排序方式： 共有16条查询结果，搜索用时 0 毫秒
1.
The objective in this experimental work is to evaluate the capability of several cylindrical buoys to follow and measure waves. Eleven configurations have been studied, eight among which were furnished with disks of different diameters at the waterline. The experiments took place in the test basin at ISITV. On the one hand, we have obtained a set of transfer coefficients for each frequency and each configuration in regular waves. On the other hand, we have determined the corresponding transfer functions, then we have used the latter to measure irregular waves. The time signals as measured by the buoys with and without corrections have been compared with wave gage measurements and subjected to a wave-by-wave analysis. The results allow the conclusion that the buoy with a medium size disk constitutes the best compromise. In fact, it permits the buoy to follow the free surface while minimizing parasitic motions. 相似文献
2.
The impact of accelerometry on CHAMP orbit determination 总被引：6，自引：0，他引：6
The contribution of the STAR accelerometer to the CHAMP orbit precision is evaluated and quantified by means of the following
results: orbital fit to the satellite laser ranging (SLR) observations, GPS reduced-dynamic vs SLR dynamic orbit comparisons,
and comparison of the measured to the modeled non-gravitational accelerations (atmospheric drag in particular). In each of
the four test periods in 2001, five CHAMP arcs of 2 days' length were analyzed. The mean RMS-of-fit of the SLR observations
of the orbits computed with STAR data or the non-gravitational force model were 11 and 24 cm, respectively. If the accelerometer
calibration parameters are not known at least at the few percent level, the SLR orbit fit deteriorates. This was tested by
applying a 10% error to the along-track scale factor of the accelerometer, which increased the SLR RMS-of-fit on average to
17 cm. Reference orbits were computed employing the reduced-dynamic technique with GPS tracking data. This technique yields
the most accurate orbit positions thanks to the estimation of a large number of empirical accelerations, which compensate
for dynamic modeling errors. Comparison of the SLR orbits, computed with STAR data or the non-gravitational force model, to
the GPS-based orbits showed that the SLR orbits employing accelerometer observations are twice as accurate. Finally, comparison
of measured to modeled accelerations showed that the level of geomagnetic activity is highly correlated with the atmospheric
drag model error, and that the largest errors occur around the geomagnetic poles.
Received: 7 May 2002 / Accepted: 18 November 2002
Correspondence to: S. Bruinsma
Acknowledgments. The TIGCM results were obtained from the CEDAR database. This study was supported by the Centre National d'Etudes Spatiales
(CNES). The referees are thanked for their helpful remarks and suggestions. 相似文献
3.
The satellite CHAMP carries the accelerometer STAR in its payload and thanks to the GPS and SLR tracking systems accurate orbit positions can be computed. Total atmospheric density values can be retrieved from the STAR measurements, with an absolute uncertainty of 10-15%, under the condition that an accurate radiative force model, satellite macro-model, and STAR instrumental calibration parameters are applied, and that the upper-atmosphere winds are less than . The STAR calibration parameters (i.e. a bias and a scale factor) of the tangential acceleration were accurately determined using an iterative method, which required the estimation of the gravity field coefficients in several iterations, the first result of which was the EIGEN-1S (Geophys. Res. Lett. 29 (14) (2002) 10.1029) gravity field solution. The procedure to derive atmospheric density values is as follows: (1) a reduced-dynamic CHAMP orbit is computed, the positions of which are used as pseudo-observations, for reference purposes; (2) a dynamic CHAMP orbit is fitted to the pseudo-observations using calibrated STAR measurements, which are saved in a data file containing all necessary information to derive density values; (3) the data file is used to compute density values at each orbit integration step, for which accurate terrestrial coordinates are available. This procedure was applied to 415 days of data over a total period of 21 months, yielding 1.2 million useful observations. The model predictions of DTM-2000 (EGS XXV General Assembly, Nice, France), DTM-94 (J. Geod. 72 (1998) 161) and MSIS-86 (J. Geophys. Res. 92 (1987) 4649) were evaluated by analysing the density ratios (i.e. “observed” to “computed” ratio) globally, and as functions of solar activity, geographical position and season. The global mean of the density ratios showed that the models underestimate density by 10-20%, with an rms of 16-20%. The binning as a function of local time revealed that the diurnal and semi-diurnal components are too strong in the DTM models, while all three models model the latitudinal gradient inaccurately. Using DTM-2000 as a priori, certain model coefficients were re-estimated using the STAR-derived densities, yielding the DTM-STAR test model. The mean and rms of the global density ratios of this preliminary model are 1.00 and 15%, respectively, while the tidal and latitudinal modelling errors become small. This test model is only representative of high solar activity conditions, while the seasonal effect is probably not estimated accurately due to correlation with the solar activity effect. At least one more year of data is required to separate the seasonal effect from the solar activity effect, and data taken under low solar activity conditions must also be assimilated to construct a model representative under all circumstances. 相似文献
4.
Martín Crdenas-Soto Francisco J. Chvez-García 《Soil Dynamics and Earthquake Engineering》2007,27(5):475-486
We analysed in detail three earthquakes recorded in a small-aperture accelerometric array in Mexico City, using the correlation of the records as a function of time along the accelerogram and frequency. Ground response is strongly conditioned by the fundamental period of the soft soils at the site of the array (T0). Energy at periods longer than 2T0 is guided by the crustal structure (with a thickness of 45 km). The wave field at periods between T0 and 2T0 also consists of surface waves but guided by the upper 2–3 km of volcanic sediments in central Mexico. For periods smaller than T0, ground motion is uncorrelated among the stations. Our results indicate that seismic response of Mexico City, including its very long duration, results from deeply guided surface waves (between 2 and 45 km depth) interacting with the very local response of the soft surficial clay layer. 相似文献
5.
6.
GOCE gradiometer: estimation of biases and scale factors of all six individual accelerometers by precise orbit determination 总被引：3，自引：0，他引：3
P. N. A. M. Visser 《Journal of Geodesy》2009,83(1):69-85
A method has been implemented and tested for estimating bias and scale factor parameters for all six individual accelerometers
that will fly on-board of GOCE and together form the so-called gradiometer. The method is based on inclusion of the individual
accelerometer observations in precise orbit determinations, opposed to the baseline method where so-called common-mode accelerometer
observations are used. The method was tested using simulated data from a detailed GOCE system simulator. It was found that
the observations taken by individual accelerometers need to be corrected for (1) local satellite gravity gradient (SGG), and
(2) rotational terms caused by centrifugal and angular accelerations, due to the fact that they are not located in the satellite’s
center of mass. For these corrections, use is made of a reference gravity field model. In addition, the rotational terms are
derived from on-board star tracker observations. With a perfect a priori gravity field model and with the estimation of not
only accelerometer biases but also accelerometer drifts, scale factors can be determined with an accuracy and stability better
than 0.01 for two of the three axes of each accelerometer, the exception being the axis pointing along the long axis of the
satellite (more or less coinciding with the flight direction) for which the scale factor estimates are unreliable. This axis
coincides with the axis of drag-free control, which results in a small variance of the signal to be calibrated and thus an
inaccurate determination of its scale factor in the presence of relatively large (colored) accelerometer observation errors.
In the presence of gravity field model errors, it was found that still an accuracy and stability of about 0.015 can be obtained
for the accelerometer scale factors by simultaneously estimating empirical accelerations. 相似文献
7.
8.
This paper focuses on using high-frequency GAP-SENSORs (GSs), accelerometers, and load cells in a laminar shear box (LSB) filled with loose Toyoura sand to understand the effects of impact loads and cyclic shaking at 1-G on soil properties. The shear wave velocity at small strain (Vs) was calculated directly from first arrival reference using displacement time-history of two GSs under impact loading. Moreover, from first peak using the reduced deformation amplitude technique, damping ratio was calculated. In addition, shaking table tests were performed under harmonic loading with amplitude of acceleration inside the model ground varying from 0.02 g to 1 g. The frequencies of excitation varied from 1 Hz to 10 Hz. GSs and inside accelerometers were used to directly measure the outside lateral deformation and shear stress at different elevations of LSB, respectively. Results show that the shear modulus (G) and the damping ratio (D) behavior of model sand are generally consistent with the behavior presented by similar tests using only accelerometers. In addition, damping ratio increases as frequency loading increases. Characteristic changes in two shear stress components in shaking loading conditions were also investigated using high precision inside load cells. 相似文献
9.
本文主要研究了利用GRACE星载加速度计数据反演热层密度.首先联合采用GRACE卫星2007—2009年星载加速度计数据和星载GPS数据进行动力学定轨并同时估计加速度计校正参数,依此对加速度计数据进行了校正.根据Sentman稀薄空气动力学方程计算卫星空气动力系数,对校正后的加速度计数据进行处理,反演得到了该时期沿轨热层大气密度.为分析反演密度的精度,将本文反演得到的GRACE-A卫星沿轨密度与Doornbos的解算结果,以及经验密度模型NRLMSISE00,HASDM模型进行比较分析.统计结果表明,本文反演结果比Doornbos系统性偏大约5%~8%,二者间的标准差(STD,standard deviation)在10%以内,具有较好的符合性.其差异主要是由于采用了不同的加速度标校以及空气动力系数计算策略.本文反演得到的热层密度较HASDM模型表现为正的系统性偏差且幅度在4%以内,而Doornbos的结果较HASDM模型约系统性偏小4%~7%,二者与HASDM模型的标准差均为30%左右.另外,本文反演密度与NRLMSISE00模型之间存在约30%~40%的系统性bias,其STD也在30%左右. 相似文献
10.
Alessio Aboudan Giacomo Colombatti Francesca Ferri Francesco Angrilli 《Planetary and Space Science》2008,56(5):573-585
Space probes entering planetary atmospheres are used for in situ study of their physical structures. During the entry phase aerodynamic forces exerted on the probe depend on atmospheric density. As a consequence accelerations measured by on-board sensors can be used to derive probe trajectory as well as atmospheric density, pressure and temperature profiles. In this work acceleration data acquired by the Huygens Atmospheric Structure Instrument (HASI) have been used to reconstruct the probe trajectory and the Titan's atmospheric structure from down to of altitude. An accurate six degree of freedom model of Huygens during the entry phase has been developed and a new reconstruction technique based on Kalman filtering is presented. This technique estimates simultaneously the probe trajectory, the attitude profile consistent with measured data and the atmospheric density, pressure and temperature. 相似文献