Screening of polymers on selected Hawaii soils for erosion reduction and particle settling     

James A. Teo  Chittaranjan Ray  Samir A. El‐Swaify 《水文研究》2006,20(1):109-125

In recent years, high‐molecular‐weight anionic polyacrylamides (PAMs) have been tested on a variety of soils, primarily in temperate climates. However, little information is available regarding the effectiveness of PAM for preventing soil loss through runoff in tropical settings. Screening tests were performed using three negatively charged PAMs and one positively charged PAM on five Hawaii soils (two Oxisols, one Vertisol, and two Aridisols) to determine erosion loss, sediment settling, and aggregate stability. A laboratory‐scale rainfall simulator was used to apply erosive rainfall at intensities from 5 to 8·5 cm h^?1 at various PAM doses applied in both dry and solution forms. Soil detachment due to splash and runoff, as well as the runoff and percolate water volumes, were measured for initial and successive storms. The impact of PAM on particle settling and aggregate stability was also evaluated for selected soil‐treatment combinations. Among the PAMs, Superfloc A‐836 was most effective, and significantly reduced runoff and splash sediment loss for the Wahiawa Oxisol and Pakini Andisol at rates varying between 10 and 50 kg ha^?1. Reduced runoff and splash sediment loss were also noted for PAM Aerotil‐D when applied in solution form to the Wahiawa Oxisol. Significant reductions in soil loss were not noted for either the Lualualei Vertisol or the Holomua Oxisol. It is believed that the high montmorillonite content of the Lualualei Vertisol and the low cation‐exchange capacity of the Holomua Oxisol diminished the effectiveness of the various PAMs tested. The polymers were also found to enhance sediment settling of all soils and helped improve their aggregate stability. This screening study shows the potential use of PAM for tropical soils for applications such as infiltration enhancement, runoff reduction, and enhanced sedimentation of detention ponds. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Siltation Prediction for Navigation Channels and Harbour Basins on Muddy Beach   总被引：2，自引：0，他引：2  

Liu Jiaju Zhang Jingchao Prof. Senior Engineer  River  Harbour Department  Nanjing Hydraulic Research Institute  Nanjing Senior Engineer  River  Harbour Department  Nanjing Hydralulic Research Institute  Nanjing 《中国海洋工程》1992,(2)

- This paper, after briefly reviewing the experimental research on sediment transport on muddy beach since the 1950s, improves and perfects the method for forecasting siltation in navigation channels and harbour basins which was first put forward in China by the authors. In consideration of silty sediment and sand, some factors in forecasting methods have been changed and modified. Consequently, the modified methods can be used either to compute siltation in navigation channels and harbour basins on muddy beach or to compute siltation and scouring in navigation channels and harbour basins on both silty beach and sandy beach. The verification of field data from eleven large, medium and small natural harbours shows a good agreement between the forecasting by the modified method and the natural conditions. Finally, the paper deals with the rational utilization of water area after the construction of the West Dyke in Lianyungang, the maintenance of water depth of the navigation channel at the entrance, siltation distribution, siltation in the navigation channel and harbour basin for ships of 100 thousand tonnnage. Results once again prove that the prospect of constructing Lianyungang Harbour into a deepwater harbour is bright.  相似文献   

大型桥梁钢沉井下沉过程局部冲刷研究     

高正荣  黄建维  赵晓冬 《海洋工程》2006,24(3):31-35

钢沉井下沉过程中局部冲刷的研究是同类桥墩设计和施工十分关心的重要课题,它对保证钢沉井安全有效施工、桥梁设计中施工期桥墩最大冲深、失稳和安全计算有重要参考价值。通过室内试验研究了钢沉井下沉过程中的局部冲刷机理和冲刷形态,探讨了桥墩下部钢沉井基础施工的相对高程对局部冲刷的变化规律,并将试验研究所获得的局部冲刷规律和影响因素,采用墩型系数方法引入局部冲刷计算中,给出了计算公式。研究成果补充了国家行业规范内容,对同类工程的设计、施工具有借鉴和指导意义。  相似文献   

Lower Cd/P ratio in settling particles than in surface seawater in the Okinawa Trough     

Kazuo Abe  Kazuo Iseki  Kazumaro Okamura  Yoko Kiyomoto 《Journal of Oceanography》2006,62(5):745-752

The characteristics of the ratios between cadmium (Cd) and phosphorus (P) in settling particles collected from the Okinawa Trough in the East China Sea were examined using a sediment trap, moored at a depth of 811 m for one year. The Cd/P ratios varied within a narrow range throughout the year, in spite of the large seasonal change in the total dry mass, Cd, and P fluxes. The average Cd/P ratio of settling particles was 0.062 (nmol/μmol), which was obviously lower than that of surface seawater around the study site (0.16). This lower ratio in the Okinawa Trough particles collected using the 811 m-moored trap certainly reflected the mixture of biologically produced organic matter around the study site and other components that were mainly transported as lateral flux from the shelf edge and slope area of the East China Sea.  相似文献   

江苏大丰潮滩悬沙级配特征及其动力响应   总被引：1，自引：5，他引：1  

李占海  高抒  沈焕庭  汪亚平 《海洋学报》2006,28(4):87-95

根据2002和2003年夏季在江苏大丰潮滩的现场观测资料,详细分析了悬沙级配的时空分布特征、影响因素及其对再悬浮、沉降和流速的响应.研究结果表明,悬沙颗粒较细,以粉砂为主,悬沙级配在潮周期内的变化模式有两种类型:一是稳定型,悬沙级配的时空(垂向和平面)变化很小;二是双峰型,悬沙级配的时空变化显著,粗细峰高度不断变化.再悬浮、沉降、涨潮时输入潮滩的悬沙和底质级配是影响悬沙级配的重要因子.再悬浮使粗颗粒悬沙的含量增加,悬沙与底质级配不断接近,沉降对悬沙级配的影响与再悬浮相反.再悬浮发生时悬沙级配对流速有明显响应.在没有再悬浮和沉降影响的情况下,潮滩不同部位、不同时间的悬沙级配趋于稳定和相同,对这种状态下的悬沙级配可称为背景悬沙级配,大丰潮滩背景悬沙级配的平均粒径为7μm.  相似文献   

长江河口三角洲区有孔虫沉降速度试验   总被引：7，自引：0，他引：7  

朱晓东 《海洋地质与第四纪地质》1990,10(3):47-58

作者对有孔虫壳体沉降速度进行了测试和研究,提出了不同属种有孔虫的壳径与沉降速度相关方程,引进了“当量直径”的概念,并用于长江口三角洲地层中的化石群,提出了解释潮汐河口有孔虫埋葬群的形成机理,从而定量的研究和辨别三角洲地层中的原地埋葬和异地埋葬化石群。  相似文献   

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada     

Carl L. Amos  Ian G. Droppo  Eduardo A. Gomez  Tom P. Murphy 《Sedimentology》2003,50(1):149-168

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.  相似文献   

Effects of Column Diameter on Setting Behavior of Dredged Slurry in Sedimentation Experiments     

Yu-Feng Gao  Yuan Zhou  Da-yong Li 《Marine Georesources & Geotechnology》2016,34(5):431-439

This article investigates the influence of dimensions of a settling column on the settling mode and the settling rate. End conditions of the settling stage in the hindered settling were also analyzed. It was found that the settling mode in a column with a smaller diameter tends to be consolidation settling. The effect of a settling column wall decreases with increasing column diameter, and it can be ignored provided the column diameter is larger than 14.5 centimeters. For the difference in initial water content, the settling behavior of the slurry develops a different sensitivity to the diameter effect. The influence of column diameter reduces as the initial water content of the slurry becomes higher. It is suggested that the internal diameter of the column used in a sedimentation experiment should be 14.5 centimeters.  相似文献   

Hydrologic simulation of clay‐settling areas in the phosphate mining district,Florida     

Jing Zhang  Mark Ross 《水文研究》2012,26(24):3770-3778

Clay‐settling areas (CSAs) are one of the most conspicuous and development‐limiting landforms remaining after phosphate mining. Many questions are asked by the mining and regulatory communities with regard to the correct modelling (predictive) methods and assumptions that should be used to yield viable hydrologic post‐reclamation landforms within CSAs. Questions as to the correct methodology to use in modelling/predicting long‐term CSA hydrologic performance have historically been difficult to answer because the data and analysis to support popular hypotheses did not exist. The goal of this paper was to substantially improve the data, analysis and predictive methodology necessary to return CSAs to viable hydrologic units, and moreover, to develop better understanding of the hydrology of CSAs and their ability to support wetlands. The study site is located at the Fort Meade Mine in Polk County, Florida. In this paper, continuous model simulation and calibration of study site were conducted for the hydrologic model, Hydrological Simulation Program – FORTRAN, which was generally selected on the basis of its popularity in predicting the hydrologic behaviour of CSAs. The objective of this study was to simulate streamflow discharges and stage to estimate runoff response from these areas on the basis of the observed rainfall within the CSA. A set of global hydrologic parameters was selected and tested during the calibration by the parameter estimation software PEST. A comparison of the simulated and observed flow data indicates that the model calibration adequately reproduces the hydrologic response of the CSAs. The estimated parameters can be used as references for future application of the model. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

灰色系统理论在单桩静载荷试验中的应用   总被引：1，自引：0，他引：1  

陈科平  彭振斌  何忠明 《矿产与地质》2005,19(5):573-575

为了通过预测单桩沉降量去估算其极限承载力,基于静载荷试验所得的桩基沉降量具有灰指数律特征,将荷载Q看作广义的时间,建立了荷载序列的等步长及非等步长GM （1,1）预测模型.工程实例证明,所建立的灰色预测模型具有较好的实用性和创新性.  相似文献