Use of multi‐platform,multi‐temporal remote‐sensing data for calibration of a distributed hydrological model: an application in the Arno basin,Italy     

Lorenzo Campo  Francesca Caparrini  Fabio Castelli 《水文研究》2006,20(13):2693-2712

Images from satellite platforms are a valid aid in order to obtain distributed information about hydrological surface states and parameters needed in calibration and validation of the water balance and flood forecasting. Remotely sensed data are easily available on large areas and with a frequency compatible with land cover changes. In this paper, remotely sensed images from different types of sensor have been utilized as a support to the calibration of the distributed hydrological model MOBIDIC, currently used in the experimental system of flood forecasting of the Arno River Basin Authority. Six radar images from ERS‐2 synthetic aperture radar (SAR) sensors (three for summer 2002 and three for spring–summer 2003) have been utilized and a relationship between soil saturation indexes and backscatter coefficient from SAR images has been investigated. Analysis has been performed only on pixels with meagre or no vegetation cover, in order to legitimize the assumption that water content of the soil is the main variable that influences the backscatter coefficient. Such pixels have been obtained by considering vegetation indexes (NDVI) and land cover maps produced by optical sensors (Landsat‐ETM). In order to calibrate the soil moisture model based on information provided by SAR images, an optimization algorithm has been utilized to minimize the regression error between saturation indexes from model and SAR data and error between measured and modelled discharge flows. Utilizing this procedure, model parameters that rule soil moisture fluxes have been calibrated, obtaining not only a good match with remotely sensed data, but also an enhancement of model performance in flow prediction with respect to a previous calibration with river discharge data only. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Belemnites from the lower middle Cenomanian of Hoppenstedt, northern Germany: significance and integrated correlation     

Markus Wilmsen  Michel Rabe 《Cretaceous Research》2008,29(5-6):936

The belemnite species Praeactinocamax primus (Arkhangelsky, 1912) and Belemnocamax boweri Crick, 1910 are described from the Cenomanian of the abandoned limestone quarry section of Hoppenstedt (Sachsen-Anhalt, northern Germany). They co-occur in the upper part of a prominent tripartite bioclastic limestone bed associated with the ammonite Acanthoceras rhotomagense, indicating the primus Event of the lower middle Cenomanian A. rhotomagense ammonite Zone. An integrated stratigraphical calibration including carbon stable isotope correlation to southern England suggests that the belemnite event horizon at Hoppenstedt occupies exactly the same chronostratigraphical position as elsewhere, highlighting the strictly isochronous character of the primus Event across northwestern Europe. Furthermore, stratigraphical gaps in the Hoppenstedt succession are evaluated.  相似文献   

The quest for refined calibration of the Jurassic time-scale     

József Pálfy 《Proceedings of the Geologists' Association. Geologists' Association》2008,119(1):85-95

  相似文献   

河南洛宁段河金矿流体包裹体研究和矿床成因   总被引：2，自引：1，他引：1  

赖勇张宇高栏  李文博 《中国地质》2008,35(6):1206-1219

河南省洛宁县段河石英脉型金矿主要包括石寨沟和岭东两个矿区,分别由3～4条含金石英脉构成。矿化过程从早到晚包括石英-黄铁矿、石英-多金属硫化物和石英-碳酸盐等3个阶段．其中中阶段金矿化最强,次为早阶段。各阶段石英中流体包裹体以气液两相包裹体为主．次为纯液体包裹体。激光拉曼测试表明,气液两相包裹体的液相为H2O,气相主要为Ho和CO2混合、纯H2O,次为纯CO2;纯液体包裹体为纯H2O。石寨沟矿区包裹体均一温度从早到晚依次为240．9～315．9℃．188．7～304．5℃,137．3～259．3℃：流体盐度变化依次为（6．74～12．85）wt%NaCl．eq,（2．41～8．68）wt％NaCl．eq,（2．24-7．86）wt%NaCl．eq。岭东矿区均一温度从早到晚依次为303．7-343．1℃,251．8-325．4℃,305．7～355．0℃：流体盐度变化依次为（5．11～11．70）wt％NaCl．eq,（2．74-10．11）wt％NaCl．eq,（0．53-6．74）wt％NaCl．eq。两矿区主成矿期流体均为中温、低盐度,早阶段流体为改造热液和变质热液的混合体,含一定量CO2,且流体CO2含量和盐度从早到晚逐渐降低。石寨沟矿区包裹体均一温度逐渐降低,而岭东矿区包裹体均一温度先降后升,加之岭东矿区各阶段成矿温度均高于石寨沟矿区．表明成矿流体系统主要受岩浆热驱动,岭东矿区更靠近岩体,且在晚阶段又有脉动性的岩浆加热．段河金矿区南部存在隐伏岩体。  相似文献   

Extraction and comparison of acoustic backscatter from a calibrated multi- and single-beam sonar     

Melvin  Gary D; Cochrane  Norman A; Li  Yanchao 《ICES Journal of Marine Science》2003,60(3):669-677

  相似文献   

Calibration of JASON-1 Altimeter over Lake Erie     

C. Shum  Y. Yi  K. Cheng  C. Kuo  A. Braun  S. Calmant  D. Chambers 《Marine Geodesy》2003,26(3):335-354

This article describes absolute calibration results for both JASON-1 and TOPEX Side B (TSB) altimeters obtained at the Lake Erie calibration site, Marblehead, Ohio, USA. Using 15 overflights, the estimated JASON altimeter bias at Marblehead is 58 ± 38 mm, with an uncertainty of 19 mm based on detailed error analysis. Assuming that the TSB bias is negligible, relative bias estimates using both data from the TSB-JASON formation flight period and data from 48 water level gauges around the entire Great Lakes confirmed the Marblehead results. Global analyses using both the formation flight data and dual-satellite (TSB and JASON) crossovers yield a similar relative bias estimate of 146 ± 59 mm, which agrees well with open ocean absolute calibration results obtained at Harvest, Corsica, and Bass Strait (e.g., Watson et al. 2003). We find that there is a strong dependence of bias estimates on the choice of sea state bias (SSB) models. Results indicate that the invariant JASON instrument bias estimated oceanwide is 71 mm, with additional biases of 76 mm or 28 mm contributed by the choice of Collecte Localisation Satellites (CLS) SSB or Center for Space Research (CSR) SSB model, respectively. Similar analysis in the Great Lakes yields the invariant JASON instrument bias at 19 mm, with the SSB contributed biases at 58 mm or 13 mm, respectively. The reason for the discrepancy is currently unknown and warrants further investigation. Finally, comparison of the TOPEX/POSEIDON mission (1992-2002) data with the Great Lakes water level gauge measurements yields a negligible TOPEX altimeter drift of 0.1 mm/yr.  相似文献   

压力传感器的自动标定技术     

王莉娜  赵先龙  阮锐  严晓明 《海洋测绘》2007,27(4):78-80

针对压力测量设备生产和维护过程中,对关键部件压力传感器标定处于手工操作状态、效率低、操作人员不易掌控、标定结果处置复杂的现状,开发了针对压力传感器的自动标定技术。该技术将计算机控制、智能化、曲线拟合和误差分析引入到压力传感器的标定过程中,大幅度提高了标定的效率和可靠性。经此技术标定过的压力探头,在使用中具有互换性,减轻了数据后处理工作的难度。  相似文献   

沿海地区城市发展及地面沉降的系统控制   总被引：9，自引：0，他引：9  

郑铣鑫 《海洋地质与第四纪地质》1992,12(1):57-65

本文运用系统工程原理,系统论述了地下水合理开发、管理和地面沉降系统控制,这对沿海地区地面沉降控制起到重要的作用。  相似文献   

A survey-based assessment of the Northeast Arctic cod stock     

Korsbrekke  Knut; Mehl  Sigbjorn; Nakken  Odd; Pennington  Michael 《ICES Journal of Marine Science》2001,58(4):763-769

  相似文献   

超短基线声学定位原理及其应用   总被引：11，自引：1，他引：11  

冯守珍  吴永亭  唐秋华 《海岸工程》2002,21(4):13-18

声学定位系统（Acoustic Positioning System)的技术研究和应用开发在现代海洋科学调查中起着重要作用。以挪威Simrad公司的HPR410P超短基线定位系统为例，从几方面讨论了超短基线（Ultrashort Baseline)声学定位系统的原理、应用范围、定位误差来源及其相应的修正方法；通过最大程度地减少误差来提高系统的定位精度，从而获取高质量的海洋科研调查资料。  相似文献