Revisiting the existence of an effective stress for wet granular soils with micromechanics          下载免费PDF全文

Jérôme Duriez  Richard Wan  Mehdi Pouragha  Félix Darve 《国际地质力学数值与分析法杂志》2018,42(8):959-978

A possible effective stress variable for wet granular materials is numerically investigated based on an adapted discrete element method (DEM) model for an ideal three‐phase system. The DEM simulations consider granular materials made of nearly monodisperse spherical particles, in the pendular regime with the pore fluid mixture consisting of distinct water menisci bridging particle pairs. The contact force‐related stress contribution to the total stresses is isolated and tested as the effective stress candidate for dense or loose systems. It is first recalled that this contact stress tensor is indeed an adequate effective stress that describes stress limit states of wet samples with the same Mohr‐Coulomb criterion associated with their dry counterparts. As for constitutive relationships, it is demonstrated that the contact stress tensor used in conjunction with dry constitutive relations does describe the strains of wet samples during an initial strain regime but not beyond. Outside this so‐called quasi‐static strain regime, whose extent is much greater for dense than loose materials, dramatic changes in the contact network prevent macroscale contact stress‐strain relationships to apply in the same manner to dry and unsaturated conditions. The presented numerical results also reveal unexpected constitutive bifurcations for the loose material, related to stick‐slip macrobehavior.  相似文献   

A multiscale work-analysis approach for geotechnical structures     

Hao Xiong  Zhen-Yu Yin  François Nicot 《国际地质力学数值与分析法杂志》2019,43(6):1230-1250

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.  相似文献   

日照市土壤地球化学元素分布规律及成因探讨          下载免费PDF全文

庞绪贵  宋娟娟  代杰瑞  喻超  张华平  陈磊  任天龙  王红晋 《山东国土资源》2018,34(4)

在日照市开展多目标区域地球化学调查，获取了表层土壤和深层土壤地球化学数据，通过对获得的地球化学参数进行统计分析，确定了日照市土壤地球化学基准值和背景值，认为日照市除部分元素或指标外，大部分元素或指标土壤地球化学基准值和背景值与全省土壤地球化学基准值和背景值接近。研究发现，日照市As，Cd，Cr，Cu，Hg，Ni，Pb，Zn等8种重金属元素背景值含量低于国家土壤环境质量标准的土壤一级标准限值，日照市土壤质量基本保持自然背景水平；而受工业化生产和城市化建设等后期人为活动影响，日照市表层土壤中Cd，C，Hg，N，P，S，Se，Corg等元素或指标出现明显富集，应引起重视。  相似文献   

双酶法制备低黏度辛烯基琥珀酸淀粉钠的工艺条件   总被引：4，自引：0，他引：4  

阳元娥  罗发兴  黄强  谭伟 《广东海洋大学学报》2004,24(4):49-53

对双酶法制备用作微胶囊壁材的低黏度辛烯基琥珀酸淀粉钠的工艺路线与工艺条件进行了研究。正交实验结果表明 ,在酯化淀粉乳质量浓度 2 0 %、每 g淀粉α 淀粉酶的用量为 6SKBU的条件下 ,影响产品性能的各因素中 ,糖化酶的用量对产品的DE值和流度的影响最大 ,各因素的重要性依次是 :糖化酶的用量、糖化酶作用时间、α 淀粉酶保温作用时间。最佳工艺条件是 :α 淀粉酶保温作用时间 4min ,每 g淀粉糖化酶用量 0 .2GAU ,糖化酶作用时间 2 .5h ,此时产品的DE值为 30 ,流度为 80左右  相似文献   

A continuum‐discrete hydromechanical analysis of granular deposit liquefaction     

M. Zeghal  U. El Shamy 《国际地质力学数值与分析法杂志》2004,28(14):1361-1383

A coupled continuum‐discrete hydromechanical model was employed to analyse the liquefaction of a saturated loose deposit of cohesionless particles when subjected to a dynamic base excitation. The pore fluid flow was idealized using averaged Navier–Stokes equations and the discrete element method was employed to model the solid phase particles. A well established semi‐empirical relationship was utilized to quantify the fluid–particle interactions. The conducted simulations revealed a number of salient micro‐mechanical mechanisms and response patterns associated with the deposit liquefaction. Space and time variation of porosity was a major factor which affected the coupled response of the solid and fluid phases. Pore fluid flow was within Darcy's regime. The predicted response exhibited macroscopic patterns consistent with experimental results and case histories of the liquefaction of granular soil deposits. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

Shearing flows of a dry granular material—hypoplastic constitutive theory and numerical simulations     

Chung Fang  Yongqi Wang  Kolumban Hutter 《国际地质力学数值与分析法杂志》2006,30(14):1409-1437

  相似文献   

Reliability assessment of granular filters in embankment dams     

Roberto Mínguez  Fernando Delgado  Ignacio Escuder  Manuel G. de Membrillera 《国际地质力学数值与分析法杂志》2006,30(10):1019-1037

Empirical criteria have been used successfully to design filters of most embankment large dam projects throughout the world. However, these empirical rules are only applicable to a particular range of soils tested in laboratory and do not take into account the variability of the base material and filter particle sizes. In addition, it is widely accepted that the safety of fill dams is mainly dependent on the reliability of their filter performance. The work herein presented consists in a new general method for assessing the probability of fulfilling any empirical filter design criteria accounting for base and filter heterogeneity by means of first‐order reliability methods (FORM), so that reliability indexes and probabilities of fulfilling any particular criteria are obtained. This method will allow engineers to estimate the safety of existing filters in terms of probability of fulfilling their design criteria and might also be used as a decision tool on sampling needs and material size tolerances during construction. In addition, sensitivity analysis makes possible to analyse how reliabilities are influenced by different sources of input data. Finally, in case of a portfolio risk assessment, this method will allow engineers to compare the safety of several existing dams in order to prioritize safety investments and it is expected to be a very useful tool to evaluate probabilities of failure due to internal erosion. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Size and shape evolution of pores in a viscoplastic matrix under compression     

M. Berli  M. L. Accorsi  D. Or 《国际地质力学数值与分析法杂志》2006,30(12):1259-1281

The frequent use of soils and earth materials for hydraulic capping and for geo‐environmental waste containment motivated our interest in detailed modelling of changes in size and shape of macro‐pores to establish links between soil mechanical behaviour and concurrent changes in hydraulic and transport properties. The objective of this study was to use finite element analysis (FEA) to test and extend previous analytical solutions proposed by the authors describing deformation of a single macro‐pore embedded in linear viscoplastic soil material subjected to anisotropic remote stress. The FEA enables to consider more complex pore geometries and provides a detailed picture of matrix yield behaviour to explain shortcomings of approximate analytical solutions. Finite element and analytical calculations agreed very well for linear viscous as well as for viscoplastic materials, only limited for the case of isotropic remote stress due to the simplifications of the analytical model related to patterns and onset of matrix‐yielding behaviour. FEA calculations were compared with experimental data obtained from a compaction experiment in which pore deformation within a uniform modelling clay sample was monitored using CAT scanning. FEA predictions based on independently measured material properties and initial pore geometry provided an excellent match with experimentally determined evolution of pore size and shape hence lending credence to the potential use of FEA for more complex pore geometries and eventually connect macro‐pore deformation with hydraulic properties. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

基于遥感技术对黄河口水色与岸线季相变化特征研究     

马安青  胡泓  袁道伟  胡婷 《中国海洋大学学报(自然科学版)》2008,38(1):151-156

使用Landsat-5 TM 2004年11月24日与2005年5月13日黄河口遥感影像,配合准同期外业实测资料,进行黄河口水体水色物质叶绿素a与悬浮泥沙的动态反演与河口岸线解译.研究表明由于秋末与春初黄河上游来水物质含量的差异,上述悬浮指标值存在显著的季相差异.根据样值与光谱特征建立的反演模型得出的反演值与实测值有平均在0.85以上的相关关系,具有很好的反演效果.岸线解译成果表明,黄河口岸线演变迅速,在河流平枯水量时期仍然具有较强的变化,岸线推进尤以新河口附近显著.这表明,使用遥感手段是进行河口生态环境质量监测的有效手段,是进行岸线动态变化研究的一种基本技术支撑手段.  相似文献   

凤太矿田层控铅锌(铜)矿床的成矿物质来源探讨     

隗合明  吕仁生 《地球科学与环境学报》1990,(1)

秦岭凤太矿田层控铅锌(铜)矿床的金属物质、硫和成矿溶液主要来自深部基底的岩石,属海底喷流—沉积成因矿床。从这一理论认识出发可进一步分析控矿地质条件及今后在该区有效地寻找同类矿床。  相似文献