排序方式： 共有50条查询结果，搜索用时 31 毫秒
1.
A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution. 相似文献
2.
A new approach has been developed for describing the classification that arises at the diaphragm in multi-chamber ball mills. Fourteen industrial scale cement mills have been sampled in this study and after mass balancing, model fits of the equipment were done. Successive mill product predictions for the sampled conditions were achieved, and requirements to build up an optimization capable model are discussed. 相似文献
3.
4.
立方氮化硼内其具有“三高”特性，而成为一种理想的硬磨料得以发展，着重介绍了立方氮化硼磨具和刀具及其推广应用，并阐述其技术的发展对机械加工技术的进步具有重要的意义。 相似文献
5.
GE Heping SUN Yan LU Xiancai ZHU Wenbin GUO Jichun LIU Deliang & Chi-yuen Wang . Department of Earth Sciences Nanjing University State Key Laboratory of Mineral Deposit Nanjing China . Department of Earth Space Sciences University of Science Technology of China Hefei China . Department of Geology Geophysics University of California Berkeley CA USA 《中国科学D辑(英文版)》2004,47(3)
In the 1990s of the 20th century, we participated in the research of the stress field in fissure tectonics of scientific deep bore cores for the Deep Observation and Sampling of the Earths Continental Crust (DOSECC for short). Spherical and enriched ul-tra-micro granular textures (nm size), which enriches Nb element (Wang & Sun, 1990; Sun & Wang, 1993)[1,2], were found during the observation of ul-tra-micro slipping lamellae of ductile and brittle oc-curring in Late Mesozoic granites us… 相似文献
6.
7.
针对福建某低品位钼矿矿石性质,确定了粗磨粗选、粗精矿再磨精选的浮选方案。采用该浮选方案及合理的选别条件,对含钼为0.08%的钼原矿选别,获得钼精矿品位52.45%、钼精矿产率为0.14%、钼回收率90.19%的良好指标。 相似文献
8.
张世亮 《广东海洋大学学报》1994,(1)
采用直流励磁装置、磁性磨料及工件共同构成磁加工系统。磁性磨料在磁场的作用下，对轴承内、外圈滚道以磁刷的形式进行研磨。由于磨料的可流动性，加工时既能满足对被加工表面粗糙度的加工要求，又能较好地保持工件原有的形位精度；且加工后在被加工表面形成一定的压应力，使工件的抗疲劳强度提高，使用寿命延长。 相似文献
9.
四川省武都水库右岸EL574 m灌浆平洞揭露出厚度2.3～9.8 m的粉细砂层,普通水泥高压灌浆无法形成可靠的防渗帷幕。采用高压旋喷、湿磨细水泥、化学灌浆的组合处理方式,取得了较好的施工效果。通过钻孔压水、大功率声波CT、单孔声波、钻孔全景数字成像等方法检测,表明达到了设计防渗要求。 相似文献
10.
Kinetics of fine wet grinding of zeolite in a steel ball mill in comparison to dry grinding 总被引：1，自引：0，他引：1
Batch wet grinding of zeolite was studied with emphasis on a kinetic study in a laboratory size steel ball mill of 200 mm diameter. The breakage parameters were determined by using the single sized feed fractions of − 850 + 600 µm, − 600 + 425 µm and − 425 + 300 µm for the zeolite samples. The Si (specific rate of breakage) and Bi,j (primary breakage distribution) values were obtained for those feed size fractions in order to predict the product size distributions by simulation for comparison to the experimental data. The specific rates of breakage values for wet grinding in the first-order breakage region were higher than the dry values reported previously by a factor 1.7 at the same experimental conditions, but the primary breakage distribution (Bi,j) values were approximately the same. The simulations of the product size distributions of zeolite were in good agreement with the experimental data using a standard ball mill simulation program. The wet grinding of zeolite was subjected to slowing-down effect in the mill at 2 min of grinding, corresponding to an 80% passing size of about 400 µm. On the other hand, the slowing down effect in the dry grinding of zeolite was also seen at 4 min of grinding. In addition, effects of some operational parameters on dry and wet grinding of zeolite were determined by simulation using the breakage parameters obtained experimentally. 相似文献