康古尔塔格缝合带的变形机制     

王洋  陈练武 《地球科学与环境学报》1996,(4)

北天山东段康古尔塔格带是晚古生代塔里木板块和准噶尔板块碰撞的结果。它是一条复杂的、强烈的高应变带．并具有独特的变形机制、应变序列以及构造变形。本文运用构造－地层研究方法对该碰撞带的构造特征加以分析和研究。  相似文献   

STUDY ON GIS FOR YIELD ESTIMATION BY REMOTE SENSING IN JILIN MAIZE BELT     

Liu Xiangnan  Huang Fang  Zhou Zhanao 《中国地理科学(英文版)》1996,6(4):351-358

ＳＴＵＤＹ　ＯＮ　ＧＩＳ　ＦＯＲ　ＹＩＥＬＤ　ＥＳＴＩＭＡＴＩＯＮ　ＢＹ　ＲＥＭＯＴＥ　ＳＥＮＳＩＮＧ　ＩＮ　ＪＩＬＩＮ　ＭＡＩＺＥ　ＢＥＬＴＳＴＵＤＹＯＮＧＩＳＦＯＲＹＩＥＬＤＥＳＴＩＭＡＴＩＯＮＢＹＲＥＭＯＴＥＳＥＮＳＩＮＧＩＮＪＩＬＩＮＭＡＩＺ...  相似文献   

High-pressure eclogites in northern Jiangsu – southern Shandong province, eastern China     

MASAKI ENAMI  QUIJA ZANG  YUJUN YIN 《Journal of Metamorphic Geology》1993,11(4):589-603

Abstract Eclogites are distributed for more than 500 km along a major tectonic boundary between the Sino-Korean and Yangtze cratons in central and eastern China. These eclogites usually have high-P assemblages including omphacite + kyanite and/or coesite (or its pseudomorph), and form a high-P eclogite terrane. They occur as isolated lenses or blocks 10 cm to 300 m long in gneisses (Type I), serpentinized garnet peridotites (Type II) and marbles (Type III). Type I eclogites were formed by prograde metamorphism, and their primary metamorphic mineral assemblage consists mainly of garnet [pyrope (Prp) = 15–40 mol%], omphacite [jadeite (Jd) = 34–64 mol%], pargasitic amphibole, kyanite, phengitic muscovite, zoisite, an SiO₂ phase, apatite, rutile and zircon. Type II eclogites characteristically contain no SiO₂ phase, and are divided into prograde eclogites and mantle-derived eclogites. The prograde eclogites of Type II are petrographically similar to Type I eclogites. The mantle-derived eclogites have high MgO/(FeO + Fe₂O₃) and Cr₂O₃ compositions in bulk rock and minerals, and consist mainly of pyrope-rich garnet (Prp = 48–60 mol%), sodic augite (Jd = 10–27 mol%) and rutile. Type III eclogites have an unusual mineral assemblage of grossular-rich (Grs = 57 mol%) garnet + omphacite (Jd = 30–34 mol%) + pargasite + rutile. Pargasitic and taramitic amphiboles, calcic plagioclase (An₆₈), epidote, zoisite, K-feldspar and paragonite occur as inclusions in garnet and omphacite in the prograde eclogites. This suggests that the prograde eclogites were formed by recrystallization of epidote amphibolite and/or amphibolite facies rocks with near-isothermal compression reflecting crustal thickening during continent–continent collision of late Proterozoic age. Equilibrium conditions of the prograde eclogites range from P > 26 kbar and T= 500–750°C in the western part to P > 28 kbar and T= 810–880°C in the eastern part of the high-P eclogite terrane. The prograde eclogites in the eastern part are considered to have been derived from a deeper position than those in the western part. Subsequent reactions, manifested by (1) narrow rims of sodic plagioclase or paragonite on kyanite and (2) symplectites between omphacite and quartz are interpreted as an effect of near-isothermal decompression during the retrograde stage. The conditions at which symplectites re-equilibrated tend to increase from west (P < 10 kbar and T < 580°C) to east (P > 9 kbar and T > 680°C). Equilibrium temperatures of Type II mantle-derived eclogites and Type III eclogite are 730–750°C and 680°C, respectively.  相似文献   

Fast iterative solution of large undrained soil‐structure interaction problems     

Kok‐Kwang Phoon  Swee‐Huat Chan  Kim‐Chuan Toh  Fook‐Hou Lee 《国际地质力学数值与分析法杂志》2003,27(3):159-181

In view of rapid developments in iterative solvers, it is timely to re‐examine the merits of using mixed formulation for incompressible problems. This paper presents extensive numerical studies to compare the accuracy of undrained solutions resulting from the standard displacement formulation with a penalty term and the two‐field mixed formulation. The standard displacement and two‐field mixed formulations are solved using both direct and iterative approaches to assess if it is cost‐effective to achieve more accurate solutions. Numerical studies of a simple footing problem show that the mixed formulation is able to solve the incompressible problem ‘exactly’, does not create pressure and stress instabilities, and obviate the need for an ad hoc penalty number. In addition, for large‐scale problems where it is not possible to perform direct solutions entirely within available random access memory, it turns out that the larger system of equations from mixed formulation also can be solved much more efficiently than the smaller system of equations arising from standard formulation by using the symmetric quasi‐minimal residual (SQMR) method with the generalized Jacobi (GJ) preconditioner. Iterative solution by SQMR with GJ preconditioning also is more elegant, faster, and more accurate than the popular Uzawa method. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Statistical analysis of sand grain/bed collision process recorded by high-speed digital camera   总被引：1，自引：0，他引：1  

DAWEI WANG  YUAN WANG  BIN YANG  WEI ZHANG† 《Sedimentology》2008,55(2):461-470

A high‐speed digital camera was employed to record the sand grain/bed collision process. With image processing and a statistical method, a series of parameters of the collision process were obtained. The results show that the collision process of a grain with rebounding can be represented by two parameters: the kinetic energy restitution coefficient and the collision angle. Both parameters satisfy a normal distribution, and they are dependent on one another. With an increase of the collision angle, the distribution of the kinetic energy restitution gradually reduces from a broad to a narrow range with low values. The percentage of vertical velocity restitution coefficients greater than 1 can reach 70% or more, which ensures that the settling time of the sand grains in the air increases and that they receive more energy from the air to progress the saltation movement.  相似文献   

Revised age of proximal deposits in the Zagros foreland basin and implications for Cenozoic evolution of the High Zagros     

Mohammad D. Fakhari  Gary J. Axen  Brian K. Horton  Jamshid Hassanzadeh  Abdolhossein Amini 《Tectonophysics》2008,451(1-4):170-185

The regionally extensive, coarse-grained Bakhtiyari Formation represents the youngest synorogenic fill in the Zagros foreland basin of Iran. The Bakhtiyari is present throughout the Zagros fold-thrust belt and consists of conglomerate with subordinate sandstone and marl. The formation is up to 3000 m thick and was deposited in foredeep and wedge-top depocenters flanked by fold-thrust structures. Although the Bakhtiyari concordantly overlies Miocene deposits in foreland regions, an angular unconformity above tilted Paleozoic to Miocene rocks is expressed in the hinterland (High Zagros).

The Bakhtiyari Formation has been widely considered to be a regional sheet of Pliocene–Pleistocene conglomerate deposited during and after major late Miocene–Pliocene shortening. It is further believed that rapid fold growth and Bakhtiyari deposition commenced simultaneously across the fold-thrust belt, with limited migration from hinterland (NE) to foreland (SW). Thus, the Bakhtiyari is generally interpreted as an unmistakable time indicator for shortening and surface uplift across the Zagros. However, new structural and stratigraphic data show that the most-proximal Bakhtiyari exposures, in the High Zagros south of Shahr-kord, were deposited during the early Miocene and probably Oligocene. In this locality, a coarse-grained Bakhtiyari succession several hundred meters thick contains gray marl, limestone, and sandstone with diagnostic marine pelecypod, gastropod, coral, and coralline algae fossils. Foraminiferal and palynological species indicate deposition during early Miocene time. However, the lower Miocene marine interval lies in angular unconformity above ~ 150 m of Bakhtiyari conglomerate that, in turn, unconformably caps an Oligocene marine sequence. These relationships attest to syndepositional deformation and suggest that the oldest Bakhtiyari conglomerate could be Oligocene in age.

The new age information constrains the timing of initial foreland-basin development and proximal Bakhtiyari deposition in the Zagros hinterland. These findings reveal that structural evolution of the High Zagros was underway by early Miocene and probably Oligocene time, earlier than commonly envisioned. The age of the Bakhtiyari Formation in the High Zagros contrasts significantly with the Pliocene–Quaternary Bakhtiyari deposits near the modern deformation front, suggesting a long-term (> 20 Myr) advance of deformation toward the foreland.  相似文献   

Petrology and U-Pb Zircon Geochronology of Amphibole-rich Cumulates with Sanukitic Affinity from Husky Ridge (Northern Victoria Land, Antarctica): Insights into the Role of Amphibole in the Petrogenesis of Subduction-related Magmas     

Tiepolo  Massimo; Tribuzio  Riccardo 《Journal of Petrology》2008,49(5):937-970

A microanalytical trace element and geochronological study wascarried out on mafic amphibole-rich cumulates (quartz diorites)cropping out in northern Victoria Land (Antarctica). Associatedtonalites and basement rocks were also investigated. Rock texturesand major and trace element mineral compositions reveal thepresence in quartz diorites of two mineral assemblages: (1)clinopyroxene-I + brown amphibole ± dark mica; (2) clinopyroxene-II+ green amphibole + plagioclase + quartz. Both mineral assemblagescontain mafic phases with elevated Mg-number, but their traceelement signatures differ significantly. In situ U–Pbzircon geochronology was carried out to support petrogeneticand geological interpretations. Quartz diorites were emplacedin the mid-crust probably at 516 ± 3 Ma. Parental meltsof quartz diorites were computed by applying solid/liquid partitioncoefficients. The melt in equilibrium with the first mineralassemblage (melt-I) is extremely depleted in heavy rare earthelements (HREE), Y, Ti, Zr and Hf (at about 0·2 timesnormal mid-ocean ridge basalt) and enriched in B, Th, U, thelarge ion lithophile elements and light REE (LREE). It sharesmany similarities with sanukitic melts (e.g. Setouchi andesites),which originated by equilibration of subduction-derived sedimentmelts with a refractory mantle. The melt in equilibrium withthe second mineral assemblage (melt-II) is characterized bya steep LREE enrichment (La_N/Yb_N up to 39), a U-shaped HREEpattern and low Ti, which is depleted relative to HREE. Thetrace element signature of melt-II can be acquired through amphibolecrystallization starting from a sanukitic melt similar to melt-I,probably in a deeper magma chamber. Our results allow us toconstrain that melts from the subducted slab were produced ona regional scale, in accordance with literature data, belowa large sector of the east Gondwana margin during the mid-Cambrian.Implications for the role of amphibole in petrogenesis of subduction-relatedmagmas are also discussed. KEY WORDS: amphibole; sanukite; high-Mg andesites; Ross Orogeny; Antarctica  相似文献   

引水工程秦巴段隧洞地应力模拟及工程地质问题     

李东林  吴树仁  韩金良  刘景儒 《地质与勘探》2008,44(5):81-86

利用Ansys有限元软件对三峡引水工程秦巴段线路不同深度、不同截面形态隧洞围岩的应力重分布情况进行模拟计算,得到圆形隧洞、城门形隧洞和马蹄形隧洞围岩的应力数值和等值线图.利用库仑一纳维尔强度准则,对花岗岩区及灰岩区隧洞围岩的剪切破坏进行分析;利用三种岩爆应力判别指标,对岩爆进行初步预测;进而对不同深度、不同截面形态的隧洞围岩的稳定性进行分析;最后对引水工程隧洞设计中截面形态的选择给出了初步建议.  相似文献   

SO4^2-改性铁铝复合层柱粘土的制备及其催化性能研究     

于少明  郝文正  翟林峰  陆亚玲  陈天虎  史铁钧 《矿物学报》2008,28(3)

由共聚法制得的铁铝复合交联剂交换钠基蒙脱石层间的水合钠离子,再经SO42-改性处理制备了铁铝复合层柱粘土固体超强酸催化剂.利用xRD、FT-IR和BET法对催化剂的结构进行了表征.以乙酸正丁酯的合成反应为探针反应对催化剂的活性进行了测试.通过正交实验确定了铁铝复合交联粘土SO42-改性最佳工艺条件.研究了催化剂对探针反应的选择性及重复使用情况.结果表明:在由实验确定的最佳改性工艺条件下,乙酸的转化率达92.2%,反应中无副产物产生,催化剂具有较好的重复使用性能.  相似文献   

试论东海陆架盆地的基底构造演化和盆地形成机制   总被引：4，自引：0，他引：4  

李培廉  朱平 《海洋地质与第四纪地质》1992,(3)

本文主要根据东海陆架盆地和周边的地质、地球物理资料,分析盆地的基底岩性特征、结构特征。认为东海陆架盆地的基底除元古界片麻岩外,还分布有一定范围的中生界及古生界。基底构造特征是纵向上多层次,横向上不均一,南北有别,东西分带。构造演化上经历了张、合、压、扭等复杂过程。  相似文献