排序方式: 共有31条查询结果,搜索用时 15 毫秒
1.
2.
Y. Y. Huyan T. S. Liu F. J. Jiang X. Z. Chen X. Q. Ma 《Australian Journal of Earth Sciences》2018,65(6):863-875
Residual and movable porosity are significant parameters for characterising petrophysical properties, especially in tight reservoirs. Eight tight sandstone samples from the upper Paleozoic gas-bearing strata in the Kangning area, from the eastern margin of the Ordos Basin, were analysed using nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), petrography, and porosity and permeability tests. The lithology and pore types were identified and classified using petrography and SEM. The residual and movable porosity were obtained with NMR. In addition, NMR was used to visualise pore structure and pore size distribution. The results suggest that the upper Paleozoic sandstones in the study area mainly comprise feldspathic litharenite and litharenite. The sandstone porosity and permeability are low, with means of 5.9% and 0.549 mD, respectively. Four pore types exist in the tight sandstones: residual primary pores, grain dissolution pores, micropores (clay-dominated) and microfractures. The T2 spectra under water-saturated conditions correlate with pore size and can be used to distinguish small and large pores based on the transverse relaxation time cutoff value of 10 ms, which corresponds to a pore diameter of 0.232 μm. Small pores account for 72% of the pores in the tight sandstones. The continuous bimodal T2 spectra suggest good connectivity between small and large pores, despite the low porosity and permeability. In this study, the movable porosity of the major tight sandstone gas reservoirs is higher than the residual porosity, which confirms the effective evaluation of movable porosity to tight sandstone reservoirs, based on NMR experiments. 相似文献
3.
4.
D. V. Korost G. A. Kalmykov E. V. Reshetov V. S. Belokhin 《Moscow University Geology Bulletin》2009,64(2):130-137
This paper discusses modern techniques of identification of reservoir rocks of complex mineral composition in low-thickness layers. The principal purpose of the study is the elaboration of an optimal set of petrophysical investigations used for interpretation of well-logging (WL) data. The solution of the problem lies in generating a mineral-component model of sediments and in finding a range of admissible values of every macro component and its petrographic parameters. 相似文献
5.
基于地质统计先验信息的储层物性参数同步反演 总被引:4,自引:1,他引:3
本文提出的储层物性参数同步反演是一种高分辨率的非线性反演方法,该方法综合利用岩石物理和地质统计先验信息,在贝叶斯理论框架下,首先通过变差结构分析得到合理的变差函数,进而利用快速傅里叶滑动平均模拟算法(Fast Fourier TransformMoving Average,FFT-MA)和逐渐变形算法(Gradual Deformation Method,GDM)得到基于地质统计学的储层物性参数先验信息,然后根据统计岩石物理模型建立弹性参数与储层物性参数之间的关系,构建似然函数,最终利用Metropolis算法实现后验概率密度的抽样,得到物性参数反演结果。并将此方法处理了中国陆上探区的一块实际资料,本方法的反演结果具有较高的分辨率,与测井数据吻合度较高;由于可以直接反演储层物性参数,避免了误差的累积,大大减少了不确定性的传递,且计算效率较高。 相似文献
6.
7.
Measurement and Analysis of Thermal Conductivity of Rocks in the Tarim Basin, Northwest China 总被引:3,自引:0,他引:3
: As a parameter that describes heat transmission properties of rocks, thermal conductivity is indispensable for studying the thermal regime of sedimentary basins, and retrieving high-quality data of thermal conductivity is the basis for geothermal related studies. The optical scanning method is used here to measure the thermal conductivity of 745 drill-core samples from the Tarim basin, the largest intermontane basin with abundant hydrocarbon potential in China, and water saturation correction is made for clastic rock samples that are of variable porosity. All the measured values, combined with previously published data in this area, are integrated to discuss the distribution characteristics and major controlling factors that affect the thermal conductivity of rocks in the basin. Our results show that the values of thermal conductivity of rocks generally range from 1.500 to 3.000 W/m·K with a mean of 2.304 W/m·K. Thermal conductivity differs considerably between lithological types: the value of a coal sample is found to be the lowest as being only 0.249 W/m·K, while the values for salt rock samples are the highest with a mean of 4.620 W/m·K. Additionally, it is also found that the thermal conductivity of the same or similar lithologic types shows considerable differences, suggesting that thermal conductivity cannot be used for distinguishing the rock types. The thermal conductivity values of mudstone and sandstone generally increase with increasing burial depth and geological age of the formation, reflecting the effect of porosity of rocks on thermal conductivity. In general, the mineral composition, fabric and porosity of rocks are the main factors that affect the thermal conductivity. The research also reveals that the obvious contrast in thermal conductivity of coal and salt rock with other common sedimentary rocks can induce subsurface temperature anomalies in the overlying and underlying formations, which can modify the thermal evolution and maturity of the source rocks concerned. This finding is very important for oil and gas resources assessment and exploration and needs further study in detail. The results reported here are representative of the latest and most complete dataset of thermal conductivity of rocks in the Tarim basin, and will provide a solid foundation for geothermal studies in future. 相似文献
8.
Electrical geophysical methods, including electrical resistivity, time‐domain induced polarization, and complex resistivity, have become commonly used to image the near subsurface. Here, we outline their utility for time‐lapse imaging of hydrological, geochemical, and biogeochemical processes, focusing on new instrumentation, processing, and analysis techniques specific to monitoring. We review data collection procedures, parameters measured, and petrophysical relationships and then outline the state of the science with respect to inversion methodologies, including coupled inversion. We conclude by highlighting recent research focused on innovative applications of time‐lapse imaging in hydrology, biology, ecology, and geochemistry, among other areas of interest. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
9.
10.
经前人研究结果表明,珠江口盆地M地区常规叠后波阻抗较难识别储层和反映储层物性。使用叠前同步反演方法,即利用叠前CRP道集和测井信息,采用Fatti方程的改进形式进行反演,可同时获得纵波阻抗、横波阻抗、密度等弹性参数。结果表明,密度属性能很好地区分储层,反映储层物性,目的层灰岩和砂岩储层的沿层密度属性很好地反映了储层横向变化规律。实钻结果表明,预测结果与井实测结果吻合度较高,表明利用叠前同步反演技术进行珠江口盆地M地区储层预测是可行的。 相似文献