Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads     

Cheng‐Der Wang  Jyh‐Jong Liao 《国际地质力学数值与分析法杂志》2002,26(14):1449-1476

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

The similitude equation in magnetotelluric inversion     

S. E. Dosso  D. W. Oldenburg 《Geophysical Journal International》1991,106(2):507-509

  相似文献   

Analytical solutions of one‐dimensional infiltration before and after ponding     

Jiann‐Mou Chen  Yih‐Chi Tan  Chu‐Hui Chen 《水文研究》2003,17(4):815-822

This paper is a continuation of previous research, which obtained a convenient solution for arbitrary surface fluxes before ponding. By means of Fourier Transformation this has been extended to derive analytical solutions of a linearized Richards' equation for arbitrary input fluxes after surface saturation. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

岩体三维节点偶对分析及其应用          下载免费PDF全文

王思敬  张菊明 《地质科学》1991,(3):277-287

本文讨论了节点偶对分析的三维扩展。节点偶对分析是针对摩擦滑动节理单元的约束边界进行的序列矢量判定。在三维节理单元的分析中,几何约束和相应的力学判据极为复杂,采用节点偶对等效结合力方法才能迎刃而解。文中对三维转向节理模型的分析得到合理的结果,它表明本文所提出的方法可成功地应用于节理岩体的有限元分析。  相似文献   

新疆库车新生代前陆褶皱冲断带的变形特征、时代和机制   总被引：18，自引：4，他引：14       下载免费PDF全文

李日俊  吴根耀  雷刚林  张敬洲  王月然  刘亚雷 《地质科学》2008,43(3):488-506

库车前陆褶皱冲断带自北向南可分为基底冲断带、箱状背斜带、梳状背斜带和挠曲褶皱带,东西方向上可分为西段、中段和东段。本文分段叙述了各变形带的变形特征,指出东段箱状背斜带不发育,秋里塔格山脉(构造带)东延未进入东段,因而总体看自西向东变形强度减弱,地形上趋于夷平。该冲断带的形成经历了两次重大的冲断活动,分别发生在中新世和早(-中)更新世;相应地,该带可分为南、北两个"盆""山"亚系统,两者在地层记录、变形期次和变形机制上尚有若干差异。库车前陆褶皱冲断带的发育,除了受南天山的冲断和向南扩展引起的近南北向挤压应力场控制外,还受到基底断裂在新生代的活化和膏盐层底辟的制约,前者以近北西向的构造变换带及其共轭发育的近北东向断层最为重要,后者既控制了秋里塔格山脉的形成(主要受垂直的挤压应力场作用),也在库车前陆褶皱冲断带东西方向的变形分段中起了重要作用。文章还讨论了变形与地貌发育的关系和在油气勘探中的指导意义。  相似文献   

The linearisation of three dimensional drag force in random seas with current     

R.S. Langley 《Applied Ocean Research》1984,6(3):126-131

A frame invariant linearisation method for three-dimensional drag force in random seas with current is presented. Numerical results are compared with those obtained from a commonly used linearisation method which is based on a non-frame invariant approximation to the drag force. Significant differences are discovered and the present method is found to show closer agreement with computed time histories of the true drag force.  相似文献   

相空间反演方法在表层水温预报中的应用   总被引：4，自引：1，他引：4  

魏恩泊  田纪伟  李凤歧  苏育嵩 《海洋与湖沼》1997,28(3):315-319

利用相空间理论及方法对渤、黄、东海共4个站位近十几年的旬平均SST进行分析。结果表明：表层水温具有混饨特性，其吸引子关联维数平均约为1．23、嵌入相空间维数为6（渤、黄海）和7（东海178号站位）、二阶Renyi熵平均约为3．7×10-4（1／d）及平均可预报时间尺度平均为27个点；基于以上分析结果运用相空间反演方法建立了旬平均SST的反演模型，并且在试预报的前5旬的最大相对误差约为4．2％。  相似文献   

一种带自由面的三维船体贴体网络的数值生成     

李廷秋  缪国平  刘应中 《海洋工程》1996,(1)

本文提出了一个生成自由面的三维船体贴体网格的数值方法。文中以静水面以上的船体型线作为描述非定常自由面的计算网格域，进一步完善了我们以往开发的无法考虑兴波与静水面以上的船体型线相互作用对船舶粘性流动影响的网格生成方法。静水面以上的初始自由面网格分别沿船面法线η及切线ζ方向的曲线长的指数进行分布，即可极方便地调节自由面在船面及静水面附近的网格间距，也保证了在数值离散三维Ｐｏｉｓｓｏｎ方程时具有相当好的收敛性。这种方法的特点是计算量相当小，尤其能极方便地控制网格在船面簿粘性层中及静水面附近的分布。以Ｓｅｒｉｅｓ６０船模作为计算算例，带自由面的网格分布是相当满意的  相似文献   

A dynamic response analysis of tension leg platforms including hydrodynamic interaction in regular waves     

Chuel-Hyun Kim  Chang-Ho Lee  Ja-Sam Goo   《Ocean Engineering》2007,34(11-12):1680-1689

A numerical procedure is described for predicting the motion and structural responses of tension leg platforms (TLPs) in waves. The developed numerical approach, in a TLP is assumed to be flexible instead of rigid, is based on a combination of the three dimensional source distribution method and the finite-element method. The hydrodynamic interactions among TLP members, such as columns and pontoons, are included in the motion and structural response analysis. Numerical results are compared with the experimental and numerical ones. The results of comparison confirmed the validity of the proposed approach.  相似文献   

Three‐dimensional simulation of tsunami run‐up around conical island     

Byung Ho Choi  Dong Chule Kim  Efim Pelinovsky  Seung Buhm Woo 《Coastal Engineering》2007

At the circular Babi Island in the Flores tsunami (1992) and pear shaped island in the Okushiri event (1993), unexpectedly large tsunami run‐up heights in the lee of conic islands were observed. The flume and basin physical model studies were conducted in the Coastal Hydraulic Laboratory, Engineering Research and Development Center, U.S. Army Corps of Engineers to provide a better understanding of the physical phenomena and verify numerical models used in predicting tsunami wave run‐up on beaches, islands, and vertical walls. Reasonably accurate comparison of run‐up height of solitary waves on a circular island has been obtained between laboratory experimental results and two‐dimensional computation model results. In this study we apply three‐dimensional RANS model to simulate wave run‐up on conical island. In the run‐up computation we obtain that 3D calculations are in very good comparison with laboratory and 2D numerical results. A close examination of the three‐dimensional velocity distribution around conical island to compare with depth‐integrated model is performed. It is shown that the velocity distribution along the vertical coordinate is not uniform: and velocity field is weaker in the bottom layer and higher on the sea surface. The maximum difference (about 40%) appears at the time when solitary wave reached the circular island.  相似文献