CHARACTERIZATION OF LACTATE DEHYDROGENASE ISOZYME PATTERN AND MORPHOLOGY OF THREE MARINE FISH CELL LINES     

郭华荣  张士璀  李红岩  童裳亮  相建海 《中国海洋湖沼学报》2002,20(3):226-231

Three continuous marine fish cell lines of FG (i. e., Hounder Gill) from flounder (Paralichthys olivaceus) gill, SPH (i. e. , Sea Perch Heart) from sea perch (Lateolabrax japonicus) heart and RSBF (i.e., Red Sea Bream Fin) from red sea bream (Pagrosomus major) fin, were characterized by lactate dehydrogenase (LDH) isozyme and morphological analysis. The LDH isozyme patterns of these three cell lines and their corresponding tissues of origin were investigated and compared. The results showed: (1) No difference was found in the LDH isozyme patterns of FG and flounder gill tissue. However, the LDH isozyme patterns of SPH and RSBF were significantly different from their corresponding tissues of origin; (2) LDH isozyme patterns of FG, SPH and RSBF were markedly different from each other and could serve as genetic markers for species identification and detection of cross contamination. Morphological change analysis of these three cell lines in comparison to their original tissues indicated that FG cells still appeared epithelioid without morphological transformation. However, morphological changes were found in SPH and RSBF compared to their original tissues. Therefore, the cellular morphology was still plastic in the relatively stable culture conditions, and it was possible that change of LDH patterns wasrelated to morphological changes of fish cells in vitro.  相似文献   

Biostratigraphic and aminostratigraphic constraints on the age of the Middle Pleistocene glacial succession in north Norfolk,UK     

Richard C. Preece  Simon A. Parfitt  G. Russell Coope  Kirsty E. H. Penkman  Philippe Ponel  John E. Whittaker 《第四纪科学杂志》2009,24(6):557-580

Considerable debate surrounds the age of the Middle Pleistocene glacial succession in East Anglia following some recent stratigraphical reinterpretations. Resolution of the stratigraphy here is important since it not only concerns the glacial history of the region but also has a bearing on our understanding of the earliest human occupation of north‐western Europe. The orthodox consensus that all the tills were emplaced during the Anglian (Marine Isotope Stage (MIS) 12) has recently been challenged by a view assigning each major till to a different glacial stage, before, during and after MIS 12. Between Trimingham and Sidestrand on the north Norfolk coast, datable organic sediments occur immediately below and above the glacial succession. The oldest glacial deposit (Happisburgh Till) directly overlies the ‘Sidestrand Unio‐bed’, here defined as the Sidestrand Hall Member of the Cromer Forest‐bed Formation. Dating of these sediments therefore has a bearing on the maximum age of the glacial sequence. This paper reviews the palaeobotany and describes the faunal assemblages recovered from the Sidestrand Unio‐bed, which accumulated in a fluvial environment in a fully temperate climate with regional deciduous woodland. There are indications from the ostracods for weakly brackish conditions. Significant differences are apparent between the Sidestrand assemblages and those from West Runton, the type site of the Cromerian Stage. These differences do not result from contrasting facies or taphonomy but reflect warmer palaeotemperatures at Sidestrand and a much younger age. This conclusion is suggested by the higher proportion of thermophiles at Sidestrand and the occurrence of a water vole with unrooted molars (Arvicola) rather than its ancestor Mimomys savini with rooted molars. Amino acid racemisation data also indicate that Sidestrand is significantly younger than West Runton. These data further highlight the stratigraphical complexity of the ‘Cromerian Complex’ and support the conventional view that the Happisburgh Till was emplaced during the Anglian rather than the recently advanced view that it dates from MIS 16. Moreover, new evidence from the Trimingham lake bed (Sidestrand Cliff Formation) above the youngest glacial outwash sediments (Briton's Lane Formation) indicates that they also accumulated during a Middle Pleistocene interglacial – probably MIS 11. All of this evidence is consistent with a short chronology placing the glacial deposits within MIS 12, rather than invoking multiple episodes of glaciation envisaged in the ‘new glacial stratigraphy’ during MIS 16, 12, 10 and 6. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine     

ROY M. FRINGS  MAARTEN G. KLEINHANS  STEFAN VOLLMER 《Sedimentology》2008,55(6):1571-1593

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.  相似文献   

Statistical analysis of sand grain/bed collision process recorded by high-speed digital camera   总被引：1，自引：0，他引：1  

DAWEI WANG  YUAN WANG  BIN YANG  WEI ZHANG† 《Sedimentology》2008,55(2):461-470

A high‐speed digital camera was employed to record the sand grain/bed collision process. With image processing and a statistical method, a series of parameters of the collision process were obtained. The results show that the collision process of a grain with rebounding can be represented by two parameters: the kinetic energy restitution coefficient and the collision angle. Both parameters satisfy a normal distribution, and they are dependent on one another. With an increase of the collision angle, the distribution of the kinetic energy restitution gradually reduces from a broad to a narrow range with low values. The percentage of vertical velocity restitution coefficients greater than 1 can reach 70% or more, which ensures that the settling time of the sand grains in the air increases and that they receive more energy from the air to progress the saltation movement.  相似文献   

扬子及周缘地区上奥陶统-下志留统烃源岩发育环境及其控制因素   总被引：6，自引：0，他引：6  

严德天  王清晨  陈代钊  汪建国  王卓卓 《地质学报》2008,82(3):321-327

扬子地区下古生界发育了上奥陶统五峰组和下志留统龙马溪组两套有效烃源岩,查清其发育环境及其控制因素具有重要的科学理论和油气勘探意义.晚奥陶世开始,扬子地区进入碎屑岩陆棚演化阶段;五峰期-龙马溪期,扬子地区主体为局限的深水陆棚环境,总体呈现出浅水陆棚、深水陆棚、次深海共存的古地理格局.沉积体系展布和沉积演化主要受扬子陆块与华夏陆块的汇聚作用控制.扬子地区上奥陶统-下志留统烃源岩的形成与生烃母质生物的高生产力和高埋藏率、冰期-冰后期之交的气温快速转暖、海平面快速上升以及粘土矿物在有机质富集保存过程中的赋存驻留作用等密切相关.  相似文献   

煤岩对压裂裂缝长期导流能力影响的实验研究   总被引：7，自引：0，他引：7  

张士诚  牟善波  张劲  王雷 《地质学报》2008,82(10):1444-1449

煤层中一般都伴有煤层气,通过压裂可以将煤层气释放出来,一方面能够获得清洁能源,另一方面可以提高煤田的安全开采。煤岩层自身特点决定了其在压裂中应用的实验评价方法及结论应具有特殊性,本文主要针对煤层气井的煤岩层压裂裂缝长期导流能力进行实验评价研究。实验表明,与砂岩地层不同,煤岩的硬度较小,压裂中支撑剂嵌入情况较严重;煤岩易破碎,碎屑颗粒充填到支撑剂中;同时支撑剂存在破碎及吸附伤害等,多种作用导致支撑裂缝的导流能力降低。实验中,以煤岩层闭合压力为一个重要的参数,实验对比分析了在不同闭合压力下,铺砂浓度、支撑剂粒径、支撑剂种类及组合的选择、支撑剂颗粒的破碎与嵌入、压裂液残渣等因素对煤岩层导流能力的影响。本文的实验结论为,嵌入对煤岩层支撑裂缝的导流能力伤害很大,加大铺砂浓度、采用低破碎率支撑剂、降低压裂液伤害能在一定程度上提高煤层裂缝的导流能力,但影响程度随闭合压力的增加而逐渐降低。本文所得出的结论对今后煤层气的开发及设计施工具有一定的指导意义。  相似文献   

河口区治江围涂对杭州湾水动力及海床影响分析   总被引：5，自引：2，他引：5  

倪勇强  林洁 《海洋工程》2003,21(3):73-77

自二十世纪六十年代起，钱塘江河口进行了大规模治江围涂，人类活动对杭州湾水域的影响越来越为人们关注。基于实测资料的分析和潮汐水流数学模型计算，探讨了钱塘江河口区围涂对杭州湾水域潮汐水流和海床的影响。研究成果可为钱塘江河口和杭州湾的进一步开发治理和环境保护提供科学依据。  相似文献   

Morphology and tectonics of the Romanche Transform and its environs     

R. C. Searle  M. V. Thomas  E. J. W. Jones 《Marine Geophysical Researches》1994,16(6):427-453

  相似文献   

扇贝外套腔内的共栖生纤毛虫　Ⅰ.蠕状康纤虫(Cohnilembus verminus)的形态学研究     

胡晓钟  徐奎栋  宋微波 《中国海洋大学学报(自然科学版)》1996,(2)

研究扇贝外套腔内栖生的纤毛虫一蠕状康纤虫Cohnilembusverminus（Muller，1786）的形态、核器及纤毛图式。结果显示其口器结构为；M1呈单列结构，约占体长的1／2，M2由4组毛基粒构成，PM起自M2末端，Sc约由5个毛基粒构成。此外，还列表比较了不同作者报导的C．verminus种群及其它6种已知的康纤虫的主要性状特征。  相似文献   

纳米碳酸钙材料的工业合成与应用     

姬泓巍  徐环  辛惠蓁  宁霞 《中国海洋大学学报(自然科学版)》2002,32(4):634-640

该文对目前工业上生产纳米碳酸钙的方法作了较为详细的综述。对一步碳化法、两步碳化法、多段喷雾碳化法、旋转填充床碳化反应器碳化技术制备链形、纺锤形、球形、立方形等不同形状的纳米碳酸钙材料的方法进行了比较和总结  相似文献