Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献   

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials          下载免费PDF全文

Cássio B. Aguiar  Samir Maghous 《国际地质力学数值与分析法杂志》2018,42(16):2018-2046

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.  相似文献   

RECENT TECTONIC DEFORMATION ANOMALY AND EARTHQUAKES IN GANSU-NINGXIA-QINGHAI AREA     

Wang Shuangxu  Zhang Xi  Zhang Sixin  Xue Fuping 《大地测量与地球动力学》2003,23(Z1)

1　IntroductionAccordingtogeologicalstructure ,theGansu Ningxia Qinghaiareabelongstothenortheastmar ginofQinghai Tibetblock .Thisareahasbeenpaidmuchattentionby geo specialistsinChinaandabroadbecauseofitssignificanttectonicmovement,itsintensiveseismicity ,anditsimportanceinearth quakehazardmitigation .IntheDevelopmentPro gramonNationalKeyBasicResearchesundertheProject“MechanismandPredictionofContinentalStrongEarthquakes”,themechanismsofcontinen talstrongearthquakesarestudied ,usinghypo…  相似文献   

Influence of the Choice of Core-Envelope Transition Point on the Binary Merger of Two Main-sequence Components     

Xue-Fei Chen  Zhan-Wen HanNational Astronomical Observatories  Yunnan Observatory  Chinese Academy of Sciences. Kunming  Graduate School of the Chinese Academy of Sciences  Beijing 《中国天文和天体物理学报》2005,5(1):65-76

We have studied the influence of different choices of core-envelope transition point on the final merger of contact binaries with two main-sequence components. A binary of 1.00 + 0.90M⊙ with an initial orbital period of 0.35d is examined. The mass fraction of the primary mixed with the matter of the secondary, qmix, determined by the chosen core-envelope transition point, ranges from 0.04 to 1.00 in our analysis. If as qmix< 0.8, none of the  相似文献   

Dynamical-friction galaxy–gas coupling and cluster cooling flows     

Amr A. El-Zant  Woong-Tae Kim  Marc Kamionkowski 《Monthly notices of the Royal Astronomical Society》2004,354(1):169-175

  相似文献   

Age and early metamorphic history of the Sanbagawa belt: Lu–Hf and P–T constraints from the Western Iratsu eclogite     

S. ENDO  S.WALLIS  T. HIRATA  R. ANCZKIEWICZ  J. PLATT  M. THIRLWALL  Y. ASAHARA 《Journal of Metamorphic Geology》2009,27(5):371-384

Two distinct age estimates for eclogite-facies metamorphism in the Sanbagawa belt have been proposed: (i) c.  120–110 Ma based on a zircon SHRIMP age for the Western Iratsu unit and (ii) c.  88–89 Ma based on a garnet–omphacite Lu–Hf isochron age from the Seba and Kotsu eclogite units. Despite the contrasting estimates of formation ages, petrological studies suggest the formation conditions of the Western Iratsu unit are indistinguishable from those of the other two units—all ∼20 kbar and 600–650 °C. Studies of the associated geological structures suggest the Seba and Western Iratsu units are parts of a larger semi-continuous eclogite unit. A combination of geochronological and petrological studies for the Western Iratsu eclogite offers a resolution to this discrepancy in age estimates. New Lu–Hf dating for the Western Iratsu eclogite yields an age of 115.9 ± 0.5 Ma that is compatible with the zircon SHRIMP age. However, petrological studies show that there was significant garnet growth in the Western Iratsu eclogite before eclogite facies metamorphism, and the early core growth is associated with a strong concentration of Lu. Pre-eclogite facies garnet (Grt1) includes epidote–amphibolite facies parageneses equilibrated at 550–650 °C and ∼10 kbar, and this is overgrown by prograde eclogite facies garnet (Grt2). The Lu–Hf age of c.  116 Ma is strongly skewed to the isotopic composition of Grt1 and is interpreted to reflect the age of the pre-eclogite phase. The considerable time gap ( c.  27 Myr) between the two Lu–Hf ages suggests they may be related to separate tectonic events or distinct phases in the evolution of the Sanbagawa subduction zone.  相似文献   

Population synthesis for symbiotic stars with white dwarf accretors     

Guoliang Lü  L. Yungelson  Z. Han 《Monthly notices of the Royal Astronomical Society》2006,372(3):1389-1406

  相似文献   

Disk galaxy evolution: from the Milky Way to high-redshift disks     

Nikos Prantzos 《Astrophysics and Space Science》2003,284(2):675-684

We develop a detailed model of the Milky Way (a `prototypical' disk galaxy) and extend it to other disks with the help of some simple scaling relations, obtained in the framework of Cold Dark Matter models. This phenomenological (`hybrid') approach to the study of disk galaxy evolution allows us to reproduce successfully a large number of observed properties of disk galaxies in the local Universe and up to redshift z ∼ 1. The important conclusion is that, on average, massive disks have formed the bulk of their stars earlier than their lower mass counterparts: the `star formation hierarchy' has been apparently opposite to the `dark matter assembly' hierarchy. It is not yet clear whether `feedback' (as used in semi-analytical models of galaxy evolution) can explain that discrepancy. This revised version was published online in August 2006 with corrections to the Cover Date.  相似文献   

Oxygen, carbon and nitrogen evolution in galaxies     

Cristina Chiappini  Donatella Romano  Francesca Matteucci 《Monthly notices of the Royal Astronomical Society》2003,339(1):63-81

  相似文献