The organic geochemical methods of hydrocarbon prospecting involve the characterization of sedimentary organic matter in terms of its abundance, source and thermal maturity, which are essential prerequisites for a hydrocarbon source rock. In the present study, evaluation of organic matter in the outcrop shale samples from the Semri and Kaimur Groups of Vindhyan basin was carried out using Rock Eval pyrolysis. Also, the adsorbed low molecular weight hydrocarbons, methane, ethane, propane and butane, were investigated in the near surface soils to infer the generation of hydrocarbons in the Vindhyan basin. The Total Organic Carbon (TOC) content in shales ranges between 0.04% and 1.43%. The S1 (thermally liberated free hydrocarbons) values range between 0.01–0.09 mgHC/gRock (milligram hydrocarbon per gram of rock sample), whereas the S2 (hydrocarbons from cracking of kerogen) show the values between 0.01 and 0.14 mgHC/gRock. Based on the Tmax (temperature at highest yield of S2) and the hydrogen index (HI) correlations, the organic matter is characterized by Type III kerogen. The adsorbed soil gas, CH4 (C1), C2H6 (C2), C3H8 (C3) and nC4H10, (nC4), concentrations measured in the soil samples from the eastern part of Vindhyan basin (Son Valley) vary from 0 to 186 ppb, 0 to 4 ppb, 0 to 5 ppb, and 0 to 1 ppb, respectively. The stable carbon isotope values for the desorbed methane (δ13C1) and ethane (δ13C2) range between −45.7‰ to −25.2‰ and −35.3‰ to −20.19‰ (VPDB), respectively suggesting a thermogenic source for these hydrocarbons. High concentrations of thermogenic hydrocarbons are characteristic of areas around Sagar, Narsinghpur, Katni and Satna in the Son Valley. The light hydrocarbon concentrations (C1–C4) in near surface soils of the western Vindhyan basin around Chambal Valley have been reported to vary between 1–2547 ppb, 1–558 ppb, 1–181 ppb, 1–37 ppb and 1–32 ppb, respectively with high concentrations around Baran-Jhalawar-Bhanpur-Garot regions (Kumar et al., 2006). The light gaseous hydrocarbon anomalies are coincident with the wrench faults (Kota – Dholpur, Ratlam – Shivpuri, Kannod – Damoh, Son Banspur – Rewa wrench) in the Vindhyan basin, which may provide conducive pathways for the migration of the hydrocarbons towards the near surface soils. 相似文献
Weathering of heavy metal enriched black shales may be one of the most important sources of environmental contamination in areas where black shales are distributed. Heavy metal release during weathering of the Lower Cambrian Black Shales (LCBS) in western Hunan, China, was investigated using traditional geochemical methods and the ICP-MS analytical technique. Concentrations of 16 heavy metals, 8 trace elements and P were measured for samples from selected weathering profiles at the Taiping vanadium ore mine (TP), the Matian phosphorous ore mine (MT), and Taojiang stone-coal mine (TJ). The results show that the bedrock at these three profiles is enriched with Sc, V, Cr, Co, Ni, Cu, Zn, Pb, Th, U, Mo, Cd, Sb, Tl, and P. Based on mass-balance calculation, the percentages of heavy metals released (in % loss) relative to immobile element Nb were estimated. The results show significant rates of release during weathering of: V, Cr, Co, Ni, Cu, Zn, U, Mo, Cd, Sn, Sb, and Tl for the TP profile; Sc, Cr, Mn, Co, Ni, Cu, Zn, Pb, Th, Cd, and Sn for the MT profile; and Sc, Mn, Co, Ni, Zn, Th, Cd, Sn, and Tl for the TJ profile. Among these heavy metals, Co, Ni, Zn, Cd, and Sn show very similar features of release from each of the three weathering profiles. The heavy metals released during weathering may affect the environment (especially topsoil and surface waters) and are possibly related to an observed high incidence of endemic diseases in the area. 相似文献
Lower Jurassic shales of the Shemshak Formation of Kerman Province, Central Iran, were analyzed for major and selected trace elements to infer their provenance, intensity of palaeoweathering of the source rocks and tectonic setting. Plots of shales on Al2O3 wt.% versus TiO2 wt.% diagram and Cr (ppm) versus Ni (ppm) diagram indicate that acidic (granitic) rocks constitute the source rocks in the provenance. Average CIA, PIA and CIW values (84%, 92%, 93%, respectively) imply intense weathering of the source material. Plots of shales on bivariate discriminant function diagram reveal an active continental margin setting for the provenance. The inferred tectonic setting for the Lower Jurassic shales of the Shemshak Formation of Kerman Province is in agreement with the tectonic evolutionary history of the Central Iran during the Jurassic period. 相似文献
Inquiry into the dissolution kinetics of naturally occurring geologic materials, rather than individual mineral species, has been relatively neglected. This is especially true of surface processes, the realm of surface water hydrology and geomorphology. This paper focuses attention at a laboratory study of the rate of such complex reactions. Functions defining the dissolution rates of saline (0.1–20 per cent salt content) Mancos Shale-associated alluvium in distilled water follow varying patterns. Dissolution is characterized by an initial (<5 min) high rate constant, by a following phase (20 min-57 h) where rates are reduced drastically, and by a final period of encroachment to equilibrium. Initial dissolution rates increase with increase in salt content and sediment: water ratio. The time necessary to approach equilibrium is, however, found to be directly proportional to the sediment; water ratio. The concentration of Na+, Mg2+, Ca2+, SC2?4 and HCO?3, and the relative abundance of Ca2+ and HCO?3 increase continuously with contact time, indicating that the hydrated sodium and magnesium sulphate minerals provide most of the initial solutes, though not necessarily most of the total solute bulk. The results obtained in this study indicate that the high initial dissolution rate of soluble minerals from alluvium, and particularly from shales in contact with aqueous solutions, is too short-lived to account for most of the solutes occurring in heavily sediment-laden surface flow. Excluding input from slower, usually supersaturated subsurface flow, dissolution from sediment in transport should be a major source of solutes in originally undersaturated and kinetically unequilibrated surface water in semiarid and arid regions. 相似文献
The Lagonegro Units are a part of the southern Apennines orogenic wedge. The age of the Lagonegro successions ranges from lower–middle Triassic to Oligo-Miocene. During late Cretaceous and Oligocene the deposition of calcareous-clastic sediments occurred interbedded with shales (Flysch Rosso Fm). During Oligocene and early Miocene, in the Mediterranean area, an important variation of the tectonic regime occurred, and siliciclastic sediments of the Numidian Basin unconformably lay on the Meso-Cenozoic units of the Lagonegro Basin. In the Lucanian Apennine, the Aquitanian–Langhian Numidian Flysch Fm overlies the Flysch rosso Fm. The shales of the Flysch rosso Fm have a peculiar geochemical fingerprint relative to typical shales of post-Archean age. The abundance of Ni and Cr is significantly higher and the HREE chondrite-normalized patterns are steep with a (Gd/Yb)ch>2. A supply of material from the African Archean terranes could be the cause. The palaeo-weathering indices record changes at the source, reflecting variations in the tectonic regime. The oldest samples are derived from an environment in which steady-state weathering conditions prevailed, whereas the youngest samples are related to non-steady-state weathering conditions. This difference could record deformational events that affected the Mediterranean area during the Oligocene and early Miocene. The sample at the top of the studied log has very high silica content and an abundant coarse grain-sized fraction. This suggests that this sample belongs to the Numidian Flysch Fm. The geochemical proxies of this sample are different from those associated with samples from the Flysch rosso Fm, indicating that the source-area of the Numidian Flysch Fm did not include the Archean terranes. 相似文献
The possibility of using crushed shales as landfill liners is investigated in this study. Two types of shales were studied by performing the following laboratory tests: hydraulic conductivity, compaction, swelling, consolidation, X-ray diffraction (XRD), scanning electron microscope (SEM) and chemical analysis. For both compacted shales, the hydraulic conductivity was in order of 10−7 cm/s or less which satisfies the specifications for landfill liners. The results of XRD and SEM support the low values of the hydraulic conductivity. Because of the dominant presence of low-activity kaolinite, there was no significant change in the hydraulic conductivity when the compacted shales are exposed to calcium chloride solution. The compressibility of the compacted clay was low and no serious post-construction settlement is expected. The shear strength of the compacted shales was within the usual expected range for earthen liners and, therefore, should pose no challenges with respect to shear strength. The crushed shales also satisfy the other criteria related to Atterberg limits and grain size. 相似文献
A better understanding of genesis and palaeoenvironmental setting of the Scisti silicei Formation (Lagonegro units, southern Italy) was achieved by means of geochemical analysis integrated with new stratigraphic information. Data show that major and trace element geochemistry of ancient clay-rich beds and banded cherts add new insights into the Mesozoic evolution of the Lagonegro basin. Sedimentary contributions to Jurassic shales sampled during this study were mainly derived from two major sources: (i) a dominant terrigenous fine-grained component, having affinity with average upper continental crust that had not undergone intense weathering and (ii) biogenic siliceous material. The latter component occurs in clay-rich layers from the “basal member” of the Scisti silicei Formation.
Composition varies up section and accounts for changes in the detrital supply due to bathymetric oscillations. The compositional variations from the basal to the overlying member are consistent with a distal source passing in time to a more “proximal” source, as indicated by sharp changes in the concentrations of detrital elements (Ti, Zr and Nb). It is likely that increased detrital input occurred through turbidity current deposition. Finally, the chemical features of the clay-rich layers from the upper cherty portion of the studied succession imply a progressive deepening of the basin.
The lack of any mafic and hydrothermal contributions in the Jurassic shales as well as the continental nature of detrital input suggests that the Lagonegro basin was located between two carbonate platforms, in accordance with the classical restoration of the African–Apulian palaeomargin. Thus, the basin acted as a preferential sink connected to the African cratonic areas through a southern entry point. 相似文献