基于PSR-WSVM模型的边坡位移预测     

李建新  刘小生  肖钢  周文  刘仁志 《大地测量与地球动力学》2020,40(6):577-580

为建立高精度的边坡位移预测模型，采用相空间重构（PSR）将边坡位移时间序列数据转换为多维数据，同时构造小波核函数改进的支持向量机模型，建立PSR-WSVM模型并应用于边坡位移预测。将PSR-WSVM模型预测结果与传统支持向量机（SVM）模型、小波支持向量机（WSVM）模型和基于相空间重构的支持向量机（PSR-SVM）模型预测结果进行对比，通过平均绝对误差（MAE）、平均绝对误差百分比（MAPE）和均方根误差（RMSE）3个精度评价指标验证PSR-WSVM模型的可行性。工程实例结果表明，PSR-WSVM模型预测结果的3个精度评价指标都优于另外3种模型，边坡位移预测的精度明显提升。  相似文献   

Atmospheric radiative transfer simulation for atmospheric correction of remote sensing data     

Yunfei Bao Shengbo Chen 《东北亚地学研究》2006,9(1):100-108

IntroductionThe radiance leaving the earth-atmosphere sys-tem which can be sensed by a satellite borne ra-diometer is the sum of radiation emission fromtheearth surface and each atmospheric level that aretransmittedtothe top of the atmosphere.The radia-tion emissionfromthe earthsurface andthe radianceof each atmospheric level can be separated fromtheradiance at the top the atmospheric level a satellitemeasured.Thus,the earth surface parameters willbe retrieved from the surface radiance after a…  相似文献   

差分法周跳探测与修复方法改进     

郑作亚  程宗颐  黄珹 《中国科学院上海天文台年刊》2004,(1)

在目前常用的周跳探测与修复方法基础上 ,提出了首先将观测资料按照观测历元不连续分成若干小弧段 ,然后利用差分法进行周跳探测 ,根据差分后周跳放大的特性判断周跳和野值 ,并确定其位置利用宽带组合和电离层组合的方法解算周跳大小。通过实例验证了其有效性。  相似文献   

Metamorphism in Archaean greenstone belts: calculated fluid compositions and implications for gold mineralization     

R. POWELL  T. M. WILL  G. N. PHILLIPS 《Journal of Metamorphic Geology》1991,9(2):141-150

An inescapable consequence of the metamorphism of greenstone belt sequences is the release of a large volume of metamorphic fluid of low salinity with chemical characteristics controlled by the mineral assemblages involved in the devolatilization reactions. For mafic and ultramafic sequences, the composition of fluids released at upper greenschist to lower amphibolite facies conditions for the necessary relatively hot geotherm corresponds to those inferred for greenstone gold deposits (X_CO2= 0.2–0.3). This result follows from the calculation of mineral equilibria in the model system CaO–MgO–FeO–Al₂O₃–SiO₂–H₂O–CO₂, using a new, expanded, internally consistent dataset. Greenstone metamorphism cannot have involved much crustal over-thickening, because very shallow levels of greenstone belts are preserved. Such orogeny can be accounted for if compressive deformation of the crust is accompanied by thinning of the mantle lithosphere. In this case, the observed metamorphism, which was contemporaneous with deformation, is of the low-P high-T type. For this type of metamorphism, the metamorphic peak should have occurred earlier at deeper levels in the crust; i.e. the piezothermal array should be of the ‘deeper-earlier’type. However, at shallow crustal levels, the piezothermal array is likely to have been of ‘deeper-later’type, as a consequence of erosion. Thus, while the lower crust reached maximum temperatures, and partially melted to produce the observed granites, mid-crustal levels were releasing fluids prograde into shallow crustal levels that were already retrograde. We propose that these fluids are responsible for the gold mineralization. Thus, the contemporaneity of igneous activity and gold mineralization is a natural consequence of the thermal evolution, and does not mean that the mineralization has to be a consequence of igneous processes. Upward migration of metamorphic fluid, via appropriate structurally controlled pathways, will bring the fluid into contact with mineral assemblages that have equilibrated with a fluid with significantly lower X_CO2. These assemblages are therefore grossly out of equilibrium with the fluid. In the case of infiltrated metabasic rocks, intense carbonation and sulphidation is predicted. If, as seems reasonable, gold is mobilized by the fluid generated by devolatilization, then the combination of processes proposed, most of which are an inevitable consequence of the metamorphism, leads to the formation of greenstone gold deposits predominantly from metamorphic fluids.  相似文献   

Structures in the phase space of a four dimensional symplectic map     

Ch. Skokos  G. Contopoulos  C. Polymilis 《Celestial Mechanics and Dynamical Astronomy》1996,65(3):223-251

We numerically investigate the projections of non periodic orbits in a 4-dimensional (4-D) symplectic map composed of two coupled 2-dimensional (2-D) maps. We describe in detail the structures that are produced in different planes of projection and we find how the morphology of the 4-D orbits is influenced by the features of the 2-D maps as the coupling parameter increases. We give an empirical law that describes this influence.  相似文献   

调频式电涡传感器微机实现的探讨     

林菁 《广东海洋大学学报》1996,(1)

分析了分频和ＣＴＣ计数采样中误读数的原因和解决方法，并利用微机软件实现非线性校正。此传感器用于位移测量系统中，具有０．０１ｍｍ的分辨率及优于１％的精度，可在－２０～６０℃温度范围内工作。  相似文献   

DCMT光电扫描主测微器的设计与研究     

李志刚  李焕信  方福胜  朱紫  许林生 《时间频率学报》1993,(1)

DCMT主测微器不同于其它类型的子午环测微器,它具有自校准测定仪器参数的功能。该测微器采用了活动光栅的方案,其优点是能观测近极星和各类准直像;活动光栅另一个显著优点是不同赤纬星几乎可用相同的观测时间.对“V”形光栅的工作原理和误差进行了详细讨论,并给出了一组严格的公式。其系统误差来源有:光栅形状改正、光栅驱动方向相对于光栅的倾斜、光栅驱动方向相对于赤径方向的倾斜、星径曲率改正。  相似文献   

激光天文动力学弱光锁相的研究     

廖安琪  倪维斗  施宙聪 《天文研究与技术》2002,331(3):88-100

近年来激光物理与应用的进展促成了激光天文动力学空间任务概念的提出。在激光天文动力学任务概念研究方面 ,必须对由远程航天器上传回的激光进行讯号的测量与处理。激光经过长距离的传输后 ,功率大幅下降 ,因此在空间任务概念的考虑上 ,弱光锁相是计划中关键性的技术。由航天器射来的激光 ,经过望远镜聚光后与本地激光进行锁相 ,由本地激光承载及传达太空激光的相位信息。实验中 ,我们使用 2支半导体激光泵浦非平面环形共振腔钇镏石激光 (Diodelaserpumpednon -planarringcavityNd :YAGlaser) ,分别代表远程的弱光及代表本地的强光 ,建立弱光锁相环路系统 (weak -lightphase -lockedloopsystem)。以中性光强度滤光器 (ND -filter;neutraldensityfilter)减弱光讯号来仿真远程激光传来的弱光。在相位探测部分使用均衡探测法 ,消除激光强度噪声 ,以提高讯噪比。同时配合适当的环路滤波器 ,控制激光频率 ,提高锁相的能力。对 2nW的弱光与 2mW的强光可长时间锁相 ,其均方根相位误差为 57mrad。 2 0 0pW的弱光与 2 0 0 μW的强光锁相时间可达 2h以上 ,其相位误差为 2 0 0mrad。 2 0pW的弱光与 2 0 0 μW的强光锁相时间亦可达 2h以上 ,其相位误差为 1 60mrad。最后 ,我们对 2pW的弱光与 2 0 0 μW的强光锁相 ,  相似文献   

时空概念中的椭球改正     

夏哲仁 《测绘学报》1991,20(3):190-200

  相似文献   

Crustal and upper mantle structures of the brazilian coast     

Jorge Luis De Souza 《Pure and Applied Geophysics》1991,136(2-3):245-264

The Rayleigh wave phase and group velocities in the period range of 24–39 sec, obtained from two earthquakes which occurred in northeastern brazil and which were recorded by the Brazilian seismological station RDJ (Rio de Janeiro), have been used to study crustal and upper mantle structures of the Brazilian coastal region. Three crustal and upper mantle models have been tried out to explain crustal and upper mantle structures of the region. The upper crust has not been resolved, due basically to the narrow period range of the phase and group velocities data. The phase velocity inversions have exhibited good resolutions for both lower crust and upper mantle, with shear wave velocities characteristic of these regions. The group velocity data inversions for these models have showed good results only for the lower crust. The shear wave velocities of the lower crust (3.86 and 3.89 km/sec), obtained with phase velocity inversions, are similar to that (=3.89 km/sec) found byHwang (1985) to the eastern South American region, while group velocity inversions have presented shear velocity (=3.75 km/sec) similar to that (=3.78 km/sec) found byLazcano (1972) to the Brazilian shield. It was not possible to define sharply the crust-mantle transition, but an analysis of the phase and group velocity inversions results has indicated that the total thickness of the crust should be between 30 and 39 km. The crustal and upper mantle model, obtained with phase velocity inversion, can be used as a preliminary model for the Brazilian coast.  相似文献