Evaluating soil water routing approaches in watershed-scale,ecohydrologic modelling     

Garett Pignotti  Indrajeet Chaubey  Keith Cherkauer  Mark Williams  Melba Crawford 《水文研究》2021,35(3):e14034

Soil water dynamics are central in linking and regulating natural cycles in ecohydrology, however, mathematical representation of soil water processes in models is challenging given the complexity of these interactions. To assess the impacts of soil water simulation approaches on various model outputs, the Soil and Water Assessment Tool was modified to accommodate an alternative soil water percolation method and tested at two geographically and climatically distinct, instrumented watersheds in the United States. Soil water was evaluated at the site scale via measured observations, and hydrologic and biophysical outputs were analysed at the watershed scale. Results demonstrated an improved Kling–Gupta Efficiency of up to 0.3 and a reduction in percent bias from 5 to 25% at the site scale, when soil water percolation was changed from a threshold, bucket-based approach to an alternative approach based on variable hydraulic conductivity. The primary difference between the approaches was attributed to the ability to simulate soil water content above field capacity for successive days; however, regardless of the approach, a lack of site-specific characterization of soil properties by the soils database at the site scale was found to severely limit the analysis. Differences in approach led to a regime shift in percolation from a few, high magnitude events to frequent, low magnitude events. At the watershed scale, the variable hydraulic conductivity-based approach reduced average annual percolation by 20–50 mm, directly impacting the water balance and subsequently biophysical predictions. For instance, annual denitrification increased by 14–24 kg/ha for the new approach. Overall, the study demonstrates the need for continued efforts to enhance soil water model representation for improving biophysical process simulations.  相似文献   

贵州和四川盆地云量的气候研究   总被引：1，自引：1，他引：0  

林之光 《地理学报》1986,(4)

贵州和四川盆地是我国云量最多的地区,素有“天无三日晴”和“蜀犬吠日”之说,盆地西缘的雅安古时还有“雅州天漏”的谚语。从全球日照百分率分布推知,川黔地区也是世界上天气最阴沉的地区之一。川黔之阴一向为国内外气象界所注意,本文根据1951—1980  相似文献   

海相碳酸盐岩层系不整合量化研究及其意义——以四川盆地北部二叠系为例   总被引：2，自引：1，他引：1  

李儒峰  郭彤楼  汤良杰  陈国飞 《地质学报》2008,82(3):407-412

本文以四川盆地北部二叠系为例,将层序地层分析和沉积盆地波动过程分析相结合,提出了运用沉积波动过程分析研究沉积记录不完整性的量化方法,该方法可以相对准确地定量描述盆地形成演化过程中的升降运动,恢复无地层"记录"中的沉积-剥蚀过程,进而定量分析盆地的沉积-剥蚀过程、计算沉积间断(不整合)内的地层剥蚀量、认识其时空分布规律.同时,通过实际钻井及"人工井"的波动过程分析,结合地震剖面解释成果,可以作出主要不整合的空间分布图、各层位的剥蚀厚度图和原始厚度图、各期构造的剥蚀量分布图等重要基础图件,为盆地进一步系统分析及盆地模拟打好基础,结合沉积相研究及构造样式分析还可分析盆地沉积中心、生油层、盖层、储层等在时空中的变化规律.由于沉积盆地的升降波动过程直接影响着盆地的埋藏史、热史和生、排烃史,因此通过沉积波动过程的系统分析不仅能正确建立盆地演化的地质模型,还可以正确认识油气形成与分布规律,有效指导油气勘探.  相似文献   

苏北盘石山、练山地幔捕虏体的PGE地球化学   总被引：3，自引：0，他引：3  

杨雪英  孙亚莉  孙卫东  徐夕生 《地球化学》2008,37(3):197-205

通过锍镍火试金预富集法,分析了位于郯庐断裂带东侧的盘石山、练山地幔橄榄岩包体中铂族元素(PGE)和Au含量.不同于部分熔融残留成因地幔橄榄岩中通常所观察到的负斜率型或平坦型的分布模式,这两地的地幔橄榄岩以Pt、Pd、Ru相对富集,Ir、Rh相对亏损的"燕子型"分布模式为特征.Pt、Pd等不相容元素富集说明上地幔除经历过早期的部分熔融外,还经历了后期富Pt、Pd的高熔/岩比的熔(流)体的层析分离交代作用影响.盘石山地幔橄榄岩的PGE总量比练山高,Os的含量也比原始地幔值高;而练山地幔橄榄岩的Os含量比原始地幔值低,说明交代作用带走了练山地幔橄榄岩中的Os,却没有很大改变盘石山地幔橄榄岩中的Os含量,这可能与交代熔(流)体含硫量饱和程度有关.Rh的负异常可能与部分熔融过程中熔体较低的fo2有关.  相似文献   

油田高含水期基于微观渗流机理的宏观岩心水驱油数值模拟研究     

谷建伟  翟世奎  李怀明  薛发玉 《中国海洋大学学报(自然科学版)》2006,36(4):540-544

建立地层孔隙网络模型描述微观孔喉特征,利用逾渗方法计算基于微观渗流机理的相对渗透率曲线,并将之应用到数值模拟计算中,给出考虑微观渗流特征的方程,并进行数值求解,得到地层中流体分布特征。实例分析表明该方法可以得到基于微观特征的剩余油分布数量和形式,为调剖堵水、化学驱提供技术参数,实现微观渗流机理与宏观计算的结合。  相似文献   

利用新技术对大型土方工程量测算方法的改进     

张洪普  杨久东 《地理空间信息》2008,6(5):121-123

通过分析三角高程的误差来源和消弱方法以及土方量计算的特点,提出了一种利用全站仪结合南方公司的cass软件测算土方量的新方法,既减少了工作量,又提高了测算精度,适合大型土方工程量的测算。  相似文献   

安徽巢湖大型平卧褶皱研究   总被引：3，自引：0，他引：3  

张开均  施央申 《大地构造与成矿学》1993,17(2):179-189

巢湖平卧褶皱由一个背斜和一个向斜组成,枢纽呈NNE向,轴面微向NWW平卧背斜根部倾斜。卷入褶皱的地层为上震旦统至上三叠统,厚达3.1km。褶皱分布面积约380km~2,波长9km,波幅18km。后期直立褶皱叠加于平卧褶皱之上,褶皱缩短量达19.17km,缩短率约53.7％,褶皱受控于大玵台阶状滑脱断层。褶皱地层由NWW往SEE运动,是一种变动滑脱褶皱。  相似文献   

Experimental investigation of the elastic modulus of a fractal system—A model of fractured rocks     

T. L. Chelidze  H. Spetzler  I. C. Getting  Z. A. Avaliani 《Pure and Applied Geophysics》1990,134(1):31-43

The elastic properties of a physical model representing a damaged rock matrix were studied using a square lattice deformed under tensile stress. The elastic modulusM of such a system varies in agreement with percolation theory as|x–x _c | ^f , wherex is the damage parameter andx _c the threshold value of the damage parameter,f3.6. Atxx _c the scale dependence ofM can be expressed asML ^–f/v , whereL is the size of the sample andv the correlation exponent in percolation theory.The experimental results are of interest in assessing elastic properties in earthquake focal zones and fault zones in general.  相似文献   

A Connectivity Index for Discrete Fracture Networks     

C. Xu  P. A. Dowd  K. V. Mardia  R. J. Fowell 《Mathematical Geology》2006,38(5):611-634

Connectivity is an important measure for assessing flow transport in rock, especially through fractures. In this paper, rock fracture systems are modelled by a discrete fracture model simulated by a marked point process. A connectivity index is then introduced to quantify the connectivity between any two points in space. Monte Carlo simulation is used to evaluate the connectivity index for stationary cases and relationships between the connectivity index and the parameters of the discrete fracture model are analysed. The average number of intersections per fracture, X_f, and the fracture intensity, P12 (P32), are calculated and the relationships between these parameters and the connectivity index are investigated, concluding that X_f is the more suitable parameter for the classification of rock mass flow properties. The relationships between the connectivity index and the percolation state of the fractured medium are also discussed. An edge correction is briefly discussed and a practical example is used to demonstrate the method of computing the connectivity index.  相似文献   

微量相X射线衍射定量分析的一种简便方法     

何泽能李振山  斯永敏 《岩矿测试》2005,24(2):81-86

阐述了关于微量相X射线衍射定量分析的一种简便方法———近似线性关系法,它适用于二相体系(或基体吸收系数基本恒定的多相体系)材料中微量相的定量分析。该方法不需要在待测样品中加入参考物相,分析时仅需对一条衍射线进行测定,因而分析时间很短,其测定结果与实际含量的相对误差为-10.2%～ 21.4%,与外标法和内标法的测量结果的精度相当。  相似文献