Fracture characteristics in Cretaceous platform and overlying ramp carbonates: An outcrop study from Maiella Mountain (central Italy)     

《Marine and Petroleum Geology》2016

This article focuses on field- and laboratory-based characterization of vertically persistent fractures that are part of oblique-slip normal fault zones and crosscut the Cretaceous platform and overlaying ramp carbonates outcropping at Maiella Mountain (central Italy). The achieved results show that: (i) fault damage zones are wider and more densely fractured in the platform carbonates than in the ramp ones; (ii) joints and sheared joints composing the fault damage zones are taller, better connected and less spaced within the former rocks than in the ramp carbonates. The aforementioned structural differences are interpreted to be a consequence of the different mechanical properties of the platform and ramp carbonates during failure. At Maiella Mountain, platform carbonates are, indeed, made up of overall stiffer (higher Uniaxial Compressive Strength values) and less porous rocks, due to more abundant intergranular void-filling cement and presence of matrix.In terms of hydrocarbon flow and recovery, geometric and dimensional attributes of fractures suggest that the well-connected network of closely spaced fractures cutting across the platform carbonates may form efficient pathways for both vertical and horizontal hydrocarbon flow. In contrast, the relatively poorly connected and low-density fracture network affecting the ramp carbonates is likely less efficient in providing fairways for flowing hydrocarbons.  相似文献   

温杖子金矿成因类型与成矿模式     

杨振德  张秀棋 《地质与资源》1995,4(2):118-123

温杖子金矿的形成经历了长期的成矿作用和多次矿化富集,具叠加成因特点,主要成因类型为侵入体接触带型和中低温热液型。成矿作用从晚侏罗世开始,一直持续到第三纪末,约延续了150Ma。  相似文献   

MIDAS-W: a workstation-based incoherent scatter radar data acquisition system     

J. M. Holt  P. J. Erickson  A. M. Gorczyca  T. Grydeland 《Annales Geophysicae》2000,18(9):1231-1241

The Millstone Hill Incoherent Scatter Data Acquisition System (MIDAS) is based on an abstract model of an incoherent scatter radar. This model is implemented in a hierarchical software system, which serves to isolate hardware and low-level software implementation details from higher levels of the system. Inherent in this is the idea that implementation details can easily be changed in response to technological advances. MIDAS is an evolutionary system, and the MIDAS hardware has, in fact, evolved while the basic software model has remained unchanged. From the earliest days of MIDAS, it was realized that some functions implemented in specialized hardware might eventually be implemented by software in a general-purpose computer. MIDAS-W is the realization of this concept. The core component of MIDAS-W is a Sun Microsystems UltraSparc 10 workstation equipped with an Ultrarad 1280 PCI bus analog to digital (A/D) converter board. In the current implementation, a 2.25 MHz intermediate frequency (IF) is bandpass sampled at 1 s intervals and these samples are multicast over a high-speed Ethernet which serves as a raw data bus. A second workstation receives the samples, converts them to filtered, decimated, complex baseband samples and computes the lag-profile matrix of the decimated samples. Overall performance is approximately ten times better than the previous MIDAS system, which utilizes a custom digital filtering module and array processor based correlator. A major advantage of MIDAS-W is its flexibility. A portable, single-workstation data acquisition system can be implemented by moving the software receiver and correlator programs to the workstation with the A/D converter. When the data samples are multicast, additional data processing systems, for example for raw data recording, can be implemented simply by adding another workstation with suitable software to the high-speed network. Testing of new data processing software is also greatly simplified, because a workstation with the new software can be added to the network without impacting the production system. MIDAS-W has been operated in parallel with the existing MIDAS-1 system to verify that incoherent scatter measurements by the two systems agree. MIDAS-W has also been used in a high-bandwidth mode to collect data on the November, 1999, Leonid meteor shower.  相似文献   

High precision locations of LP events on Mt. Etna: Reconstruction of the fluid-filled volume     

S. Gambino 《Studia Geophysica et Geodaetica》2006,50(4):663-674

During 1991–93 at Mount Etna, long-period (LP) events occurring in swarms characterized the evolution of the eruption. The presence of multiplets i.e. groups of events with similar waveform signatures, has been recognized within this activity. Traditional techniques for locating LP events do not allow obtaining reliable hypocenters, which have only succeeded in placing earthquakes in a roughly 1 km² area slightly east of the Mt. Etna Northeast Crater. Hypocenters have been relocated in two steps: the absolute location has been improved using Thurber’s code and a complex 3D velocity model; a highly precise relative location has been applied on multiplets to define the source geometry. 3D locations and high precision analysis suggest that during the 1991–93 eruption the resonator producing LP events was a part of the uppermost Northeast Crater conduit, measuring 210 meters in height and 45–50 meters in diameter.  相似文献   

A new calibration model for pointing a radio telescope that considers nonlinear errors in the azimuth axis ＊     

De-Qing Kong  Song-Gen Wang  Jin-Qing Wang  Min Wang  Hong-Bo Zhang 《中国天文和天体物理学报》2014,(6):733-740

A new calibration model of a radio telescope that includes pointing error is presented, which considers nonlinear errors in the azimuth axis. For a large radio telescope, in particular for a telescope with a turntable, it is difficult to correct pointing errors using a traditional linear calibration model, because errors produced by the wheel-on-rail or center bearing structures are generally nonlinear. Fourier expansion is made for the oblique error and parameters describing the inclination direction along the azimuth axis based on the linear calibration model, and a new calibration model for pointing is derived. The new pointing model is applied to the 40 m radio telescope administered by Yunnan Observatories, which is a telescope that uses a turntable. The results show that this model can significantly reduce the residual systematic errors due to nonlinearity in the azimuth axis compared with the linear model.  相似文献   

Sedimentary cycle pattern and stacked style of sand-body of the Lower Jurassic Sangonghe Formation in belly of Junggar Basin          下载免费PDF全文

Xu Shu-Mei  Li Meng  Wang Jin-Duo  Ren Xin-Cheng  Chi Xin-Qi  Shu Peng-Cheng  Wang Jie-Qing  Liu Xian 《古地理学报》1999,22(2):221-234

The coarse grain braided river delta in Jurassic Sangonghe Formation of Junggar Basin formed the main Mesozoic reservoir system. At present,there are obvious different opinions on the sedimentary cycle characteristics of Jurassic Sangonghe Formation,and there is a lack of research on the driving mechanisms of sedimentary cyclicity,which leads to a great dispute on the stacked style of sand-bodies. Using 38 wells coring and logging data in the belly of Junggar Basin,based on principles and methods of sedimentology and sedimentary basin analysis,the characteristics of sedimentary cycle in Sangonghe Formation are systematically analyzed. The stacked style and combination rule of sand-bodies are studied in detail within sedimentary cyclic framework. The characteristics of basement subsidence and multi-stage uplifting during the Early Jurassic of Junggar Basin are discussed,so as to clear the driving mechanisms of positive sedimentary cycle. The Sangonghe Formation in the study area is divided into four system tract level positive cycles with no reverse cycle deposition,which reflects the sedimentary characteristics of slow lacustrine transgress and fast lacustrine retrogress. The sand-bodies in the braided river delta front of the Sangonghe Formation show five stacking patterns: Strong erosion of superimposed sand-body by subaqueous distributary channel,weak erosion of superimposed sand-body by subaqueous distributary channel,superimposed river-mouth bar on subaqueous distributary channel,distal bar-blanket sand assemblage,beach bar sand-body. The first cycle is the intermittent distribution of beach bar sand-bodies. The second cycle includes continuous distribution of strong erosion of superimposed sand-body by subaqueous distributary channel,weak erosion of superimposed sand-body by subaqueous distributary channel,and superimposed river-mouth bar on subaqueous distributary channel. The third cycle is composed of relatively continuous distribution of weak erosion of superimposed sand-body by subaqueous distributary channel and distal bar-blanket sand assemblage. The fourth cycle is scattered distribution of beach bar sand-body. It is possible because of the slow subsidence and intermittent rapid uplift of the basement of Junggar Basin that regressive superposition and the scour interface between each sedimentary cycle are formed.  相似文献   

Improvement of user’s accuracy through classification of principal component images and stacked temporal images     

Nilanchal Patel  Brijesh Kumar Kaushal 《地球空间信息科学学报》2010,13(4):243-248

The classification accuracy of the various categories on the classified remotely sensed images are usually evaluated by two different measures of accuracy, namely, producer’s accuracy (PA) and user’s accuracy (UA). The PA of a category indicates to what extent the reference pixels of the category are correctly classified, whereas the UA of a category represents to what extent the other categories are less misclassified into the category in question. Therefore, the UA of the various categories determines the reliability of their interpretation on the classified image and is more important to the analyst than the PA. The present investigation has been performed in order to determine if there occurs improvement in the UA of the various categories on the classified image of the principal components of the original bands and on the classified image of the stacked image of two different years. We performed the analyses using the IRS LISS III images of two different years, i.e., 1996 and 2009, that represent the different magnitude of urbanization and the stacked image of these two years pertaining to Ranchi area, Jharkhand, India, with a view to assessing the impacts of urbanization on the UA of the different categories. The results of the investigation demonstrated that there occurs significant improvement in the UA of the impervious categories in the classified image of the stacked image, which is attributable to the aggregation of the spectral information from twice the number of bands from two different years. On the other hand, the classified image of the principal components did not show any improvement in the UA as compared to the original images.  相似文献   

裸眼系列完井方式下叠式分支水平井产能预测     

陈阳  熊友明  陈宗毅  王彬  张林  刘理明 《地质科技情报》2012,31(3):73-76

综合运用保角变换、镜像反映愿理,势的叠加原理以及等值渗流阻力等数学和渗流力学分析方法,推导出裸眼系列完井方式下叠武分支水平井的产能解析公式,当分支数目为1时,所推导的解析公式退化为著名的Borisov公式.分析了影响其产能的几个重要因素,从而为该类型分支井的完井方案设计提供参考依据.经研究发现,完井筛管挡砂精度越高,相比水平井,叠式分支水平井产能损失相对越少;叠武分支水平井的产能受其在上下封闭边界油藏中垂向位置的影响较小;相比微元段模型,解析模型预测的产能偏高,引入校正系数后可减小偏差.  相似文献   

Conceptual design studies of the 5 m terahertz antenna for Dome A,Antarctica   总被引：1，自引：0，他引：1  

Ji Yang  Ying-Xi Zuo  Zheng LOU  Jing-Quan Cheng  Qi-Zhou Zhang  Sheng-Cai Shi  Jia-Sheng Huang  Qi-Jun Yao  Zhong Wang 《天体物理学报》2013,(12):1493-1508

As the highest, coldest and driest place in Antarctica, Dome A provides exceptionally good observing conditions for ground-based observations over terahertz wavebands. The 5 m Dome A Terahertz Explorer （DATES） has been proposed to explore new terahertz windows, primarily over wavelengths between 350 and 200 pm. DATE5 will be an open-air, fully-steerable telescope that can function by unmanned operation with remote control. The telescope will be able to endure the harsh polar environment, including high altitude, very low temperature and very low air pressure. The unique specifications, including high accuracies for surface shape and pointing and fully automatic year-around remote operation, along with a stringent limit on the periods of on-site assembly, testing and maintenance, bring a number of challenges to the design, construction, assembly and operation of this telescope. This paper intro- duces general concepts related to the design of the DATE5 antenna. Beginning from an overview of the environmental and operational limitations, the design specifications and requirements of the DATE5 antenna are listed. From these, major aspects on the conceptual design studies, including the antenna optics, the backup structure, the pan- els, the subreflector, the mounting and the antenna base structure, are explained. Some critical issues of performance are justified through analyses that use computational fluid dynamics, thermal analysis and de-icing studies, and the proposed approaches for test operation and on-site assembly. Based on these studies, we conclude that the specifications of the DATE5 antenna can generally be met by using enhanced technological approaches.  相似文献   

复频探地雷达在未爆弹探测中的应用     

方涛  张建军  付成群 《大地测量与地球动力学》2016,36(3):244-247

使用搭载200&400 MHz复合天线的LTD系列探地雷达,对埋设的未爆弹进行探测试验,并运用克希霍夫积分偏移法及三维插值算法对探地雷达数据进行三维成像。试验结果能准确地反映出浅埋未爆弹的位置信息,可指导排爆人员进行精确的开挖及排除。  相似文献