地下洞库勘察中的深斜孔钻探和压水试验技术          下载免费PDF全文

吉孟瑞  孙桂明  吴昌庆  原华山 《山东国土资源》2001,17(2):56-60

青岛市黄岛区拟建设海底地下油气储藏库,前期地质勘察工作要求施工倾角45°、深220m的取心钻孔4个,并在孔内分段进行压水试验.本文介绍了如何利用XY-4型金刚石小口径钻机施工基岩深斜孔及压水试验技术.  相似文献   

Prediction of lateral variability in fracture intensity using multicomponent shear-wave surface seismic as a precursor to horizontal drilling in the Austin Chalk   总被引：1，自引：0，他引：1  

Michael C. Mueller 《Geophysical Journal International》1991,107(3):409-415

  相似文献   

Optimization of grid-drilling using computer simulation     

J. William Miller Jr. 《Mathematical Geology》1991,23(2):201-218

A computer simulation method has been developed to find efficient drilling grids for mineral deposits. A well-known ore deposit is used as a model to develop an efficient pattern for undiscovered ore bodies in the same area or in other prospects where similar geometry is suspected. The model for this study is the Austinville, Virginia deposit, a Mississippi Valley-type deposit composed of 17 ore bodies totaling 34 million short tons (30 million metric tons). The method employs a computer program that simulates drilling the model deposit with different patterns, including various levels of follow-up drilling. Follow-up holes are drilled in fences at one half the original spacing around holes in the grid that show ore-grade mineralization. Each pattern is drilled 100 times from random starting locations to provide a range of outcomes of drilling, including the best, worst, and most likely. For this study, patterns of 100 drill holes were composed of 10 fences spaced 1000–5000 feet (305–1524 m) apart, each with 10 holes spaced 200–1000 feet (61–305 m) apart. In all, 25 grids were used with zero to three levels of follow-up drilling. The 600/2000 grid, with drill holes spaced 600 feet (183 m) apart in fences spaced 2000 feet (610 m) apart, was compared with the 200/5000 grid because they represented contrasting outcomes. The 600/2000 grid penetrated many ore bodies consistently but with few multiple hits to individual ore bodies; whereas the 200/5000 grid inconsistently penetrated few ore bodies with many multiple hits. The 600/2000 grid was more efficient than the 200/5000 grid at hitting large ore bodies of 1,000,000 short tons or greater (900,000 metric tons or greater) and was made more effective by adding one cycle of follow-up drilling. The 600/2000 grid had a 97% chance of hitting one or more large ore bodies with at least one drill hole per ore body, and the 200/5000 grid had a 64% chance. Once hit, there was an 82% chance that the largest ore body would be penetrated by three or more holes when using the 600/2000 grid and an 88% chance using the 200/5000 grid.  相似文献   

天文(重力)水准的新手段及其计算方法     

张赤军 《大地测量与地球动力学》2002,22(4):31-34

介绍当今确定天文大地垂偏差的新仪器－CCD自动天体测量仪和确定两点间高程异常差的新方法，该方法用单极坐标代替繁琐的双极坐标进行计算，讨论了天文重力水准的误差及垂线偏差非线性影响等问题，估计在不久的将来，用这一手段施测山区似大地水准面的精度可望达到厘米级。  相似文献   

地壳演化与成矿作用——以川滇地洼系“四层楼”铜矿床序列为例     

黎功举 《矿产与地质》1991,(3)

提出川滇地洼系“四层楼”铜矿床序列的形成与陆壳演化的成生联系,是与本区陆壳由前地槽—地槽—地台—地洼演化各阶段与之相匹配的成矿作用的产物.与此同时,并总结了本区“四层楼”铜矿床序列的成矿作用具有明显的继承性、新生性、旋回性及层控性四大特点和多因复成矿床的成矿模式.  相似文献   

The mitigation of the vibration effects caused by tunnel blasts in urban areas: a case study in Istanbul     

Cengiz Kuzu 《Environmental Geology》2008,54(5):1075-1080

Ground vibrations generated by commercial explosives in tunnel construction may cause structural damage in urban areas. Therefore, suppressing the vibration effects and mitigating the possible hazard after blasting is important. We present a new method of controlled blasting that is environmentally friendly, and easy to utilize for tunnel construction. Small charges in this method are detonated sequentially to produce minimum side effects. The efficiency of the charges may be increased based on the previously monitored shots. This method is utilized in a tunnel construction in Istanbul with five experimental shots. In these experiments, the duration and also the quantity of explosives were carefully controlled. We were able to obtain better results with short durations (480 ms) instead of long durations (9,000 ms) although the vibration levels defined as peak particle velocity (PPV) became bigger while the quantity of the explosive charge increased from 3.088 to 9.264 kg.  相似文献   

库车坳陷大北地区下白垩统巴什基奇克组储层成因地质分挝   总被引：6，自引：0，他引：6       下载免费PDF全文

张荣虎  张惠良  寿建峰  沈扬  李昌 《地质科学》2008,43(3)

塔里木盆地库车坳陷大北地区白垩系巴什基奇克组储层以细一中粒岩屑砂岩为主夹少量长石岩屑砂岩,杂基为铁泥质和泥质(2%～10%).胶结物以方解石(3%～15%)为主.粘土矿物以伊利石、绿泥石和伊/蒙混层为主,不含高岭石,伊/蒙混层中的蒙皂石含量一般为(15～20)%;主要孔隙组合为残余原生粒问孔-溶蚀孔-微孔隙,占储集空间总量的(50～90)%,其次为构造缝-溶蚀孔,主要的孔隙类型为溶蚀孔和裂缝,总体属于低孔低渗-特低孔特低渗储层.综合分析认为:阶段性的前陆构造逆冲推覆作用对沉积旋回性、水体盐度变化及物源区距离变化的控制至关重要;构造活跃期扇三角洲前缘环境中形成的差分选中-粗砂岩、近源快速堆积造成的高岩屑含量、干旱成湖导致的高碳酸盐胶结和早成岩期相对深埋-后期持续快速深埋压实作用,是特低孔特低渗储层的主要成因;而较优质储层足构造平缓期辫状河三角洲前缘环境中形成的分选好的中-细砂岩、早期表生溶蚀及弱碳酸盐胶结作用、早期构造破裂的复合作用及其叠加效应的结果.  相似文献   

JD直连式深孔绳索取心钻杆的研制与应用          下载免费PDF全文

许华松  覃强华  熊海书 《探矿工程》2008,35(10):33-35

根据深部找矿的需要,立足于我国目前钻探设备现状和材料冶炼及机械加工水平,通过对钻杆选材、结构、制造工艺的创新,研制了一种两端镦粗后整体热处理再车螺纹的新型深孔绳索取心钻杆及配套钻具,经使用,效果达到了设计要求。  相似文献   

旋流除砂机理研究及自动旋流除砂器的开发          下载免费PDF全文

张学强  鄢泰宁 《探矿工程》2008,35(11):34-36

旋流除砂技术是利用离心力从泥浆中分离固相成分的技术,可广泛应用在地质钻探、有色、冶金工业及石油天然气工业领域。研制开发的自动旋流除砂器弥补了传统除砂器固相成分分离效果不佳、排砂口易堵的缺陷,显著提高泥浆或矿浆的净化质量与除砂效率,且能自动排堵,降低了除砂工作的时间消耗和成本。  相似文献   

水平定向钻进非开挖铺管技术市场分析     

袁明昕 《探矿工程》2008,35(10):49-51

重点分析了近几年我国水平定向钻进铺管钻机和施工市场的发展趋势,结合国外的水平定向钻进市场发展分析,总结了我国水平定向钻进技术与市场的发展态势。  相似文献