Reduction of hydroelastic responses of a very-long floating structure by a floating oscillating-water-column breakwater system     

D.C. Hong  S.Y. Hong  S.W. Hong 《Ocean Engineering》2006,33(5-6):610-634

The hydroelastic responses of a very-long floating structure (VLFS) placed behind a reverse T-shape freely floating breakwater with a built-in oscillating water column (OWC) chamber are analyzed in two dimensions. The Bernoulli–Euler beam equation is coupled with the equations of rigid and elastic motions of the breakwater and the VLFS. The interaction of waves between the floating rigid breakwater and the elastic VLFS is formulated in a consistent manner. It has been shown numerically that the structural deflections of the VLFS can be reduced significantly by a suitably designed reverse T-shape floating breakwater.  相似文献   

Numerical study of the motions and drift force of a floating OWC device     

D. C. Hong  S. Y. Hong  S. W. Hong 《Ocean Engineering》2004,31(2):139-164

The motion and the drift force of a floating OWC (oscillating water column) wave energy device in regular waves are studied taking account of the oscillating surface-pressure due to the pressure drop across the duct of the air chamber. The potential problem inside the chamber is formulated by making use of the Green integral equation associated with the Rankine-type Green function while the outer problem with the Kelvin-type Green function. The added mass, wave damping and excitation coefficients as well as the motion and drift force of the OWC device are calculated for various values of parameter related to the pressure drop.  相似文献   

Mooring optimization of floating platforms using a genetic algorithm   总被引：1，自引：0，他引：1  

Mehdi Shafieefar  Aidin Rezvani 《Ocean Engineering》2007,34(10):1413-1421

This paper presents a new procedure for the optimization of the mooring design of floating platforms, in which an automatic design sequence is also established. Regarding the optimization philosophy, the following aspects are dealt with:

• The optimization of the platform heading and its mooring pattern, taking into account the environmental force spreading;

• optimum line length or line tension for each mooring line, associated to the optimization of the mooring line materials and sizes.

Basically, the main goal of this paper is to introduce a new method, which will provide the quickest way to find the best mooring system, defined here as that which minimizes platform responses.A genetic algorithm (GA) is applied in this contribution, and this paper describes exactly the procedure of developing a GA code directed toward the solution of mooring design optimization problems. In order to prove the efficiency and the vast potential of the proposed algorithm as a design tool, sample moorings are analyzed for different environmental conditions and the final results, including the time required to run them, are presented.  相似文献   

Susceptibility to genetic damage and cell types in Mediterranean mussels   总被引：2，自引：0，他引：2  

Dolcetti L  Venier P 《Marine environmental research》2002,54(3-5):487-491

Micronucleus (MN) frequency is generally accepted as a marker of chromosomal damage and has been studied in a variety of cells and species. In previous work, we detected significant dose-related MN increases in the epithelial-like gill cells and agranular haemocytes of Mytilus galloprovincialis treated with benzo[a]pyrene, a well-known mutagenic pollutant. In addition, we have studied micronuclei and other nuclear abnormalities in mussels collected from the Venice lagoon (Italy). Frequency changes, possibly related to genotoxic/toxic stress, in both granular and micronucleated cells from gills and haemolymph, were detected. Environmental data suggest the effect of genotoxic pollutants and the importance of cell replication in the interpretation of micronucleus frequencies.  相似文献   

On the estimation of mooring line characteristic resistance for reliability analysis     

Roberto Montes-Iturrizaga  Ernesto Heredia-Zavoni  Francisco Silva-Gonzlez 《Applied Ocean Research》2007,29(4):239-241

The main aim of this work is to derive a correct formulation for the characteristic resistance of a mooring line segment with lognormally distributed component resistances and substitute an equation proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] in a paper published in this journal, which is not correct. The mooring line is considered as a series system and the resistances of individual components of a line segment are statistically independent and identically distributed; furthermore, the case of normally distributed component resistances is also discussed. A comparison with the corresponding equation proposed by DNV-OS-E301 is given. Results show that the formula proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] overestimates quite significantly the characteristic resistance of a mooring line segment.  相似文献   

Reliability-based comparative study for mooring lines design criteria     

Alberto Omar Vazquez-Hernandez  Gilberto Bruno Ellwanger  Luís Volnei Sudati Sagrilo   《Applied Ocean Research》2006,28(6):398-406

The characteristic environmental load effect for the design of mooring systems of floating units can be defined by means of three procedures: (a) the one associated to an extreme sea state with a given return period, (b) the worst one from a set of sea states on a contour line associated to a return period or (c) the extreme one based on response statistics for a long-term period. This work presents the result of a reliability-based partial safety factor calibration study for a LRFD mooring line design criteria considering the three approaches mentioned above. The calibration exercise is applied to three FPSOs considering North Sea environmental conditions and different water depths: 200, 800 and 3000 m. The mooring systems investigated take into account mooring lines made up of chains and polyester ropes. It is shown that, among all cases investigated, the design procedure based on the long-term response is the one that presents less scattered reliability indices around the target level.  相似文献   

Response-based method for determining the extreme behaviour of floating offshore platforms     

Said Mazaheri  Martine J. Downie 《Ocean Engineering》2005,32(3-4):363-393

The accurate prediction of extreme excursion and mooring force of floating offshore structures due to multi-variete environmental conditions which requires the joint probability analysis of environmental conditions for the worst case situation is still impractical as the processing of large amount of met-ocean data is required. On the other hand, the simplified multiple design criteria (e.g. the N-year wave with associated winds and currents) recommended by API known as traditional method does lead neither to the N-year platform response nor to the N-year mooring force. Therefore, in order to reduce the level of conservatism as well as uncertainties involved in the traditional method the response-based method can be used as a reliable alternative approach. In this paper this method is described. In order to perform the calculations faster using large databases of sea states, Artificial Neural Networks (ANN) is designed and employed. In the paper the response-based method is applied to a 200,000 tdw FPSO and the results are discussed.  相似文献   

An experimental method for determining the frequency-dependent added mass and added mass moment of inertia for a floating body in heave and pitch motions     

Jong-Shyong Wu  Mang Hsieh   《Ocean Engineering》2001,28(4):528

Most of the existing relevant materials have been obtained from experiments, in which evaluating the added mass at the resonant frequency corresponding to the peak of a frequency-response curve obtained from the “forced” vibration analysis is the most popular technique. In this paper, a simple experimental method was presented where the “free” vibration responses instead of the “forced” ones were used to determine the values of m_ah and I_ap. The main part of the experimental system is composed of a floating body (model) and a spring–shaft shaker. The “free” vibration of this main part was induced by imposing on it an initial displacement (and/or an initial velocity), and from the time histories of displacements information such as the “damped” natural frequencies, damping ratios, sectional added mass coefficients (C_V and C_P) were obtained. Since the displacements of the spring–shaft shaker are “translational” and those of the floating body due to pitch motions are “angular”, a technique for the transformation between the associated parameters of the two components of the main part was presented.  相似文献   

Inertial and hydrodynamic inertial loads on floating units     

Marcelo Ramos Martins   《Ocean Engineering》2007,34(16):2146-2160

The analysis of the dynamic behavior of floating units usually employs a coordinate system with origin in the unit's center of gravity, which significantly simplifies the global mass matrix. Hydrodynamic coefficients are then computed considering the same coordinate system. However, to analyze other conditions of mass distribution and maintain the simplicity of a global mass matrix, it is necessary to determine again the hydrodynamic coefficients, thereby reducing the efficiency of the entire process. Another important point is that the geometries frequently used in floating units are such that the cross-terms of an added mass are relatively unimportant when compared with the main terms, and it is, therefore, common to use only some of them to analyze the unit's dynamic behavior. Recently, however, in the search for production systems suitable for water depths greater than 3000 m, other geometries have been considered in technical and economic feasibility studies. It is possible that for these new geometries all terms of the added mass matrix must be included in the analysis. This paper presents the full development used to determine the complete global mass matrix, the inertial and hydrodynamic inertial loads that make use of the added mass matrices considering any coordinate system and the six degrees of freedom, including all cross-terms.  相似文献   

Ozone production due to emissions from vegetation burning     

Günter Helas  Jürgen Lobert  Dieter Scharffe  Luise Schäfer  Johann Goldammer  Jean Baudet  Brou Ahoua  Ayité-Lô Ajavon  Jean-Pierre Lacaux  Robert Delmas  Meinrat O. Andreae 《Journal of Atmospheric Chemistry》1995,22(1-2):163-174

Ozone has been observed in elevated concentrations by satellites over areas previously believed to be background. There is meteorological evidence, that these ozone plumes found over the Atlantic Ocean originate from vegetation fires on the African continent.In a previous study (DECAFE-88), we have investigated ozone and assumed precursor compounds over African tropical forest regions. Our measurements revealed large photosmog layers at altitudes from 1.5 to 4 km. Both chemical and meteorological evidence point to savanna fires up to several thousand km upwind as sources.Here we describe ozone mixing ratios observed over western Africa and compare ozone production ratios from different field measurement campaigns related to vegetation burning. We find that air masses containing photosmog ingredients require several days to develop their oxidation potential, similar to what is known from air polluted by emissions from fossil fuel burning. Finally, we estimate the global ozone production due to vegetation fires and conclude that this source is comparable in strength to the stratospheric input.  相似文献