港口靠船桩工作性状计算的双参数法   总被引：8，自引：0，他引：8  

谢耀峰 《海洋工程》2002,20(2):38-42,48

港口靠船桩是承受重复性荷载或多循环荷载的一种横向承载桩。双参数法能较好地描述靠船桩 (单桩、群桩 )的桩土工作性状。用双参数法进行计算时 ,所给的地面条件必须由重复荷载或多循环荷载作用下实测出来。根据现场试桩资料 ,标定桩土参数 ,即k =mx1/n的指数l/n、桩土相对柔度系数α、桩土综合刚度EI等值 ,可以用来设计试桩附近局部地区同类条件下的其它长桩。对于没有进行试桩的某些工程 ,可以联合运用双参数法和p -y曲线法进行桩的分析  相似文献   

利用消去刚度法进行剪切型系统物理参数识别     

王树青  李华军 《中国海洋大学学报(自然科学版)》2004,34(6):1085-1089

提出了 1种能够比较准确地识别剪切型体系的结构参数 (各层质量和层间刚度 )的方法———消去刚度法。该方法从剪切型结构体系的特征值问题出发 ,利用剪切型结构系统质量矩阵和刚度矩阵的特殊形式 ,通过消去各层的刚度系数 ,得到了结构系统的各层质量比表达式。在结构总质量已知的情况下 ,仅利用系统的任意两阶模态信息就可以确定出各层质量 ,并进而计算出层间刚度 ,实现了结构物理参数的递推识别。数值模拟结果表明 ,该方法识别精度较高 ,便于工程应用 ,可以用于类似结构体系的物理参数的初步估计。  相似文献   

胶州湾三维变动边界的潮流数值模拟   总被引：35，自引：3，他引：35  

孙英兰  张越美 《海洋与湖沼》2001,32(4):355-362

基于Blumberg等（1986）的河口、陆架和海洋模式，引入变边界处理技术，建立了胶州湾三维变动边界的潮流模型，模型以σ-正交曲线坐标下三维非线性潮波方程为基本方程，引入2.5阶瑞封闭方程组，采用分裂算子法数值求解方程组，利用湍封闭方程求解垂直紊动粘滞系数，采用干湿网格方法模拟潮流漫滩过程，三维变动边界潮流模型计算结果与实测值吻合良好。  相似文献   

Acoustic and stiffness properties of gillnets as they relate to small cetacean bycatch     

Mooney  T. Aran; Au  Whitlow W. L.; Nachtigall  Paul E.; Trippel  Edward A. 《ICES Journal of Marine Science》2007,64(7):1324-1332

  相似文献   

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses   总被引：1，自引：0，他引：1  

Byoung Wan Kim  Sa Young Hong  Jo Hyun Kyoung  Seok Kyu Cho 《Ocean Engineering》2007,34(11-12):1668-1679

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.  相似文献   

Effects of variable winds on biological productivity on continental shelves in coastal upwelling systems     

Louis W. Botsford  Cathryn A. Lawrence  Edward P. Dever  Alan Hastings  John Largier   《Deep Sea Research Part II: Topical Studies in Oceanography》2006,53(25-26):3116

The production and distribution of biological material in wind-driven coastal upwelling systems are of global importance, yet they remain poorly understood. Production is frequently presumed to be proportional to upwelling rate, yet high winds can lead to advective losses from continental shelves, where many species at higher trophic levels reside. An idealized mixed-layer conveyor (MLC) model of biological production from constant upwelling winds demonstrated previously that the amount of new production available to shelf species increased with upwelling at low winds, but declined at high winds [Botsford, L.W., Lawrence, C.A., Dever, E.P., Hastings, A., Largier, J., 2003. Wind strength and biological productivity in upwelling systems: an idealized study. Fisheries Oceanography 12, 245–259]. Here we analyze the response of this model to time-varying winds for parameter values and observed winds from the Wind Events and Shelf Transport (WEST) study region. We compare this response to the conventional view that the results of upwelling are proportional to upwelled volume. Most new production per volume upwelled available to shelf species occurs following rapid increases in shelf transit time due to decreases in wind (i.e. relaxations). However, on synoptic, event time-scales shelf production is positively correlated with upwelling rate. This is primarily due to the effect of synchronous periods of low values in these time series, paradoxically due to wind relaxations. On inter-annual time-scales, computing model production from wind forcing from 20 previous years shows that these synchronous periods of low values have little effect on correlations between upwelling and production. Comparison of model production from 20 years of wind data over a range of shelf widths shows that upwelling rate will predict biological production well only in locations where cross-shelf transit times are greater than the time required for phytoplankton or zooplankton production. For stronger mean winds (narrower shelves), annual production falls below the peak of constant wind prediction [Botsford et al., 2003. Wind strength and biological productivity in upwelling systems: an idealized study. Fisheries Oceanography 12, 245–259], then as winds increase further (shelves become narrower) production does not decline as steeply as the constant wind prediction.  相似文献   

Proportioning earthquake‐resistant RC frames in central/eastern U.S.     

JoAnn Browning 《地震工程与结构动力学》2002,31(6):1267-1280

A maximum allowable period criterion is used to determine reasonable stiffness requirements for reinforced concrete frames with the seismicity associated with central and eastern U.S. A general relationship is developed to describe the displacement demand expected for central and eastern U.S. based on a survey of available ground motions, opinions of seismologists, and code‐based provisions. A series of hypothetical reinforced concrete frames is proportioned using a maximum allowable period criterion and evaluated for expected maximum displacement response using non‐linear dynamic analyses and a suite of ground motions. Results indicate that for the reinforced concrete structural systems considered in the study, proportioning for gravity loads will provide sufficient stiffness in central and eastern U.S. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

A non-linear stress-stiffness model for geomaterials at small to intermediate strains     

S. Shibuya 《Geotechnical and Geological Engineering》2002,20(4):333-369

A double exponential fitting model (DEFM) capable of expressing the non-linear stress-stiffness relationship of geomaterials has been proposed by Shibuya et al. (1997). The model comprises two material constants; the elastic stiffness at very small strains and the strength, together with other free parameters to determine the complete stress-stiffness relationship. In this paper, the capability of the original function used for DEFM in simulating the tangent stiffness-stress relationship of geomaterials is first discussed. Second, the methods for determining the free model parameters, as well as its conversion to obtain a stress-strain relationship are proposed. The applicability of DEFM to predicting non-linear stress-stiffness relationship is examined in detail in a total of forty-nine fitting cases of compression test data on sedimentary rock, artificial soft rock and soft clay. It is found that the DEFM is effective in expressing the non-linear stress-stiffness relationship of various kinds of geomaterials at small to intermediate strains, say less than 0.5%. The superiority of this model compared to other fitting models currently in use is also demonstrated in some of the fitting cases.  相似文献   

ISO-834标准火灾作用后钢管混凝土的轴压刚度和抗弯刚度   总被引：4，自引：1，他引：4  

霍静思  韩林海 《地震工程与工程振动》2002,22(5):143-151

火灾后钢管混凝土的轴压刚度和抗弯刚度是钢管混凝土结构变形性能和抗震分析的重要指标，也是火灾后钢管混凝土修复和加固的重要依据之一，本文利用数值方法计算了标准火灾作用后钢管混凝土轴压构件和纯弯构件荷载-变形关系曲线，分析了受火时间、材料强度、含钢率、截面尺寸等因素的影响规律，最后推导了标准火灾作用后钢管混凝土轴压刚度和抗弯刚度的简化计算公式，所得结果可供有关钢管混凝土结构工程设计时参考。  相似文献   

钢筋砼摩擦耗能支撑框架结构的单元刚度和力学模型分析     

李慧峰  张玉蓉 《地震研究》2002,25(1)

为研究钢筋砼摩擦耗能支撑框架结构的动力反应性能 ,对其中的摩擦耗能器单元和框架杆单元的单元刚度和力学模型做了分析。钢筋砼摩擦耗能支撑单元由支撑杆单元和钢板—橡胶摩擦耗能器单元组成 ,支撑单元可取空间杆单元 ,摩擦耗能器单元为平面应力矩形单元。摩擦耗能器单元的剪切恢复力曲线为理想的弹塑性曲线 ,根据耗能器单元的力学模型 ,可确定其在每一时刻的刚度 ;框架结构空间杆单元的恢复力模型采用双线型模型 ,根据杆单元的力学模型 ,可确定其在每一时刻的刚度。并利用所编制的程序对十层单榀两跨空间普通框架和摩擦耗能支撑框架在地震作用下进行了弹塑性反应时程分析 ,结果表明耗能支撑框架的顶层最大位移明显小于普通框架  相似文献