双酶法制备低黏度辛烯基琥珀酸淀粉钠的工艺条件   总被引：4，自引：0，他引：4  

阳元娥  罗发兴  黄强  谭伟 《广东海洋大学学报》2004,24(4):49-53

对双酶法制备用作微胶囊壁材的低黏度辛烯基琥珀酸淀粉钠的工艺路线与工艺条件进行了研究。正交实验结果表明 ,在酯化淀粉乳质量浓度 2 0 %、每 g淀粉α 淀粉酶的用量为 6SKBU的条件下 ,影响产品性能的各因素中 ,糖化酶的用量对产品的DE值和流度的影响最大 ,各因素的重要性依次是 :糖化酶的用量、糖化酶作用时间、α 淀粉酶保温作用时间。最佳工艺条件是 :α 淀粉酶保温作用时间 4min ,每 g淀粉糖化酶用量 0 .2GAU ,糖化酶作用时间 2 .5h ,此时产品的DE值为 30 ,流度为 80左右  相似文献   

Application of micropolar plasticity to post failure analysis in geomechanics     

Majid T. Manzari 《国际地质力学数值与分析法杂志》2004,28(10):1011-1032

A micropolar elastoplastic model for soils is formulated and a series of finite element analyses are employed to demonstrate the use of a micropolar continuum in overcoming the numerical difficulties encountered in application of finite element method in standard Cauchy–Boltzmann continuum. Three examples of failure analysis involving a deep excavation, shallow foundation, and a retaining wall are presented. In all these cases, it is observed that the length scale introduced in the polar continuum regularizes the incremental boundary value problem and allows the numerical simulation to be continued until a clear collapse mechanism is achieved. The issue of grain size effect is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

Plane Symmetric Domain Wall in Lyra Geometry     

Anirudh Pradhan  I. Aotemshi  G.P. Singh 《Astrophysics and Space Science》2003,288(3):315-325

In this paper general solutions are found for domain walls in Lyra geometry in the plane symmetric spacetime metric given by Taub. Expressions for the energy density and pressure of domain walls are derived in both cases of uniform and time varying displacement field β. It is also shown that the results obtained by Rahaman et al [IJMPD, 10, 735 (2001)] are particular case of our solutions. Finally, the geodesic equations and acceleration of the test particle are discussed. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach     

A. T. C. Goh  F. H. Kulhawy 《国际地质力学数值与分析法杂志》2005,29(6):627-642

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements     

Ahmet Şenol  Mustafa Aytekin 《Geotechnical and Geological Engineering》2008,26(3):313-321

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.  相似文献   

Action of Cnoidal Waves on Vertical Walls     

Qiu Dahong  Zang Jun  Jia Ying Academician of the Chinese Academy of Sciences  Professor  the State Key Laboratory of Coastal  Offshore Engineering 《中国海洋工程》1996,(2)

Based on the 2nd order cnoidal wave theory, the characters of shallow water standing waves and their action on vertical walls are studied in this paper. The theoretical expressions of the wave surface elevation in front of and the wave pressure on the vertical wall are obtained. In order to verify the theoretical results, model tests were made in the State Key Laboratory of Coastal and Offshore Engineering at DUT. For the wave surface elevation in front of the wall and the wave forces on the wall at the moment when the wave surface at the wall surface goes down to the bottom of the wave trough, the calculated results coincide quite well with the experimental results. For the wave forces on the wall at the moment when the wave surface at the wall surface goes up to the top of the wave crest, the theoretical expressions are modified by the experimental results. For the convenience of practical use, calculations are made for the wave conditions which usually occur in enginering practice by use of the inves  相似文献   

筒型基础沉贯阻力估算方法   总被引：1，自引：0，他引：1  

何炎平 《海洋工程》2002,20(3):23-28

系统地总结国外有代表性工程实践对筒型基础沉贯阻力的研究 ,并将各种方法综合起来 ,提出了加权综合估算法 ,供今后的研究和工程实践参考  相似文献   

An Approach to Stability Analysis of Embedded Large-Diameter Cylinder Quay   总被引：3，自引：3，他引：3  

WANG  Yuanzhan 《中国海洋工程》2002,16(3):383-393

The large-diameter cylinder structure, which is made of large successive bottomless cylinders placed on foundation bed or partly driven into soil, is a recently developed retaining structure in China. It can be used in port, coastal and off-shore works. The method for stability analysis of the large-diameter cylinder structure, especially for stability analysis of the embedded large-diameter cylinder structure, is an important issue. In this paper, an idea is presented that is, em-bedded large-diameter cylinder quays can be divided into two types, i.e. the gravity wall type and the cylinder pile wall type. A method for stability analysis of the large-diameter cylinder quay of the cylinder pile wall type is developed and a method for stability analysis of the large-diameter cylinder quay of the gravity wall type is also proposed. The effect of sig-nificant parameters on the stability of the large-diameter cylinder quay of the cylinder pile wall type is investigated through numerical calculation.  相似文献   

围垦区地下水位的控制及计算方法     

周理武  毛根海  宋建锋  陈观胜 《海洋学研究》2006,24(Z1):60-66

利用抽水井群和注水井群可以控制生态围垦区的地下水位.研究了潜水抽-注水井(群)耦合作用下浸润线的求解方法,利用势流理论和镜像原理,在假定含水层水平及土层渗透系数各向同性的条件下,推导出完整抽-注水井(群)耦合作用时浸润线的计算公式及非完整抽-注水井(群)耦合作用时浸润线的计算公式,还对潜水单个非完整抽水井及非完整抽-注水井群耦合作用时的解析解和数值解作了比较,结果表明,两者吻合得较好.同时还给出该理论用于地下水位控制中求解抽水量和注水量的方法等,对工程设计有实用价值.  相似文献   

Calculating Method and Verification of Wave Pressure Distribution on the Breast Wall of Mound Breakwater     

Lu Wujiang Associate Prof.  Hohai University    Nanjing 《中国海洋工程》1992,(4)

In this paper, the calculating charts and formulae about wave pressure on the breast wall are derived with seven parameters on the basis of physical model study. The verification shows that the charts agree with the example, and are adopted in the Specifications of Fishery Harbours Breakwater by the Ministry of Agricultures.  相似文献