A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献   

PS测井在机场隧道地基勘查中的应用          下载免费PDF全文

范伟顺 《山东国土资源》2018,34(1)

PS测井技术是地震勘探方法之一,也是一种简便、快速、准确的原位测试技术。该文介绍了单孔法PS测井的原理及其在铁路工程勘察中的应用,主要包括根据等效剪切波,进行建筑抗震场地类别划分,铁路工程抗震场地类别划分。根据岩土动力学参数,达到评价岩体质量和划分围岩类别目的,利用剪切波速法估算岩土的承载力基本值。通过青岛机场隧道场地的工程实例说明了PS测井技术在岩土工程勘察设计中的应用情况及应用效果。  相似文献   

新疆绿洲城镇组群内部经济联系及空间差异测度研究          下载免费PDF全文

李雪梅 《干旱区地理》2019,42(1):180-186

绿洲城镇组群是新疆特殊区域形成的规模相对较小的单一中心空间自组织模式。运用城市中心性指数、城市经济联系模型和Theil系数对新疆八大绿洲城镇组群内部城镇中心性、经济联系及空间差异测度。结果显示：绿洲城镇组群内部的中心城市的中心性职能较强，周边城镇的中心性职能相对较弱，形成了单中心的空间自组织模式；绿洲城镇组群内部经济联系量和经济联系隶属度大小的排序一致，离中心城市的距离越近、经济发展水平越高，经济联系隶属度越高；近10 a年来绿洲城镇组群的整体空间差异一直在扩大，且呈现出继续扩大趋势。在此基础上，提出了建立区域合作协调机制、明确城镇组群发展方向、增强中心城市的辐射带动作用、实现产业合理分工以及构建制度保障体系促进绿洲城镇组群的协同发展。  相似文献   

论虚拟企业   总被引：1，自引：0，他引：1  

蔡久忠 《成都信息工程学院学报》2002,17(2):122-126

网络的出现和广泛运用，以及企业间的跨越了行业间的藩篱，推动了业际化的进程；业际化与网络相结合促使企业组织形式发生质变，出现了虚拟企业。与大工业时代的企业相比较，虚拟企业具有了全新的特征、类型、经济形式和生产模式，其经济效益提升到一个新的平台。  相似文献   

An approximate method for evaluating the shear band thickness in saturated soils     

X. B. Lu  Wang Shuyun  Wang Yihua  Peng Cui 《国际地质力学数值与分析法杂志》2004,28(15):1533-1541

A formula for the thickness of a shear band formed in saturated soils under a simple shear or a combined stress state has been proposed. It is shown that the shear band thickness is dependent on the pore pressure properties of the material and the dilatancy rate, but is independent of the details of the combined stress state. This is in accordance with some separate experimental observations. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry     

Jacques Desrues  Gioacchino Viggiani 《国际地质力学数值与分析法杂志》2004,28(4):279-321

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd  相似文献   

Formation of primary pit connection during conchocelis phase of Porphyra yezoensis （Bangiophyceae, Rhodophyta）     

帅莉姜明  段德麟 《中国海洋湖沼学报》2006,24(3):291-294

1 INTRODUCTION Pit connection is an important feature in Rhodophyta and significant in algal phylogeny. Various documents have illustrated the existence of pit-connection in red alga previously (Migita, 1967; Ramus 1969a, b; Bourne et al., 1970; Lee and F…  相似文献   

Paleoproterozoic Extensional Structure and Its Controlling on Mineralization in the East of Liaoning Province     

Yang Zhongzhu  Chen Shuliang  Li Xiandong  Wang Zhongjiang  Qu Hongxiang  Gang Jiang 《东北亚地学研究》2001,(1)

IntroductionThe area of eastern Liaoning is an importantmetal and nonmetal metallogenetic district in China,and the Liaohe group is one of the most importantstrata that hosts Pb, Zn, Au, B and Mg etcstratabound deposits. Up to now many geo1ogistssuch as Z…  相似文献   

The range of effects of azimuthal isotropy and EDA anisotropy in sedimentary basins   总被引：4，自引：0，他引：4  

Philip Wild  Stuart Crampin 《Geophysical Journal International》1991,107(3):513-529

  相似文献   

The second order characteristic condition for plastic flow     

Graham Weir  Roger Young 《国际地质力学数值与分析法杂志》2003,27(15):1299-1316

In this paper the second order characteristic (discontinuous bifurcation) condition is derived for the granular flow (fully plastic) equations. This second order bifurcation equation is shown to be formally identical to the first order localization requirement during steady elastoplastic deformation provided the elastic compliance tensor is substituted for the product of the plastic multiplier with the flow Hessian. For isotropic yield and flow functions the invariant form of the characteristic condition is given in detail, as well as an alternative expression in adapted co‐ordinates. The characteristic condition can be regarded as defining a hardening function which is maximized to identify the critical angles. When the method is applied to 3D Coulomb flow, Mohr's 3D fracture plane conditions are obtained uniquely. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献