国沙尘气溶胶的三维分布，并结合HYSPLIT-4模式和再分析数据，探讨了沙尘的三维输送过程。结果表明：中国的沙尘排放源区主要是塔克拉玛干沙漠和巴丹吉林沙漠，沙尘气溶胶出现频率分别为60%和35%。塔克拉玛干沙漠排放的沙尘主要（50%~70%）停留在源地0~6 000 m高度，少部分向东输送至甘肃和内蒙古；巴丹吉林沙漠排放的沙尘则主要向东输送。中国沙尘排放量在春季最大，向东输送最强；夏季，东亚夏季风限制了沙尘向东输送；秋季，沙尘排放减弱，输送强度和夏季相当；沙尘排放量在冬季最小，输送最弱。夏季，沙尘在输送过程中可被抬升至高度5 000 m以上，春季次之，秋、冬季的沙尘主要在低层大气输送。沙尘在向东输送的过程中被抬升并和当地人为污染物混合变为污染性沙尘，华北地区污染性沙尘出现频率高达30%；输送到海洋的沙尘也会与洋面上（0~3 000 m高度）的海盐气溶胶混合，出现频率约为10%。  相似文献   

琼东南盆地华光凹陷天然气水合物稳定带厚度的影响因素     

刘杰  杨睿  邬黛黛  金光荣  张辉 《海洋学报》2019,41(8):13-25

为了探讨琼东南盆地华光凹陷海底天然气水合物稳定带的分布规律，定量研究了静水压力、底水温度、地温梯度和气源组分对水合物稳定带的影响程度。在此基础上，分析了华光凹陷现今甲烷水合物稳定带的厚度分布。最后，综合各因素的历史演化过程，初步探讨了华光凹陷1.05 Ma BP以来天然气水合物稳定带的演化。结果表明:(1)气源组分和海底温度的变化对研究区内水合物稳定带的影响较大；水合物稳定带厚度与海底温度呈良好的线性负相关性。(2)水深超过600 m的海域具备形成天然气水合物的温压条件；超过600 m水深的海域水合物稳定带厚度大部分超过 100 m，其中西北部稳定带的最大厚度超过300 m，是有利的水合物勘探区。(3)华光凹陷1.05 Ma BP以来天然气水合物稳定带厚度经历了快速增厚–窄幅变化–快速减薄和恢复的过程。麻坑群与水合物稳定变化敏感区在空间上具有较好的叠合关系。结合前人的研究成果，推测其形成与天然气水合物的分解释放有关。  相似文献   

基于混合聚类的岩体结构面优势分组方法     

许扬  张文  符锐  聂振邦  兰志广  陈怀玉  单博 《世界地质》2020,39(1):113-120

提出一种基于凝聚层次法和模糊C均值法的混合聚类法,用于对岩体结构面的优势组划分。该方法将结构面投放到在单位球面上,并使用欧式距离作为极点的相似性度量准则。先剔除结构面数据中的孤值产状,然后用凝聚层次法得到初步聚类结果,并将其作为FCM法的初始聚类中心,最后用FCM法划分优势组。通对人工生成产状样本的分组,验证了该法的正确性。将该方法应用于大藤峡坝址区实测的结构面数据的划分。在实测数据中寻找到两个孤值产状,成功将大藤峡D1y^1-3地层岩体结构面划分为两组,得到了符合实际的分组结果。  相似文献   

Variation in the vertical zonality of erodibility and critical shear stress of rill erosion in China's Hengduan Mountains     

Zhengan Su  Donghong Xiong  Jianhui Zhang  Tao Zhou  Hongkun Yang  Yifan Dong  Haidong Fang  Liangtao Shi 《地球表面变化过程与地形》2019,44(1):88-97

Soil erodibility is an essential parameter used in soil erosion prediction. This study selected the Liangshan town watershed to quantify variation in the vertical zonality of rill erodibility (k_r) in China's ecologically fragile Hengduan Mountains. Soil types comprised of yellow–brown (soil A), purple (soil B), and dry-red (soil C) in a descending order of occurrence from the summit to the valley, which roughly corresponds to the vertical climate zone (i.e. cool-high mountain, warm-low mountain, and dry-hot valley sections) of the study area. With elevation, vertical soil zonality varied in both soil organic matter (SOM) content and soil particle-size fractions. A series of rill erosion-based scour experiments were conducted, using water discharge rates of 100, 200, 300, 400, 500, and 600 mL min^-1. Additionally, detachment rates (Dr) were measured under three hydrological conditions (the drainage, saturation, and seepage treatments). Results show that both Dr and flow shear stress (Ʈ) values increased as discharge increased. As elevation increased, the k_r values decreased, while the vertical zonality of critical shear stress (Ʈ_c) values showed no obvious variation. The highest k_r values were observed during the seepage treatment, followed by the saturation treatment then drainage treatment, indicating that variation in vertical hydraulic gradients could significantly alter k_r values. This study also found that land-use types could also alter k_r and Ʈ_c values. Further research, however, is necessary to better quantify the effects of subsurface hydrological conditions and land-use types on k_r under different soil zonalities in China's Hengduan Mountains. © 2018 John Wiley & Sons, Ltd.  相似文献   

Temporal-Spatial Variation of Surface Suspended Matter and Controlling Factors in the Inner Shelf of the East China Sea in Winter     

MIN Jianxiong  LI Guangxue  DING Dong  QIAO Lulu  MA Yanyan  YANG Gang  ZHANG Yaqi  ZHANG Lei  LI Shuhao 《中国海洋大学学报(英文版)》2019,(1)

Based on the observed surface suspended matter in the East China Sea in February 2007 and June 2015, an empirical model was established using L1 b's band 4 data to retrieve surface suspended matter from the Moderate Resolution Imagine Spectroradiometer Terra imagery. The squared correlation coefficient is 0.8358, and the root mean square error is 0.4285 mg L-1. The model reflects the distribution characteristics of surface suspended matter in the inner shelf of the East China Sea. In this paper, the satellite images of the study area were retrieved in January from 2001 to 2015, and the monthly distribution of surface suspended matter were obtained. The inter-annual distribution of the study area is similar, and the concentration of surface suspended matter is higher near the shore than offshore. A large amount of surface suspended matter is transported southeast under the influence of Zhejiang and Fujian coastal current and Taiwan warm current. Only a small amount of surface suspension can reach the Kuroshio area. The surface suspended matter concentration changes obviously near the estuary because of the effect of differences in the flux of the Yangtze River. Meanwhile, winter monsoon, temperature front, El Ni?o events, and other factors affect the distribution of surface suspended matter in 100 m isobath to coastal water but minimally influence the distribution in 100 m isobath to deep sea.  相似文献   

套管锻铣开窗技术在土耳其贝帕扎里碱矿中的应用          下载免费PDF全文

林修阔  刘汪威  陈晓林  刘志强  隆东 《探矿工程》2020,47(8):50-56

土耳其贝帕扎里碱矿在矿区边缘的碱层出现埋深起伏大、厚度变化大、易尖灭、易涌水等情况，这些特殊的地质情况导致水溶开采钻井过程中同一组井的套管最终下入到了不同的层位，或是原先下入的矿层不稳定，易坍塌。为了解决以上问题而引入了套管锻铣开窗技术。该技术可以将老井眼中已被套管封闭的上部碱层暴露出来形成新的采矿通道，从而提高矿区采收率。先后在14口老井眼中完成了套管锻铣作业，均达到了预期效果。本文介绍了套管锻铣器的工作原理，并以H066井组为例，详细阐述了套管锻铣开窗工艺技术。工程实践表明，套管锻铣开窗技术对于换层开采、钻井处理事故、事故井恢复性生产等方面具有一定的效果，具有减少钻井工期、降低施工成本、延长老井使用寿命、提高矿藏产量等优点，有广阔的应用前景。  相似文献   

Application of Avaatech X-ray fluorescence core-scanning in Sr/Ca analysis of speleothems     

Dong LI  Liangcheng TAN  Fei GUO  Yanjun CAI  Youbin SUN  Gang XUE  Xing CHENG  Hong YAN  Hai CHENG  R.Lawrence EDWARDS  Yongli GAO  Jessica KELLEY 《中国科学:地球科学(英文版)》2019,(6)

Application of X-ray fluorescence core-scanning(XRF-CS) on both marine and lake sediments has achieved remarkable results. However, its application has not been widely extended to the research on speleothems. In this study, we measure the Sr abundance and the Sr/Ca ratios of three stalagmites(two aragonite stalagmites, one calcite stalagmite) using the state-of-the-art fourth-generation Avaatech high-resolution XRF core scanner. Through comparisons among different scan paths and among different scan resolutions, as well as comparisons with inductively coupled plasma optical emission spectrometer(ICP-OES), Itrax XRF, and Artax XRF results, we confirm that the Avaatech XRF core scanner could precisely, quickly, and nondestructively analyze the high-resolution Sr abundance of speleothems. Furthermore, we combine the stalagmite δ~(18)O records to explore the paleoclimatic significance of the measured stalagmite Sr/Ca.  相似文献