排序方式： 共有32条查询结果，搜索用时 281 毫秒
1.
Dagasan Yasin Renard Philippe Straubhaar Julien Erten Oktay Topal Erkan 《Natural Resources Research》2019,28(1):153-171
Natural Resources Research - Geological contacts in lateritic metal deposits (footwall topographies) often delineate the orebody boundaries. Spatial variations seen in such contacts are frequently... 相似文献
2.
GIS-based detachment susceptibility analyses of a cut slope in limestone, Ankara—Turkey 总被引：3，自引：0，他引：3
Due to the rapidly growing population of the city of Ankara (Turkey) and increased traffic congestion, it has become necessary to widen the Ankara-Eskişehir (E-90) highway connecting the newly built areas west of the city to the city center. During widening, several cut slopes were formed along the highway route. As a result, some instability problems (small-sized rock falls/sliding, sloughing, raveling) produced detachment zones along a cut slope in highly jointed, folded and sheared limestone, causing local degradation of the cut slope. Identification of the areas that are likely to detach from the cut slope in the future is considered to be very important for the application of remedial measures. For this purpose, the relationships between the existing detachment zones and various parameters (e.g., point load strength index, weathering, block size, daylighting, shear zone) were investigated using GIS-based statistical detachment susceptibility analyses in order to predict the further aerial extension of the detachment zones with time. During the overlay analyses, statistical index and weighting factor methods were used. The outcomes of the analyses were compared and evaluated with the field observations to check the reliability of the methods and to assess the detachment zones that may develop in the future. The detachment susceptibility map without the block-size layer gives the best result and indicates some risky zones where detachments are likely to occur in the future. Recommendations on remedial measures of the cut slope should consider these risky zones. 相似文献
3.
4.
Natural Hazards - Cut slope surfaces are affected by excavation activities and weathering agents. Disturbances on the surface can penetrate down to a certain depth. Slope stability analyses made on... 相似文献
5.
The paper principally focuses on the durability assessment of various stratigraphic levels of Ahlat ignimbrites collected from the eastern region of Turkey. A total of four different ignimbrite types with dissimilar color, texture and particularly welding degree were tested in laboratory. The laboratory tests performed on the ignimbrite specimens indicate that the welding degree as well as the lithic material content mainly controls the strength and capillarity properties of the ignimbrites. In addition, the durability of highly porous ignimbrites strongly depends upon the degree of welding. The effect of several weathering agents on the ignimbrites was evaluated on the basis of decay constant parameter. Accordingly, salt and ice crystallization pressures are a couple of major destructive agents acting within the micropores of the ignimbrites. Conversely, the investigated specimens are relatively durable against cyclic wetting–drying. Statistical evaluations reveal that the pore diameter is the major controlling factor on the deterioration rate of the ignimbrites after specifically recurrent freeze–thaw cycles. Moreover, the dry unit weight of the ignimbrites is more significant than the uniaxial compressive strength considering the deterioration rates during wetting–drying and salt crystallization. A less significant relationship was obtained between pore diameter and salt crystallization decay constant. 相似文献
6.
GIS-based landslide susceptibility mapping using bivariate statistical analysis in Devrek (Zonguldak-Turkey) 总被引：15，自引：10，他引：5
Devrek town with increasing population is located in a hillslope area where some landslides exist. Therefore, landslide susceptibility
map of the area is required. The purpose of this study was to generate a landslide susceptibility map using a bivariate statistical
index and evaluate and compare the results of the statistical analysis conducted with three different approaches in seed cell
concept resulting in different data sets in Geographical Information Systems (GIS) based landslide susceptibility mapping
applied to the Devrek region. The data sets are created from the seed cells of (a) crowns and flanks, (b) only crowns, and
(c) only flanks of the landslides by using ten different causative parameters of the study area. To increase the data dependency
of the analysis, all parameter maps are classified into equal frequency classes based directly on the percentile divisions
of each corresponding seed cell data set. The resultant maps of the landslide susceptibility analysis indicate that all data
sets produce fairly acceptable results. In each data set analysis, elevation, lithology, slope, aspect, and drainage density
parameters are found to be the most contributing factors in landslide occurrences. The results of the three data sets are
compared using Seed Cell Area Indexes (SCAI). This comparison shows that the crown data set produces the most accurate and
successful landslide susceptibility map of the study area. 相似文献
7.
In this study, it was aimed to determine the effect of various aeration rates on composting to supply the optimum aeration rate for a successful and economic composting. For this aim, vegetable–fruit wastes (VFW) were composted at various aeration rates (0.37, 0.49, 0.62, 0.74, 0.86, and 0.99 L/min kg VS) and moisture, temperature, pH, electrical conductivity, C/N, and cellulose were investigated. Moistures of the reactor that had the highest aeration were generally lower than those of the others. Reactor that had the lowest aeration reached thermophilic phase earlier than the others and stayed more days. This situation was opposite for the reactor that had the highest aeration. pH variations with aeration rates were not significant. Although electrical conductivity did not differ significantly with aeration rates, at the beginning of the thermophilic phase it generally increased with the increase in aeration. The highest C/N reduction was observed in the reactor that had an aeration of 0.62 L/min kg VS. The final cellulose contents were close to each other. It could be said that aeration rates used were efficient on composting of VFW. Taking the C/N into account which is the parameter of the indicator of the stabilization in composting, it could be said that the optimum aeration rate for forced aerobic composting of VFW was 0.62 L/min kg VS. 相似文献
8.
9.
Resat Ulusay Candan Gokceoglu Tamer Topal Harun Sonmez Ergün Tuncay Zeynal Abiddin Erguler Ozgu Kasmer 《Environmental Geology》2006,50(4):473-494
The Cappadocia Region of Central Anatolia having a very distinct culture is one of the attractive touristic sites of Turkey due to its spectacular and unique landforms and historical heritages. In this region, the structures carved into thick to massive tuffs survived and kept their original integrity for a number of centuries. Environmental and anthropological factors at the Cappadocia Region have been the main reasons for extensive subsurface and multi-purpose use in the past and present. In addition, thermal insulation properties of the tuffs make these rocks suitable for use in underground openings. The Kayakapi Neighborhood, located in the town of Urgüp, is one of the famous historical sites. This site is situated within the “Göreme National Park and the Rock Sites of Cappadocia” which was inscribed on the World Heritage List in 1985. In order to develop the tourism potential of this abandoned site while preserving its cultural and natural values, a natural environmental conservation and revitalization project was initiated. As an integral part of this project, in this study, environmental and engineering geological problems, including rock fall potential and stability of about 1,200 rock-hewn structures, were investigated and an inventory was prepared for the possible re-use of the underground openings and other structures at the site, and remedial measures were recommended. The assessments based on observations and experimental studies indicated that the tuffs do not show significant changes both perpendicular and parallel to layering, and discontinuities and rock weathering seem to be more important factors controlling the stability of rock-hewn structures. The major stability problems threatening the re-use of the openings are structurally-controlled block instabilities, overbreaks, and erosion and shearing of the pillars made of tuff. On the other hand, the area at the entrance of the site requires some protection measures such as the construction of a retaining wall, systematic bolting of rock slabs and removal of some blocks having rock fall potential. The inventory for the openings suggests that there are a number of openings that can be re-used after necessary remedial measures. 相似文献
10.
Analyses of deterioration of the Cappadocian tuff, Turkey 总被引：8，自引：3，他引：5
The Cappadocian tuff contains unique erosional features, the so-called fairy chimneys, some of which in the past were dwelled
in and contain valuable wall paintings. These historical heritages, however, are undergoing chemical and physical deterioration
due to atmospheric effects. For the conservation studies, understanding of the deterioration phenomenon of the tuff is essential.
In this study, engineering geological and physicochemical characteristics of the tuff were determined. The durability of the
tuff was assessed through wetting-drying, freezing-thawing, and salt crystallization. The test results suggest that chemical
weathering may be traced to a depth of 2 cm below lichen-covered surfaces and 20 cm adjacent to discolored joint walls. Based
on durability assessment methods, the tuff may be classified as having poor to very poor durability.
Received: 16 December 1996 · Accepted: 3 April 1997 相似文献