Size and shape evolution of pores in a viscoplastic matrix under compression     

M. Berli  M. L. Accorsi  D. Or 《国际地质力学数值与分析法杂志》2006,30(12):1259-1281

The frequent use of soils and earth materials for hydraulic capping and for geo‐environmental waste containment motivated our interest in detailed modelling of changes in size and shape of macro‐pores to establish links between soil mechanical behaviour and concurrent changes in hydraulic and transport properties. The objective of this study was to use finite element analysis (FEA) to test and extend previous analytical solutions proposed by the authors describing deformation of a single macro‐pore embedded in linear viscoplastic soil material subjected to anisotropic remote stress. The FEA enables to consider more complex pore geometries and provides a detailed picture of matrix yield behaviour to explain shortcomings of approximate analytical solutions. Finite element and analytical calculations agreed very well for linear viscous as well as for viscoplastic materials, only limited for the case of isotropic remote stress due to the simplifications of the analytical model related to patterns and onset of matrix‐yielding behaviour. FEA calculations were compared with experimental data obtained from a compaction experiment in which pore deformation within a uniform modelling clay sample was monitored using CAT scanning. FEA predictions based on independently measured material properties and initial pore geometry provided an excellent match with experimentally determined evolution of pore size and shape hence lending credence to the potential use of FEA for more complex pore geometries and eventually connect macro‐pore deformation with hydraulic properties. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine     

ROY M. FRINGS  MAARTEN G. KLEINHANS  STEFAN VOLLMER 《Sedimentology》2008,55(6):1571-1593

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.  相似文献   

Evaluation of coal bed methane potential of coal seams of Sawang Colliery,Jharkhand, India     

Anil M. Pophare  Vinod A. Mendhe  A. Varade 《Journal of Earth System Science》2008,117(2):121-132

The coal seams of Sawang Colliery, East Bokaro Coalfields are bituminous to sub-bituminous in nature and categorized as high gaseous seams (degree II to degree III level). These seams have the potential for coal bed methane (CBM) and their maturity increases with increasing depth, as a result of enhanced pressure-temperature conditions in the underground. The vitrinite maceral group composition of the investigated coal seams ranges from 62.50–83.15%, whereas the inertinite content varies from 14.93–36.81%. The liptinite content varies from 0.66% to 3.09%. The maximum micro-pores are confined within the vitrinite group of macerals. The coal seams exhibit vitrinite reflectance values (Ro% calculated) from 0.94% (sample CG-97) to 1.21% (sample CG-119). Proximate analyses of the investigated coal samples reveal that the moisture content (M%) ranges from 1.28% to 2.98%, whereas, volatile matter (VM%) content is placed in the range of 27.01% to 33.86%. The ash content (A%) ranges from 10.92% to 30.01%. Fixed carbon (FC%) content varies from 41.53% to 55.93%. Fuel ratio variation shows a restricted range from 1.53 to 1.97. All the coal samples were found to be strongly caking and forming coke buttons. The present study is based on the adsorption isotherm experiments carried out under controlled P-T conditions for determination of actual gas adsorption capacity of the coal seams. This analysis shows that the maximum methane gas adsorbed in the coal sample CG-81 is 17 m³/t (Std. daf), at maximum pressure of 5.92 MPa and experimental temperature of 30°C. The calculated Langmuir regression parameters P_L and V_L range from 2.49 to 3.75 MPa and 22.94 to 26.88 m³/t (Std. daf), respectively.  相似文献   

土壤酶对碘离子在土壤中吸附行为的影响   总被引：1，自引：0，他引：1  

吴世军  陈繁荣  程俊  杨永强  吕莹  康明亮 《地球化学》2008,37(1):37-44

以批式试验法研究了微生物、葡萄糖氧化酶、脲酶、纤维素酶及其催化底物葡萄糖、尿素和纤维素对Ⅰ-在土壤中吸附的影响,结果表明微生物能显著提高Ⅰ-吸附量,但葡萄糖氧化酶、脲酶、纤维素酶及葡萄糖、尿素和纤维素对Ⅰ-吸附并无促进作用.葡萄糖氧化酶及葡萄糖含量在小于100 mg/L时对Ⅰ-吸附无影响,1000 mg/L时与Ⅰ-呈竞争吸附;脲酶及尿素随浓度增大,对Ⅰ-吸附的抑制作用变得明显;1～1000 mg/L范围内,纤维素酶和纤维素对Ⅰ-吸附没有影响;但葡萄糖氧化酶和葡萄糖生成的中间产物可促进土壤对Ⅰ-的吸附.平衡液中溶解性有机碳(DOC)含量随时间增加而逐渐降低,有机质浓度越大,降低趋势越明显.  相似文献   

沸石强化过滤的中试及生产性试验研究   总被引：2，自引：0，他引：2  

丁磊  王萍 《矿物学报》2008,28(3)

对新型水处理材料沸石强化常规给水处理工艺进行了中试和生产性试验,并与石英砂滤料做了对比.中试结果表明粒径为0.80-1.20mm沸石对浊度、氨氮、有机物都表现出良好的去除效果,过滤时的水头损失、反冲洗强度明显小于石英砂,不仅能满足反冲洗要求,还可节省反冲洗水量,降低运行成本.在生产性试验条件下,沸石对浊度、氨氮、耗氧量的去除率分别为95%、83%和39%.因此,在当前水源水遭到污染的情况下,用沸石替代石英砂滤料可明显改善水质,在不增加处理构筑物的情况下,对给水处理工艺可起到强化作用  相似文献   

Effect of Cyclic Loading Frequency on Undrained Behaviors of Undisturbed Marine Clay   总被引：2，自引：0，他引：2  

陈云敏  姬美秀黄博 《中国海洋工程》2004,18(4):643-651

Based on a series of cyclic triaxial tests, the effect of cyclic frequency on the undrained behaviors of undisturbed marine clay is investigated. For a given dynamic stress ratio, the accumulated pore water pressure and dynamic strain increase with the number of cycles. There exists a threshold value for beth the accumulated pore water pressure and dynamic strain, below which the effect of cyclic frequency is very small, but above which the accumulated pore water pressure and dynamic strain increase intensely with the decrease of cyclic frequency for a given number of cycles. The dynamic strength increases with the increase of cyclic frequency, whereas the effect of cyclic frequency on it gradually diminishes to zero when the number of cycles is large enough, and the dynamic strengths at different frequencies tend to the same limiting minimum dynamic strength. The test results demonstrate that the reasons for the frequency effect on the undrained soil behaviors are beth the creep effect induced by the loading rate and the decrease of sample effective confining pressure caused by the accumulated pore water pressure.  相似文献   

钛型吸附剂的表面特性     

谢式南  王俊鹤  周英兰  孙爱平 《中国海洋大学学报(自然科学版)》1990,(3)

用自装的BET容量法装置测定了几种粒状钛型吸附剂的比表面及其孔径分布。测定是在常温减压下进行的。结果表明:钛型吸附剂在加铀海水中的吸铀量与样品的比表面及孔径分布有一定的内在联系。这种表面性质的研究对吸附剂的筛选有重要的指导意义。  相似文献   

动荷载作用下海底粉土的孔压响应及其动强度   总被引：5，自引：0，他引：5  

冯秀丽  叶银灿  马艳霞  林霖 《中国海洋大学学报(自然科学版)》2002,32(3):429-433

本文选用近海分布较广的粉土为研究对象 ,利用室内动三轴试验结果 ,找出动荷载作用下粉土的动应力应变关系 ,分析模拟波浪荷载作用下粉土中的孔压响应、临界循环次数 ,确定波浪作用下粉土的应力状态、破坏临界循环次数 ,判断不同深度处的粉土发生液化的可能性及发生液化所需要的时间 ;研究粉土在动荷载作用下的强度降低 ,为海上工程设计和施工提供科学依据。  相似文献   

波浪作用下海床的有效应力分析   总被引：4，自引：0，他引：4  

吴梦喜  楼志刚 《海洋工程》2002,20(1):64-68

波浪作用下海床的稳定性分析是海洋工程地质评价的重要内容。海床的稳定性可通过计算分析其随时间变化的有效应力场来评估。本文建议了一个周期荷载作用下土体的本构模型 ,并用于计算波浪作用下海床的应力与变形。采用Biot固结理论和有限单元法 ,分析了海床的动态应力场与孔隙水压力场。波浪作用下两种渗透系数时有效应力的动态变化过程结果对比 ,反映了渗透消散作用对海床有效应力变化的影响  相似文献   

Study of Adsorption Isotherm Curves of Amino Acids on the Kaolinite     

刘效兰  张正斌 《海洋通报(英文版)》2002,4(1):52-60

This paper studies the adsorption isotherm curves of four amino acids (glyucine,aspartic acid,glutamic acid and lysine)and the effects of existences of different concentrations of Cu(Ⅱ) on them.Both the adsorption isotherm of the amino acids on the kaolinite and that when the copper ion Cu(Ⅱ） exists belong to the Langmuir type.The slopes of these adsorption isotherm increase with the increasing concentrations of Cu(Ⅱ） added.It can be explained in terms of formation of the type(Ⅰ） ternary surface complexes in these systems.The regular pattern of the effects of copper ion Cu(Ⅱ) on the adsorption isotherm of amino acids on the kaolinite is identical with that of its effects on the exchange and adsorption percentage E(%)-pH on the kaolinite in the same system.  相似文献