排序方式： 共有33条查询结果，搜索用时 31 毫秒
1.
Kinematic analysis of sinistral cataclastic shear zones along the northern margin of the Mino Belt, central Japan 总被引：1，自引：0，他引：1
In this paper, cataclastic shear zones along the northern margin of the Mino Belt, central Japan are described, and the significance of the shearing in the tectonic evolution of SW Japan is examined. The Mino Belt in SW Japan is composed of accretionary complexes of Jurassic to Early Cretaceous age. Field investigation revealed that remarkable cataclastic shear zones trending east to northeast run along the northern margin of the Mino Belt. Closely spaced cleavage is developed in these shear zones. Lineation on the cleavage plunges at shallow to moderate angles. Deformation structures (e.g. composite planar fabric and asymmetric structure of clasts) in the sheared rocks clearly indicate a sinistral sense of shear. The shearing ceased by latest Cretaceous time, because the sheared rocks are overlain by unsheared Upper Cretaceous volcanic rocks. The sinistral shearing may be closely related to Cretaceous sinistral movement along the eastern margin of Asia. Sinistral shearing along the northern margin of the Mino Belt can be considered as a key for re-examining the tectonic development of SW Japan. 相似文献
2.
肥东花岗质岩脉的变形及年代学特征对郯庐断裂带早白垩世构造活动的指示 总被引：1，自引：1，他引：0
郯庐断裂带肥东段位于大别造山带与苏鲁造山带之间。在肥东段西韦采石场内发育了大规模的北北东向左行走滑韧性剪切带和一条低角度的韧性滑脱正断层。走滑韧性剪切带为郯庐断裂带走滑活动的产物,低角度滑脱正断层则代表了伸展背景下的构造活动。低角度滑脱正断层上、下盘发育未变形和变形的岩脉,走滑韧性剪切带内外也发育有受剪切带活动而变形的岩脉。对采石场内岩脉的构造和同位素年代学研究表明,低角度韧性滑脱正断层在129~126Ma之间发生过剪切活动,走滑韧性剪切带的活动时间在125Ma之后。综合研究认为,郯庐断裂带的伸展活动可能开始于早白垩世早期(130Ma),但在早白垩世并非一直处于伸展活动之中,125Ma之后的左行走滑活动很可能发生在早白垩世的晚期。 相似文献
3.
Xue-jie Li Zhe Wang Yong-jian Yao Hong-fang Gao Song Zhu Zi-ying Xu 《China Geology》2023,6(1):154-167
The existing genetic models of the South China Sea(SCS) include an extrusion model of the Indochina Peninsula, a back-arc extension model, and a subduction and dragging model of the Proto-South China Sea(PSCS). However, none of these models has been universally accepted because they do not fully match a large number of geological phenomena and facts. By examining the regional tectonics and integrating them with measured data for the SCS, in this study, a back-arc spreading-sinistral shear model ... 相似文献
4.
There are 18 gullies displaying sinistral contortions to different degrees along the western terminal segment about 10 km long of the active Daqingshan piedmont fault near the Donghe District, Baotou City. The contortion amount of gullies ranges from 20 m to 300 m. The contortion and length of the gullies are in direct proportion. The relation between piedmont terraces and gullies indicates that the gullies with upper reaches of about 1 ～ 5 km long and those smaller than one kilometer were formed at the end of Late Pleistocene and Holocene.Meanwhile, sandy gravel layer of alluvial-proluvial sediment on the upthrown wall is directly in contact with yellow clayey sand of the downthrown wall. During the Holocene, the sinistral strike-slip rate along the western terminal segment of the active Daqingshan piedmont fault reached 5 mm/a from age data of dislocated sediments. The evolutional mechanism of the active Daqingshan piedmont fault is also discussed in the paper. 相似文献
5.
6.
The NE-trending Bayanwula Shan–Lang Shan is an important tectonic belt lying between the North China Plate (NCP) to the east and the Alxa block to the west. An understanding of its nature and the timing of deformation are essential to understand the relationship between the NCP and the Alxa block. Two phases of ductile deformation have been observed in this belt. Large-scale top-to-the-west ductile thrusting characterized the early deformation in the Bayanwula Shan–Lang Shan. Nearly east–west trending quartz stretching lineations and lineations formed by amphibole and biotite are well developed. Different types of sheath and oblique folds with east–west trending fold hinges are also developed in the region. The shear strain of this ductile thrust is up to 17. The ductile deformation may have resulted from the top-to-the-west thrusting of the northern part of the NCP over the Alxa block, and may have occurred ca. 351 Ma (biotite 40Ar/39Ar age). Later ductile deformation was expressed as NE-trending sinistral shear along the entire Bayanwula Shan–Lang Shan and likely occurred ca. 250 Ma (biotite and muscovite 40Ar/39Ar ages); this shear may have resulted from the collision between the Yangtze and North China plates to the south during the Triassic. Combined with recently obtained detrital zircon U–Pb ages for the area, the ductile deformation events in the eastern Alxa block indicate that the block may not have been part of the NCP, at least before the end of the Devonian. Both blocks were located in the Paleo-Asian Ocean during the Paleozoic and collided or amalgamated with each other at the end of the Devonian. 相似文献
7.
内蒙大青山山前活动断裂带西端左旋走滑现象 总被引：10，自引：0，他引：10
位于大青山山前断裂西端约１０ｋｍ的地段,１８条冲沟不同程度地发生了左旋扭曲,扭曲量２０～３００ｍ不等。冲工度与左旋扭曲量显示了较好的正比关系。从山前台地与冲沟的切割关系可以看到,这些上游长度１～５ｋｍ及小于１ｋｍ的冲沟形成在晚更新世末期及全新世以后,同时冲沟沟口河流冲洪积相砂砾石层直接与山边黄色亚砂土断层接触,断层下降盘地层年龄早于断层上升盘的地层年龄,显示了断层的走滑活动,由断错的地层年代估算,大青山山前活动断裂西端全新世左旋走滑速率达到５ｍｍ／ａ。此外,本文还讨论了了大青山山前活动断裂的演化机制。 相似文献
8.
Data supporting relevant Late Cretaceous–Early Eocene sinistral displacement along the Giudicarie fault zone and a minor Neogene dextral displacement along the Periadriatic lineament are discussed. The pre-Adamello structural belt is present only in the internal Lombardy zone, located W of the Adamello massif. This belt is unknown in the Dolomites and surrounding areas located to the E of the Giudicarie lineament. Upper Cretaceous–Early Eocene thick syntectonic Flysch deposits of Lombardy and Giudicarie are well preserved along the southern and eastern border of the pre-Adamello belt (S-vergent Alpine orogen). Towards the E, in the Dolomites and in the Carnic Alps and external Dinarides, only incomplete remnants of Flysch deposits, Aptian–Albian and Turonian–Maastrichtian in age, are present. They can be considered as equivalent to those of Lombardy and Giudicarie formerly in connection to each other along the N-Giudicarie corridor. To the S, the syntectonic Flysch deposits are laterally replaced by the calcareous red pelagites of the Scaglia Rossa and by the carbonate shelf deposits of the Friuli (to the E) and Bagnolo (to the S) carbonate platforms. The different location in the southern structural accretion of the eastern and western opposite blocks (the Dolomites versus the pre-Adamello belt) can be related to the Cretaceous–Eocene convergence. In this frame, the N-Giudicarie fault has been considered as part of a former transfer zone, which produced the sinistral lateral displacement of the Southern Alps front for an amount of some 50 km. During the Late Eocene to Early Oligocene the transfer zone was mostly sealed by the Paleogene Adamello batholith. Oligocene to Neogene compressional evolution inverted the N-Giudicarie fault into a backthrust of the Austroalpine units over the South-Alpine chain. 相似文献
9.
在大别造山带东端和苏鲁造山带西端,郯庐断裂带存在着同造山期和早白垩世两期左旋走滑韧性剪切带,在张八岭隆起南段迄今为止只发现了早白垩世的走滑剪切带。这些剪切带由若干条小型韧性剪切带组成,带内糜棱岩都具有陡倾的糜棱面理和平缓的矿物拉伸线理。野外构造、显微构造及石英C轴组构皆指示了左旋走滑剪切指向。新生矿物组合和矿物变形行为分析显示大别山东端郯庐早、晚两期剪切带主要形成于中绿片岩相的变质温度环境,张八岭隆起南段剪切带主要形成于高绿片岩相的变质温度环境,苏鲁造山带西端郯庐早、晚两期剪切带则形成于高角闪岩相的变质温度环境。糜棱岩内基质中新生白云母的电子探针分析指示大别山东端和张八岭隆起南段出露的郯庐韧性剪切带形成于低压环境下,而苏鲁造山带西端的郯庐韧性剪切带形成于高压榴辉岩相环境。这些详细的构造研究显示:在华北与华南板块的碰撞造山期郯庐断裂带以左旋走滑构造型式存在,而在早白垩世太平洋构造域中它又再次发生了强烈的左行平移。 相似文献
10.
中国阿尔泰造山带南缘额尔齐斯断裂带的构造变形及意义 总被引：6，自引：4，他引：2
额尔齐斯断裂是中亚造山带中的一条重要深大断裂,对于额尔齐斯断裂运动性质一直有着走滑断层、逆冲断层和压扭性断层等不同看法.本文在中国阿尔泰造山带南缘开展了详细的构造地质学工作,研究结果表明,额尔齐斯断裂及其次级断裂组成额尔齐斯断裂带.额尔齐斯断裂带在中国境内是一条宽约20 ～ 40km,长约400km,经受不同程度构造作用的强应变带,剪切作用影响范围遍布整个中国阿尔泰造山带南缘.额尔齐斯断裂带经历了左行走滑和右行走滑两个阶段.结合前人有关韧性剪切带成因型金矿、同构造岩体侵位与变形关系及对变质岩石40Ar/39Ar年代学研究,本文认为额尔齐斯断裂带的左行走滑构造形成于早二叠世(283～275Ma).早二叠世之后,额尔齐斯断裂带叠加了右行走滑事件,其活动时限可能为晚二叠世(260 ～ 245 Ma),其规模远远小于前期的左行走滑构造.额尔齐斯断裂带走滑活动性质的确定,为二叠纪北疆及整个中亚造山带造山后调整过程中不同的构造方式提供了佐证. 相似文献