排序方式： 共有24条查询结果，搜索用时 31 毫秒
1.
Mud volcanoes recently discovered on the offshore Calabrian Arc are investigated at two sites 60 km apart, in water depths of 1650--2300 m, using swath bathymetry, 2D&3D multichannel seismic and cores. The seabed and subsurface data provide information on their formation and functioning in relation to tectonic activity during the rapid Plio-Quaternary advance of the accretionary prism. Fore-arc extension and thrust-belt compression are seen to have involved two main phases of activity, separated by a regional unconformity recording a mid-Pliocene (3.5–3.0 Ma) tectonic reorganization. The two sites of mud volcanism lie in contrasting tectonic settings (inner fore-arc basin vs central fold-and-thrust belt) and record differing forms of seabed extrusive activity (twin mud cones and a caldera vs a broad mud pie). At both sites, subsurface data show that mud volcanism took place throughout the second tectonic phase, since the late Pliocene; differing forms of mud extrusion were accompanied by subsidence to form depressions beneath and within extrusive edifices up to 1.5 km thick. The basal subsidence depressions point to sources within the succession of thrusts underlying the inner to central Arc, consistent with microfossils within cored mud breccias from both sites that are derived from strata as old as Late Cretaceous. 相似文献
2.
3.
Collision leading to multiple-stage large-scale extrusion in the Qinling orogen: Insights from the Mianlue suture 总被引：10，自引：5，他引：10
Sanzhong Li Timothy M. Kusky Lu Wang Guowei Zhang Shaocong Lai Xiaochun Liu Shuwen Dong Guochun Zhao 《Gondwana Research》2007,12(1-2):121
The geologic framework of the Phanerozoic Qinling–Dabie orogen was built up through two major suturing events of three blocks. From north to south these include the North China craton (including the north Qinling block), the Qinling–Dabie microblock, and the South China craton (including the Bikou block), separated by the Shangdan and Mianlue sutures. The Mianlue suture zone contains evidence for Mesozoic extrusion tectonics in the form of major strike–slip border faults surrounding basement blocks, a Late Paleozoic ophiolite and a ca. 240–200 Ma thrust belt that reformed by 200–150 Ma thrusts during A-type (intracontinental) subduction. The regional map pattern shows that the blocks are surrounded by complexly deformed Devonian to Early Triassic metasandstones and metapelites, forming a regional-scale block-in-matrix mélange fabric. Five distinct tectonic units have been recognized in the belt: (1) basement blocks including two types of Precambrian basement, crystalline and transitional; (2) continental margin slices including Early Paleozoic strata, and Late Paleozoic fluviodeltaic sedimentary rocks, proximal and distal fan clastics, reflecting the development of a north-facing rift margin on the edge of the South China plate; (3) out of sequence oceanic crustal slices including strongly deformed postrift, deep-water sedimentary rocks, sheeted dikes, basalts, and mafic–ultramafic cumulates of a Late Paleozoic ophiolite suite, developing independent of the rift margin in a separate basin; (4) out-of-sequence island-arc slices; (5) accretionary wedge slices. All the tectonic units were deformed during three geometrically distinct deformation episodes (D1, D2 and D3 during 240–200 Ma). Units 2–4 involved southward thrusting and vertical then southward extrusion of about 20 km of horizontal displacement above the autochthonous basement during the D1 episode. Thrust slices 20 km south of the Mianlue suture are related to this vertical extrusion due to the same rock assemblages, ages and kinematics. The D2 and D3 episodes folded all the units in a thick-skinned style about east–west (D2) and west–northwest (D3) axes in the Mianlue suture zone. An early foreland propagating sequence of accretion of Late Paleozoic rocks deposited above the Yangtze craton is not involved in D1 deformation but is temporally equivalent to the D2 and D3 deformation in the Mianlue suture. Two stages of strike–slip faulting mainly occurred at the end of D2 and D3, respectively. During D2 deformation, the Bikou block was obliquely indented to the ESE into the Mianlue suture, rather than being thrust over the Mianlue suture from the north as a part of the Qinling–Dabie microblock. During D3 deformation, however, the Bikou block was bounded by the south boundary fault of the Mianlue suture, and the Yangpingguan fault on the south. These faults are coeval strike–slip faults, but of opposite senses, and accommodated minor southwestward extrusion of the Bikou block into Songpan–Ganze orogen. The other basement blocks north of the Mianlue suture were extruded eastward by about 20 km of lateral displacement, based on the offset of the Wudang dome, during the D3 episode due to the northeastward indentation of the Hannan complex of the South China craton. Post-D3 emplacement of granite, cutting across the strike–slip faults such as the Mianlue suture, provides a minimum age of 200 Ma for D3 deformation. Therefore, based on insights from the evolution of the Mianlue suture, the D2 and D3 episodes in the Mianlue suture and its neighbors are not responsible for and associated with the two-stage extrusion of the Dabie UHP-HP terranes from the Foping dome to the present erosional surface (more than 350 km). 相似文献
4.
桐柏山太白顶、殷店和天河口一带,发育有大量的L构造岩,拉伸线理极其发育,面理较弱,线理产状向南东东倾伏,倾伏角为1°～20°。桐柏山L构造岩具有以下主要特征：在三维空间上,L构造岩强烈发育杆状构造,这种“杆”状构造是由大量沿X轴方向定向排列连在一起的椭球体矿物构成的,其变形机制主要为石英的颗粒边界迁移和长石的位错蠕变,形成的平均压力为0.59GPa,平均温度为550 ℃～600 ℃,形成于中-高温-中压环境,变质相为高绿片岩相到低角闪岩相,形成深度大致在15～20 km,属于中地壳的产物。L构造岩在桐柏山的发现可能反映了桐柏山造山带中桐柏杂岩岩块相对两侧榴辉岩岩片具有近东西向挤出构造的特征。 相似文献
5.
北苏鲁荣成地区超高压变质带的形成与折返动力学 总被引：1，自引：0，他引：1
山东省荣成地区位于苏鲁高压-超高压变质带的东北部,以花岗质片麻岩、副片麻岩为主,夹有少量的榴辉岩、石榴辉石岩、麻粒岩、超基性岩、石英岩、大理岩和斜长角闪岩等,各类岩石的锆石中普遍含有柯石英包裹体,表明荣成地区岩石曾经历超高压变质作用过程。荣成地区区域构造格架表现为面理产状总体为NNE-SSW走向,向南转为由NE-SW走向,呈弧形展布,倾向SE或SSE,超高压变质岩石由一系列近平行的剪切岩片组成,岩片之间的分界线为一些韧性剪切带,是折返阶段角闪岩相-绿片岩相的产物。结合野外宏观变形现象、显微构造分析以及糜棱岩中石英的优选方位EBSD （electron backscatter diffraction,电子背散射技术）测量结果,可以判断北苏鲁荣成地区韧性剪切带主要形成于中、低温（550~350℃）条件,并具有由NW向SE“斜向正滑”的剪切指向。根据韧性剪切带中所含的榴辉岩透镜体的显微构造和绿辉石与金红石的优选方位的EBSD的研究,重塑超高压变质阶段的流变学特征：绿辉石和金红石都具有高温的滑移系组构模式。横穿苏鲁高压-超高压变质带的地震反射剖面揭示了苏鲁高压-超高压变质带呈厚10km以上的穹形板片,位于苏鲁高压-超高压变质板片下部的荣成及江苏刘山以韧性正断裂系列为主。Ar-Ar测年结果表明,发生这种伸展韧性剪切作用的时间在117~130Ma。位于板片上部的南苏鲁以韧性逆冲性断裂系列为主。基于以上各方面的研究,进一步验证了苏鲁超高压-超高压变质带折返动力学的挤出模式。 相似文献
6.
Sanzhong Li Timothy M. Kusky Xiaochun Liu Guowei Zhang Guochun Zhao Lu Wang Yuejun Wang 《Gondwana Research》2009,16(2):294
The western Dabie orogen (also known as the Hong'an block) forms the western part of the Dabie–Sulu HP–UHP belt, central China. Rocks of this orogen have been subjected to pervasive ductile deformation, and include numerous quartz schists and felsic mylonites cropping out in ductile shear zones. Quartz textures in these mylonites contain important clues for understanding the movement sense of late-collisional extrusion and exhumation of high-pressure–ultrahigh-pressure (HP–UHP) rocks from the lower crustal level to the upper crustal level during Middle Triassic and Early Jurassic. The orientation and distribution of quartz crystallographic axes were used to confirm the regional shear sense across the orogen. The asymmetry of c-axis patterns consistently indicates top-to-the-southeast thrusting across the orogen in early structural stages. Later stages of deformation show different senses of movement in northern and southern parts of the orogen, with top-to-the-northwest sinistral shearing recorded in rocks north of the Xinxian HP–UHP eclogite-facies belt, and top-to-the-southeast dextral shearing south of the same unit.Based on our study on quartz c-axis fabrics and marco- to micro-scale structures, simultaneous southeastward shearing within a large part of the orogen and normal faulting north of the Xinxian HP–UHP unit is explained by upward extrusion in early stages of deformation. The extrusion process has been attributed to syn- and late-collisional processes, accounting for some earlier deformation in the western Dabie orogen such as metamorphic sequences around the core of the Xinxian HP–UHP eclogite-facies unit. Much higher pressure of deformation is also indicated in the aligned glaucophane and omphacite from blueschist and eclogite in the field. An orogen-parallel eastward extrusion of the Xinxian HP–UHP eclogite-facies unit, however, occurred diachronously in later stages of deformation. Therefore, a tectonic model combining an early upward extrusion with a later eastward extrusion is presented. Two different stages and types of extrusion for exhumation of HP–UHP rocks are suitable to all of east central China. Geochronological data shows that the first, upward extrusion occurred during Middle Triassic, the second, eastward extrusion occurred during Late Triassic to Early Jurassic. These two extrusions are correlative with two stages of rapid exhumation of the Dabie HP–UHP rocks, respectively. These two-stage late-collisional (Middle Triassic to Early Jurassic) extrusion events bridge the gap between syn-collisional (Early to Middle Triassic) vertical extrusion and post-collisional (Cretaceous) eastward-directed lateral escape and provide vital clues to understanding the more detailed processes of exhumation of HP–UHP rocks. 相似文献
7.
The Central India Tectonic Zone (CITZ) is a prominent divide and a major suture zone between the North Indian and South Indian crustal blocks. The resistive upper crust as modeled in the magnetotelluric data from CITZ suggests a dominant tonalite–trdondhjemite–granodiorite composition associated with an accretionary complex characterized by mainly felsic rock components. The highly conductive bodies in this zone might represent mafic/ultramafic-layered intrusives derived from a deeper reservoir of underplated basaltic magma related to the formation of the Cretaceous Deccan flood basalts. The uniformly thick mafic lower crust below the cratons on both sides of the suture is interpreted as the accreted remnants of Archaean and Paleoproterozoic subducted slabs. We redefine the nature of deep faults traversing the CITZ, which were described as steep and penetrating the Moho by previous workers, and classify them as listric faults with gentle dips at depth.Seismic reflection data from the eastern side of the suture suggest a northwestward subduction of the Bhandara Craton. Reflection data from the central part of the CITZ show northerly dip in the southern part suggesting northward subduction of the Dharwar Craton. However, an opposite trend is observed in the northern part of the suture with a southward dip of the Bundelkhand craton. Based on these features, and in conjunction with existing magnetotelluric models, we propose a double-sided subduction history along the CITZ. This would be similar to the ongoing subduction–accretion process in the western Pacific region, which possibly led to the development of paired collision-type and Pacific-type orogens. One important feature is the domal structure along the central part of the suture with a thick felsic crust occurring between mafic and intermediate crust. The high resistivity felsic domain suggests underplated sediments/felsic crust that would have caused the doming. Our model also accounts for the extrusion of regional metamorphic belts at the orogenic core, and the occurrence of high pressure–ultrahigh-temperature paired metamorphic belts within the suture. 相似文献
8.
鄂尔多斯块体西缘及西南缘深部电性结构与该区地质构造的关系 总被引：6，自引：0，他引：6
对在地理位置上具有一定代表性的鄂尔多斯块体西缘及西南缘的３ 条大地电磁剖面进行了分析。盐池—阿拉善左旗剖面：整条剖面上均有壳内低阻层和上地幔低阻层分布,低阻层在银川断陷盆地上隆。定边—景泰剖面：壳内低阻层仅出现在弧形断裂带区,但上地幔低阻层在整个剖面上都有分布。在弧形断裂带区上地幔低阻层埋藏深度加大,但并不上隆,这与北面银川断陷盆地的上地幔上隆形成反照。分析认为,银川断陷盆地属于拉张性质,而弧形断裂带区属于挤压性质,由于均衡调整作用,造成了两者上地幔结构的反差。成县—西吉剖面：以天水太京测点为界,其南、北两段的电性结构差异较大,这为划分南、北两个地质单元提供了深部结构上的依据 相似文献
9.
Wide-open V-shaped conjugate strike-slip faults in Asia are typically related to extrusion tectonics. However, the tectonic model based on the slip-line theory of plasticity has some critical problems associated with it. The conjugate sets of slip-lines in plane deformation, according to the theory of plasticity should be normal to each another but, in reality, the angles between the conjugate strike-slip faults, which are regarded as slip-lines in extrusion tectonics in the eastern Mediterranean, Tibet-middle Asia, China and the Indochina Peninsular regions, are always more than 90° (on average 110°) in the direction of contraction. Another problem is that the slip-line theory fails to explain how, in some cases, e.g., in the Anatolian area in the eastern Mediterranean, the extrusion rate is much higher than the indent rate. The two major problems are easy to solve in terms of the Maximum-Effective-Moment (MEM) Criterion that predicts that orientations of the shear zones are theoretically at an angle of 54.7° and practically at angles of 55°±10° with the σ1- or contractional direction. The orientations of the strike-slip faults that accommodate extrusion tectonics are, therefore, fundamentally controlled by the MEM Criterion. When extrusion is along the MEM-orientations, the extruding rate is normally higher than the indenting rate. 相似文献
10.
Southern India occupies a central position in the Late Neoproterozoic–Cambrian Gondwana supercontinent assembly. The Proterozoic mosaic of southern India comprises a collage of crustal blocks dissected by Late Neoproterozoic–Cambrian crust-scale shear/suture zones. Among these, the Palghat–Cauvery Suture Zone (PCSZ) has been identified as the trace of the Cambrian suture representing Mozambique Ocean closure during the final phase of amalgamation of the Gondwana supercontinent. Here we propose a model involving Pacific-type orogeny to explain the Neoproterozoic evolution of southern India and its final amalgamation within the Gondwana assembly. Our model envisages an early rifting stage which gave birth to the Mozambique Ocean, followed by the initiation of southward subduction of the oceanic plate beneath a thick tectosphere-bearing Archean Dharwar Craton. Slices of the ocean floor carrying dunite–pyroxenite–gabbro sequence intruded by mafic dykes representing a probable ophiolite suite and invaded by plagiogranite are exposed at Manamedu along the southern part the PCSZ. Evidence for the southward subduction and subsequent northward extrusion are preserved in the PCSZ where the orogenic core carries high-pressure and ultrahigh-temperature metamorphic assemblages with ages corresponding to the Cambrian collisional orogeny. Typical eclogites facies rocks with garnet + omphacite + quartz and diagnostic ultrahigh-temperature assemblages with sapphirine + quartz, spinel + quartz and high alumina orthopyroxene + sillimanite + quartz indicate extreme metamorphism during the subduction–collision process. Eclogites and UHT granulites in the orogenic core define P–T maxima of 1000 °C and up to 20 kbar. The close association of eclogites with ultramafic rocks having abyssal signatures together with linear belts of iron formation and metachert in several localities within the PCSZ probably represents subduction–accretion setting. Fragments of the mantle wedge were brought up through extrusion tectonics within the orogenic core, which now occur as suprasubduction zone/arc assemblages including chromitites, highly depleted dunites, and pyroxene bearing ultramafic assemblages around Salem. Extensive CO2 metasomatism of the ultramafic units generated magnesite deposits such as those around Salem. High temperature ocean floor hydrothermal alteration is also indicated by the occurrence of diopsidite dykes with calcite veining. Thermal metamorphism from the top resulted in the dehydration of the passive margin sediments trapped beneath the orogenic core, releasing copious hydrous fluids which moved upward and caused widespread hydration, as commonly preserved in the Barrovian amphibolite facies units in the PCSZ. The crustal flower structure mapped from PCSZ supports the extrusion model, and the large scale north verging thrusts towards the north of the orogenic core may represent a fold-thrust belt. Towards the south of the PCSZ is the Madurai Block where evidence for extensive magmatism occurs, represented by a number of granitic plutons and igneous charnockite massifs of possible tonalite–trondhjemite–granodiorite (TTG) setting, with ages ranging from ca. 750–560 Ma suggesting a long-lived Neoproterozoic magmatic arc within a > 200 km wide belt. All these magmatic units were subsequently metamorphosed, when the Pacific-type orogeny switched over to collision-type in the Cambrian during the final phase of assembly of the Gondwana supercontinent. One of the most notable aspects is the occurrence of arc magmatic rocks together with high P/T rocks, representing the deeply eroded zone of subduction. The juxtaposition of these contrasting rock units may suggest the root of an evolved Andean-type margin, as in many arc environments the roots of the arc comprise ultramafic/mafic cumulates and the felsic rocks represent the core of the arc. The final phase of the orogeny witnessed the closure of an extensive ocean — the Mozambique Ocean — and the collisional assembly of continental fragments within the Gondwana supercontinent amalgam. The tectonic history of southern India represents a progressive sequence from Pacific-type to collision-type orogeny which finally gave rise to a Himalayan-type Cambrian orogen with characteristic magmatic, metasomatic and metamorphic factories operating in subduction–collision setting. 相似文献