脐带缆螺旋滑移分析及力学性能研究   总被引：1，自引：0，他引：1  

李英  吴潘  冯雅萍  曹静萱 《海洋工程》2018,36(6):58-68

针对脐带缆内部螺旋层,应用Darboux标架建立螺旋结构空间坐标系,推导弯曲载荷下螺旋结构的局部变形和滑移。考虑螺旋构件间的接触和摩擦作用,建立螺旋结构的受力平衡偏微分方程,并研究螺旋角和摩擦系数对螺旋结构滑移的影响。基于同层螺旋结构本构关系相同假设,将所有螺旋结构力学性能线性叠加,拟合脐带缆整体弯曲刚度。运用建立的理论解析方法,对某双层铠装脐带缆的力学性能进行研究,并与数值模拟结果进行对比验证。对比结果表明,理论解析得到的螺旋滑移结果与数值模拟结果一致,理论解析得到的脐带缆弯曲刚度与数值模拟结果在全滑动阶段比较接近。  相似文献   

Evolutionary Processes in Low-Mass Binary Systems     

Peter P. Eggleton  Ludmila Kisseleva-Eggleton 《Astrophysics and Space Science》2005,296(1-4):327-336

We consider the evolution of certain low-mass binaries, incorporating models of (a) internal evolution, (b) tidal friction, (c) dynamo activity driven by an elementary α,Ω dynamo, (d) stellar wind driven by the activity, and (e) magnetic braking as a consequence of wind and poloidal dynamo-generated magnetic field. In some circumstances the stellar wind is found to remove mass on a nuclear timescale, as is necessary to explain some observed systems. We can hope that various uncertainties in the model may be clarified by a careful comparison of the models with such observed quantities as rotation periods. These are modified by processes (a), (b) and (e). Assuming that stellar evolution is slow, rotation rate should in some circumstances represent a balance between magnetic braking trying to slow the star down and tidal friction trying to spin it up. Preliminary attempts are promising, but indicate that some fine tuning is necessary. When there is a third body present, in an orbit which is inclined but not necessarily of short period, the eccentricity of a close binary can be strongly modified by ‘Kozai cycles’. We show that this may complicate attempts to account for spin rates of stars in close binaries.  相似文献   

A deep geoelectric survey of the Carnmenellis granite     

D. Beamish 《Geophysical Journal International》1990,102(3):679-693

  相似文献   

阿吾拉勒山西段二叠纪火山岩组合与构造环境分析     

姜常义  吴文奎  谢广成  李伍平 《地球科学与环境学报》1992,(4)

阿吾拉勒山体西段发育了厚度巨大的下二叠统火山岩,这些火山岩均属碱性玄武岩系列,以钾质类型为主,钠质类型次之,岩浆演化呈现出跨越B型趋势。这种火山活动是在大陆地壳内部产生的,代表了陆内裂谷演化的早期阶段。在早二叠世末期,由于受到新源运动的影响,这种火山活动被终止了。  相似文献   

西安地区单桩桩土相互作用数值模拟分析   总被引：1，自引：0，他引：1  

魏静  王建华  李永林 《地球科学与环境学报》2003,25(3):63-66

随着计算机技术和数值方法的不断发展和完善,使有限元法得到越来越多的应用。根据西安地区原型摩擦桩的地层特点和土性条件,运用有限元基础理论,利用相应的边界条件与假设条件,建立单桩数学模型。通过模型研究了单桩的沉降特性与土共同作用的影响因素,对西安地区单桩桩土相互作用机理进行了探讨。  相似文献   

金州地区震旦系基本层序与沉积环境     

张国仁 《国土资源》1993,(3)

金州地区广泛发育震旦纪地层,具分布连续、出露完整、沉积相标志明显的特点。本文运用现代沉积学和地层学理论,对区内震旦系岩石地层进行了基本层序研究与沉积环境分析。  相似文献   

山东省侵入岩岩石单位及其代号的厘定   总被引：1，自引：0，他引：1       下载免费PDF全文

王世进  张成基  宋明春  王沛成 《山东国土资源》2002,18(1):9-20

根据《1∶2 5万区域地质调查技术要求 (暂行 )》和我省正在进行的 1∶2 5万区调修测取得的阶段性成果 ,对山东省侵入岩岩石单位及其代号进行了厘定 :不同类型的花岗岩类均作为正式填图单位按“年代 岩性和典型产地方法”确定填图单位代号 ,而独立侵入体、脉岩和包体 ,以及基性—超基性岩则作为非正式填图单位按“年代 岩性方法”确定填图单位代号。  相似文献   

Electromagnetic signals associated with stick–slip of quartz-free rocks     

Akito Tsutsumi  Nobumasa Shirai 《Tectonophysics》2008,450(1-4):79-84

We recorded clear transients in the electric and magnetic fields upon sudden slip in stick–slip experiments on dry, cylindrically shaped, quartz-free rock specimens of basalt and peridotite with a 30° saw-cut (representing a fault) at confining pressures of up to 120 MPa. The amplitudes of the measured electric field signals were always higher at the electrode pair oriented parallel to the strike of the fault than at the pair oriented perpendicular. This anisotropy suggests a preferred electric polarization normal to the slip surface. The transients in the electric and magnetic fields were observed only when the fault slip occurred by stick–slip mode, not by a stable mode of the sliding, and the amplitudes of the electric field signals increased with increasing stress drop. It is suggested that the generation process of the electromagnetic signals is closely related to the characteristic behavior of the fault at the time of the initiation of slip during stick–slip events, probably with respect to the intensity of the signals. We propose that one or both of the following two processes characteristic of the fault at the time of the initiation of slip during stick–slip events are essential for the generation of detectable electromagnetic signals: rapid slip along the simulated fault and separation of the rock masses across the fault.  相似文献   

Gouging abrasion test for rock abrasiveness testing     

V.A. Golovanevskiy  R.A. Bearman 《International Journal of Mineral Processing》2008

Wear parts of many mineral processing and mining equipment are often subjected to high stress loads applied at high speeds and at varying angles of incidence, where the prevalent mode of wear is high-stress gouging/sliding impact abrasion. Examples include crusher liners, wear liners in hoppers and chutes, picks on roadheaders, discs on tunnel boring machines and ground engaging tools. Abrasion under these conditions is characterised by a high material removal rate and thus has a direct bearing on wear rates and service life of the equipment concerned. However, at present there appears to be no method for rock abrasiveness assessment under these conditions. This paper describes a new Gouging Abrasion method and apparatus for testing abrasivity of rocks under high-stress gouging/sliding impact wear. A Gouging Abrasion Index (Gi) is introduced, which can be used for prediction and assessment of component life expectancy and efficiency of mineral processing and materials handling equipment. Experimental data from Gouging Abrasion testing of numerous Australian rock types are presented. It is suggested that the results of Gi testing can be used for wear rate predictions for a variety of mineral processing and materials handling equipment working under high-stress gouging/sliding impact abrasion conditions.  相似文献   

Geotechnical properties of evaporite soils of the Dead Sea area     

Sam Frydman  Josef Charrach  Ian Goretsky 《Engineering Geology》2008,101(3-4):236-244

The Dead Sea Basin is the lowest point on earth and is tectonically subsiding. During the Holocene Period the climate became much drier with increasing evaporation whereby initially lacustrine sediments were deposited from the non-marine brines, giving a multi-layered stratigraphy of lime carbonate and halite sediments. The lime carbonate sediments are comprised of laminated, clay to silt sized, clastic sediments (calcite) and authigenic aragonite and gypsum. The halite commonly appears as rock salt. Chemical industries, based on harvesting the salts from the Dead Sea, have developed on both the Israeli and the Jordanian sides of the basin. The lime carbonate soils are used for dike construction, and these soils, together with significant salt layers, are encountered in the foundations of structures, dikes, and tailings dams, requiring definition of their geotechnical properties. Use of standard soil mechanics definitions and testing approaches for the lime carbonates have been found inapplicable, particularly in view of their exceptionally high saline content, and it has been necessary to develop new concepts. The rock salt is encountered at shallow depths, with unit weights considerably lower than those usually discussed in the literature, and with correspondingly different mechanical properties. The geotechnical properties of these soils, and approaches used to define them, are discussed in the paper.  相似文献