A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献   

Parallelization of the flow-path network model using a particle-set strategy     

Fangli Zhang 《International journal of geographical information science》2019,33(10):1984-2010

High-performance simulation of flow dynamics remains a major challenge in the use of physical-based, fully distributed hydrologic models. Parallel computing has been widely used to overcome efficiency limitation by partitioning a basin into sub-basins and executing calculations among multiple processors. However, existing partition-based parallelization strategies are still hampered by the dependency between inter-connected sub-basins. This study proposed a particle-set strategy to parallelize the flow-path network (FPN) model for achieving higher performance in the simulation of flow dynamics. The FPN model replaced the hydrological calculations on sub-basins with the movements of water packages along the upstream and downstream flow paths. Unlike previous partition-based task decomposition approaches, the proposed particle-set strategy decomposes the computational workload by randomly allocating runoff particles to concurrent computing processors. Simulation experiments of the flow routing process were undertaken to validate the developed particle-set FPN model. The outcomes of hourly outlet discharges were compared with field gauged records, and up to 128 computing processors were tested to explore its speedup capability in parallel computing. The experimental results showed that the proposed framework can achieve similar prediction accuracy and parallel efficiency to that of the Triangulated Irregular Network (TIN)-based Real-Time Integrated Basin Simulator (tRIBS).  相似文献   

A machine learning approach for predicting computational intensity and domain decomposition in parallel geoprocessing     

Peng Yue  Fan Gao  Boyi Shangguan  Zheren Yan 《International journal of geographical information science》2020,34(11):2243-2274

ABSTRACT

High performance computing is required for fast geoprocessing of geospatial big data. Using spatial domains to represent computational intensity (CIT) and domain decomposition for parallelism are prominent strategies when designing parallel geoprocessing applications. Traditional domain decomposition is limited in evaluating the computational intensity, which often results in load imbalance and poor parallel performance. From the data science perspective, machine learning from Artificial Intelligence (AI) shows promise for better CIT evaluation. This paper proposes a machine learning approach for predicting computational intensity, followed by an optimized domain decomposition, which divides the spatial domain into balanced subdivisions based on the predicted CIT to achieve better parallel performance. The approach provides a reference framework on how various machine learning methods including feature selection and model training can be used in predicting computational intensity and optimizing parallel geoprocessing against different cases. Some comparative experiments between the approach and traditional methods were performed using the two cases, DEM generation from point clouds and spatial intersection on vector data. The results not only demonstrate the advantage of the approach, but also provide hints on how traditional GIS computation can be improved by the AI machine learning.  相似文献   

沂水崔家峪玻璃用石英砂岩矿地质特征          下载免费PDF全文

李祥忠  程晓萍  杨学生  解庆岭 《山东国土资源》2004,20(2):34-40

沂水崔家峪玻璃用石英砂岩矿床赋存于早寒武世李官组砂岩段中．呈近水平的层状产出。因其岩石坚硬．矿体呈环山的平台状分布。矿体厚度大，矿石品级高，特级品矿石二氧化硅平均含量98．47％，铁杂质平均含量0．043％(选矿后，铁杂质含量可降至0．02％以下)，为一优质玻璃硅质原料矿床。矿石为细一中粒石英砂岩，粒度以中粒为主，矿石由碎屑颗粒和胶结物组成，碎屑成分含量为97％～98％．其中绝大部分是石英颗粒．具典型的砂屑结掏。该矿床属滨海陆源沉积矿床。  相似文献   

Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry     

Jacques Desrues  Gioacchino Viggiani 《国际地质力学数值与分析法杂志》2004,28(4):279-321

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd  相似文献   

Chemical alteration of tephra in the depositional environment: theoretical stability modelling     

A. M. Pollard  S. P. E. Blockley  K. R. Ward 《第四纪科学杂志》2003,18(5):385-394

The study of the chemical stability of vitreous material in aqueous media is well‐established. There has to date been little consideration of the implications of variations in the chemical durability of tephra in Quaternary tephrochronology. Chemical alteration can take the form of cationic leaching from the matrix, or complete destruction of the silica network, either of which could constrain the ability to chemically identify distal tephra. Here we apply established models of vitreous durability to the published chemical analyses of a large number of Icelandic tephras in order to predict their relative durabilities under equivalent conditions. This suggests that some important tephras have relatively poor chemical stability, and that rhyolitic tephras are, in general, more stable than basaltic. We conclude that tephras should be expected to show predictable differential chemical stability in the post‐depositional environment. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

三峡重庆库区深部地球物理特征与断裂构造   总被引：1，自引：0，他引：1  

胡建平  赵军龙  汪文秉  李娜 《地球科学与环境学报》2005,27(3):49-54

为了深入研究三峡重庆库区岩石圈动力学特征及其对断裂构造活动的控制和影响．并为之提供基础资料，为三峡重庆库区地震、地质灾害的监测与防治提供基础依据，在已有地球物理资料的基础上，从综合地球物理研究角度出发，通过实测地震测线资料的再解释．采用新的处理技术方法，对本区的东西向主剖面和南北向支测线的地震测深资料进行二维射线追踪处理、Pg波成像；选用场分离技术、位移数字成像技术重新处理了重力和航磁资料，通过联合反演来建立深部二维构造剖面，对剖面所揭示的基底构造特征和地壳结构特征、主要断裂构造特征以及莫霍面的起伏特征进行了精细分析和细致研究．从地球物理平面场特征出发建立了岩石圈构造三维框架。研究结果表明，这样的研究思路准确、方法得当．结论可靠；沿该剖面，把可解译的断裂分为Ⅲ级：Ⅰ级为超岩石圈断裂；Ⅱ级为壳断裂；Ⅲ级为盖层断裂。依据地球物理特征，准确揭示了库区的断裂构造特征，达到了预期效果。  相似文献   

A focal plane detector design for a wide-band Laue-lens telescope     

Ezio Caroli  Natalia Auricchio  Lorenzo Amati  Yuriy Bezsmolnyy  Carl Budtz-JøRgensen  Rui M. Curado da Silva  Filippo Frontera  Alessandro Pisa  Stefano Del Sordo  John B. Stephen  Giulio Ventura 《Experimental Astronomy》2005,20(1-3):341-351

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.  相似文献   

武汉区域气象中心数值预报业务并行计算机系统     

龚贤创  范宏飞  余康庆  王宏记 《成都信息工程学院学报》2002,17(4):236-239

对武汉区域气象中心并行计算机系统进行了详细地介绍，分析了并行计算机体系结构、网络和存储系统特点；给出了在并行计算机SP上实现数值预报业务并行化的部分结果；对数值预报模式在串、并行编程环境下的结果进行了分析比较。  相似文献   

Mechanical models of fracture reactivation and slip on bedding surfaces during folding of the asymmetric anticline at Sheep Mountain, Wyoming     

Pablo F. Sanz  David D. Pollard  Patricia F. Allwardt  Ronaldo I. Borja 《Journal of Structural Geology》2008,30(9):1177-1191

  相似文献