锚杆动测问题的数值解     

许明  张永兴  李燕 《世界地震工程》2003,19(3):68-72

建立了锚杆动测问题的有限元模型，并对锚杆中的缺陷进行了数值模拟，获得了位移场的数值解。对该解在时域和频域范围内的讨论表明，锚杆中的缺陷将引起动测曲线一系列的变化，为现场动测曲线的识别提供了依据。  相似文献   

兴山县龙王嘴边坡稳定性分析与加固设计     

傅旭东  邹勇  邵中勇 《岩土力学》2003,(Z2)

龙王嘴边坡系坡高达70 m、坡角达70 °的高陡岩质边坡。分析了宜-秭公路石峡段龙王嘴高边坡变形的地质条件,在定量评价龙王嘴高边坡稳定性的基础上,进行了该高边坡的施工图加固设计。根据其特点将350 m长的坡段分为A,B,C三个区,分别采取预应力锚索与锚杆加固、挂网喷射混凝土支护和喷射混凝土支护等措施,实践证明,工程治理效果良好。  相似文献   

软土区旋喷式插筋微型桩工艺试验研究     

吴越琛  王进明  陆舟超 《探矿工程》2018,45(12):74-78

软土地质条件下建筑物的沉降变形和承载力要求越来越高,对基础施工工艺提出了较高要求。在高压旋喷施工工艺的基础上,提出旋喷式插筋微型桩施工工艺,开展了微型桩工艺试验研究,结果表明该工艺大幅提高了单桩桩基承载性能,为实际工程应用提供了技术数据支持。  相似文献   

An analytical method for determining shear stiffness of an inclined grouted bolt installed across an open discontinuity     

B. Stimpson 《Geotechnical and Geological Engineering》1987,5(3):299-305

Summary The shear stiffness of a grouted, rock bolt intersecting a discontinuity controls the amount of shear movement that can occur for a given shear force. In this paper an analytical model is developed for estimating the shear stiffness of a single bolt as a function of bolt inclination, hole and bolt diameter, bolt, grout and rock Young's moduli, and aperture (opening) across the discontinuity, and sensitivity studies conducted to determine the most significant of these variables as predicted by the model.  相似文献   

Experimental and numerical investigations of stresses in a fully grouted rock bolts     

U.?M.?Rao?KaranamEmail author  S.?K.?Dasyapu 《Geotechnical and Geological Engineering》2005,23(3):297-308

Rock bolts are widely used for rock reinforcement in hard-rock mining and civil engineering since a long time. However the use of fully grouted rock bolts and cable bolts is limited in coal mines. In order to improve performance of the rock bolts as a supplementary roof support system for any type of roof condition in coal measured formations, it is necessary to have a good understanding of the behavior of the bolt–grout and grout–rock interactions as well as the mechanism of load transfer in rock bolts.As the performance of grouted bolts depends on bond strength, extensive laboratory pullout as well as pushout tests were conducted in the present investigations with the variations in the bolt diameters, length and cement–water mixing ratios of grout. The load–displacement curves were developed and were verified with the numerical results obtained from finite element analysis using ALGOR software.Numerical models were validated for pushout tests and a detailed analysis was carried out to know the displacement, stress, strain distribution along the bolt.  相似文献   

Extrusion movements of a tunnel head reinforced by finite length bolts—a closed‐form solution using homogenization approach     

Henry Wong  Didier Subrin  Daniel Dias 《国际地质力学数值与分析法杂志》2000,24(6):533-565

An analytical model on the general behaviour of a tunnel head, reinforced by finite length bolts is proposed. This model is based on the homogenization method and spherical symmetry assumption. Despite its simplicity, and in consequence its limits of validity, it does allow a quick estimation of the key design parameters: frontal displacement, extension of decompressed zone, ground stresses and bolt tension, and constitutes thereby a very useful and handy tool for design engineers. In particular, the influence of the reinforcement length, as well as other important design parameters, are studied by the proposed model. The charts resulting from the parametric studies are directly applicable. Otherwise, the comparison to a 3D numerical model is also presented in this paper. The first results provide the validation of the analytical solution, at least in terms of average extrusion movements. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

土遗址全长黏结式锚固系统动力响应解析方法     

芦苇  赵冬  李东波  毛筱霏 《岩土力学》2020,41(4):1377-1387

以纵向宽大裂隙引起的夯土城墙遗址稳定问题为背景,建立危险土体?锚杆?稳定土体锚固系统简化力学模型。该模型将土体对锚杆的摩阻作用简化为一个线性弹簧和一个与速度相关的阻尼器的并联机构,将裂隙段锚杆对两侧土体的拉结作用简化为一个线性弹簧。基于弹性体动力理论建立锚固系统动力平衡方程,并推导了锚杆轴力和位移的动力响应解析解。最后,以新疆高昌故城南城墙某段锚固工程为例对提出的解析方法进行了说明,明确了锚杆轴力响应特征及其分布规律,并通过数值分析对其合理性进行了验证。结果表明：在动力作用下同一位置锚杆的轴力响应呈围绕静力平衡位置的波动形态,轴力峰值点位于裂隙附近,且逐渐向临空端和锚固端指数衰减。在考虑地震加速度沿遗址高度的放大效应后能够获得较精确的锚杆轴力响应。  相似文献   

强风化软硬互层岩质高边坡监测与数值模拟     

周勇  王旭日  朱彦鹏  李京榜  蒋小奎 《岩土力学》2018,39(6):2249-2258

强风化软硬互层岩质高边坡属岩质边坡特殊情况,其结构面组成及性质复杂,与支护结构相互作用的复杂程度较高,相互影响较大,顺倾结构面临空等情况下破坏可能性很大。以兰永一级公路某深挖路堑边坡的治理工程为依托,对边坡支护过程中及支护结束后的锚杆应力、锚索内力、坡体位移进行了原位监测,并利用岩土分析软件PLAXIS,采用节理岩模块对该边坡工程进行了数值模拟分析。监测及模拟结果表明：该边坡由节理裂隙与岩层面形成折线形潜在滑面,且具有相同滑动可能性的潜在滑面不止一个;支护结构穿透组成滑面折线的任何折线段部分均对结构面稳定有显著影响,但支护结构穿透泥岩面对结构面的影响较穿透节理裂隙更大;支护锚索预应力变化具有一定规律,预应力变化过程对坡体位移及支护结构内力具有一定影响;坡体的主动变形对支护结构内力的影响较坡体被动变形大,结构面产生滑动趋势对坡面位移影响的敏感程度较支护结构内力影响的敏感程度低。该边坡支护稳定,支护设计合理,可为同类边坡支护设计提供相应建议。  相似文献   

粘结式锚杆在爆炸动载下轴向应力分布研究     

单仁亮  周纪军  夏宇  孔祥松  常力夫  徐成 《岩土力学》2011,32(10):2965-2971

通过物理模型试验,研究在爆炸动载作用下临近工作面支护锚杆的应力状态。根据相似条件和简化假设,采用集中装药进行工程掏槽爆破模拟,利用粘贴在锚杆上的应变片测得近区端锚和全锚锚杆的轴向应变波。测试结果表明,爆破引起锚杆振动时间约为6 ms,经过9 ms的缓降期锚杆变形趋于稳定值;动载期间端锚锚杆在杆体中部锚固段测得峰值应力比杆体尾部自由段的值大,但相差不大,动载过后尾部的残余应力较大;全锚锚杆在杆体尾部测得的峰值应力和残余应力都远大于杆体中部测得值。利用无限体内一点受法向集中力作用的位移势函数,推导锚固体及周围岩体的轴向应力分布,并计算一定预应力在锚固区产生的附加轴向应力,结合动应力的作用分析锚杆的受力状态  相似文献   

软弱围岩隧道取消系统锚杆的现场试验研究   总被引：1，自引：0，他引：1  

陈建勋  杨善胜  罗彦斌  王梦恕 《岩土力学》2011,32(1):15-20

在软弱围岩隧道中,提出初期支护结构由钢架+喷射混凝土+钢筋网+锁脚锚杆+纵向连接筋组成,即取消系统锚杆用钢架联结处的锁脚锚杆代替。以包家山隧道为依托工程,采用现场试验的方法,选取2个试验段,进行锁脚锚杆取代系统锚杆后,有、无拱部锚杆的对比试验研究。对比试验的内容包括：隧道初期支护的净空收敛、围岩压力、钢架应力、喷射混凝土应力、锚杆轴力和纵向连接筋应力等。研究结果表明：2个试验段初期支护变形趋于稳定,结构受力安全,说明取消系统锚杆不影响初期支护结构的安全与稳定;拱部锚杆有受拉,也有受压,但受力都不大,最大拉应力仅为钢材极限强度的11.8%,其支护作用不明显;锁脚锚杆大部分受拉,最大值达到191 MPa,钢架支护作用明显,在支护体系中发挥着重要作用。取消系统锚杆减少了施工工序,降低了工程造价,缩短了工序循环时间,有利于及早封闭围岩以形成完整的支护结构。经济价值和社会效益显著。  相似文献