大别山-苏鲁碰撞造山带构造几何学、运动学和岩石变形分析   总被引：14，自引：7，他引：14  

林伟王清晨  石永红 《岩石学报》2005,21(4):1195-1214

按照构造几何学特点和运动学特征我们把大别山-苏鲁造山带的分为三个构造单元:南部,中部和北部。造山带南部为一套构造堆叠体系;中部为一个混合岩穹窿,浅变质的砂岩、板岩和片岩构成了大别山-苏鲁造山带的北部构造单元。造山带南部的构造堆叠体系主要由前陆褶皱带构成:未变质的新元古代-早三叠世的沉积地层;由“宿松群”北部和苏北地区的“海州群”构成的高压变质岩石单元及含柯石英和金刚石的超高压变质岩石单元。造山带中部的混合岩穹隆由大别山地区的罗田穹隆和苏鲁地区的莱西-栖霞穹隆构成。同样大别山北部的浅变质“佛子岭-卢镇关群”和胶东地区浅变质的“蓬莱群”构成了造山带北部的构造堆叠体系。同时大别山和苏鲁两个构造地体均经历了相似的多期构造变形:沿 NW-SE 向矿物拉伸线理发育的上部指北的剪切变形代表着造山带主变形期的变形;早期向南逆冲的韧性剪切变形和沿中部混合岩穹隆边缘发育的重力滑脱变形体系,后者代表了混合岩穹隆形成时的垂向缩短作用。正是由于构造几何学和多期变形的可对比性决定了这两个变质地体具有相同的地球动力学背景。  相似文献   

Cenozoic Plate interaction of the Australia and Philippine Sea Plates: “hit-and-run” tectonics     

Manuel Pubellier  Jason Ali  Christophe Monnier 《Tectonophysics》2003,363(3-4):181-199

Recent studies in northwest New Guinea have shown the presence of at least two marginal basins of different age, both of which formed in back-arc settings. The older basin opened between the Middle Jurassic and Early Cretaceous, a remnant of which is now preserved as the New Guinea Ophiolite. Its obduction started at 40 Ma and it was finally emplaced on the Australian margin at 30 Ma. The younger basin was active during the Oligocene to Middle Miocene and was obducted in the Early Pliocene. Studies of the western edge of the Philippine Sea also reveal an important deformation of the Philippine arc in the Oligocene, which hitherto has remained unexplained. Using information from these systems, paleomagnetic results, kinematic reconstructions and geochemistry of the supra-subduction ophiolite, we present a plate model to explain the region's Eo–Oligocene development. We suggest that an extensive portion of oceanic crust extended the Australian Plate a considerable distance north of the Australian Craton. As Australia began its steady 7–8 cm/year northward drift in the Early Eocene, this lithosphere was subducted. Thus, the portion of the Philippine Sea Plate carrying the Taiwan–Philippine Arc to its present site may have actually been in contact with the ophiolite now in New Guinea and obduction led to deformation of the Philippine Sea Plate itself. Neogene Plate kinematics transported the deformed belt in contact with the Sunda block in the Late Miocene and Pliocene. This interpretation has implications for the origin for the Philippine Sea Plate and the potential incorporation of continental fragments against its boundaries.  相似文献   

Kinematics of throughgoing fractures in jointed rocks     

Martin D. Finn  Michael R. Gross  Yehuda Eyal  Grenville Draper 《Tectonophysics》2003,376(3-4):151-166

Throughgoing fractures play a major role in subsurface fluid flow yet the kinematics of their formation, which directly impact rock flow properties, are often difficult to establish. We investigate throughgoing fractures in the Monterey Formation of California that developed by the coalescence of pre-existing joints. At Lompoc Landing, throughgoing fractures fall into three main groups: linked, linked with aperture, and breccia zones. The segmented nature of their walls provides numerous piercing points to firmly establish the sense of displacement. Analysis of displacement vectors derived from piercing points demonstrates that the NW–SE trending throughgoing fractures, often interpreted as strike–slip faults, are in fact extensional structures in origin. We suggest that this method may be applied to throughgoing fractures that form by the same mechanism in other geologic settings. Establishing kinematics of throughgoing fractures will lead to a better understanding of their contribution to subsurface fluid flow.  相似文献   

依兰-伊通断裂新构造活动规律分析          下载免费PDF全文

翟明见  朱光  刘备  顾承串  张帅  林少泽  宋利宏 《地质科学》2016,(2):594-618

作为郯庐断裂带北段主干的依兰-伊通断裂, 其新构造活动性与活动规律仍然存在不同的认识.本次工作通过详细的野外调查, 发现该断裂内活断层广泛存在, 由东、西两支北东走向的主干活断层构成, 沿着古近纪地堑边界断层发育.这些活断层主要呈破碎型结构, 多为逆右行平移活动.通过对这些活断层一系列实测擦痕反演应力场, 显示它们多是在东西向挤压中活动的, 而现今应力场转变为北东东-南西西向区域性挤压.依据本次野外观察与¹⁴ C定年, 并结合前人定年结果与近代地震分布, 表明依兰-伊通西支活断层的最新活动时代为全新世与晚更新世相间, 而东支活断层的最新活动时代主要为早-中更新世.依兰-伊通断裂内活断层显示了明显的差异性活动, 表现为西支的活动强度明显大于东支, 西支的最新活动时代皆晚于东支, 沿走向上活动性强、弱相间与最新活动时代不断变化, 以及近代地震活动不均一分布.它们沿走向上的分段性、差异性活动主要是因为被一系列北西向断层切断所致.  相似文献   

车排子凸起与沙湾凹陷过渡带的构造模型   总被引：1，自引：0，他引：1       下载免费PDF全文

梁宇生吴松涛  路玉郑孟林  刘得光孔玉华 吴海生 《地质科学》2018,(1):155-168

车排子凸起位于准噶尔盆地扎伊尔山前,是夹持在南部四棵树凹陷和东部沙湾凹陷之间的三角构造带。然而对这个三角构造带是原地掩伏构造,山前推覆构造,还是走滑构造控制形成的认识存在争议。目前对于车排子凸起与沙湾凹陷过渡带的构造变形特征以及变形机制的认识尚不清楚。而过渡带是研究该区构造变形与演化的良好区域,精细研究该区域构造几何学与运动学对于揭示其构造变形机制以及认识盆山之间的关系具有积极作用,并对于该区油气勘探具有重要意义。本文以研究区的连片三维地震资料为基础,运用不整合面识别、轴面分析及平衡剖面等方法,对车排子凸起与沙湾凹陷过渡带进行精细的构造解析、建模与构造复原。研究表明,过渡带发育下二叠统（P₁j-P₁f）,中二叠统（P₂x-P₂w）,上二叠统（P₃w）,三叠系（T）,侏罗系（J）,白垩系（K）与古近系-第四系（E-Q）7个构造变形层序。发育佳木河组底部及石炭系内部滑脱层。深部（前二叠系）构造楔发育于整个过渡带,其个数和几何学形态的变化直接影响了上覆背斜形态。构造楔在早二叠世开始楔入,挤压作用持续至三叠纪末期。晚三叠世发育生长地层,显示了P-T构造层褶皱变形的时间,随后三叠纪末期,过渡带受到来自西北缘造山带方向的逆冲推覆构造的叠加作用,表现在后缘发育一系列叠瓦构造,推覆距离约为8 km,南部逆冲断层上盘二叠系-三叠系被剥蚀完全,北部残余少量下二叠统佳木河组。  相似文献   

香龙山背斜几何学、运动学及成因机制          下载免费PDF全文

邓铭哲何登发  李英强张煜颖 张旭亮 《地质科学》2018,(1):289-307

华南板块北侧大巴山构造带和内部雪峰山构造带的关系是华南板块陆内构造变形研究的重要内容。香龙山背斜位于大巴山构造带和雪峰山构造带之间,记录了两构造带相互复合、相互协调的重要信息。为研究香龙山背斜的几何学、运动学特征,分析其形成机制,本次研究利用香龙山地区最新的地震剖面,结合地质图分析、浅表地质剖面绘制等手段,取得了如下结论：1） 香龙山背斜为一短轴状背斜,背斜具有较为宽阔、平坦的顶部和较短的两翼,其西南侧发育构造鼻;2） 香龙山背斜的主要运动学模型为下部断层转折褶皱与上部构造楔复合的模型,其地层变形受到基底物质堆叠抬升的影响;3） 香龙山背斜形成于晚侏罗世-早白垩世,在古近纪遭受改造,这两个变形时期分别对应了香龙山背斜形成现今形态的两个阶段。香龙山背斜南北方向上缩短了11.4 km,缩短率为22.7%;4） 香龙山背斜是在雪峰山构造带北向挤压作用下,由来自大巴山构造带、雪峰山构造带的共同作用力形成的,后期改造作用可能受控于青藏高原了隆升对整个中国中、西部的影响。  相似文献   

阿尔泰山南缘东段玛因鄂博韧性剪切带特征及运动学、动力学分析   总被引：2，自引：0，他引：2  

张小林  周刚  罗世宾  郑开平 《新疆地质》2007,25(1):26-33

玛因鄂博韧性剪切带位于阿尔泰山南缘额尔齐斯大断裂东段,玛因鄂博断裂以北,带内岩石糜棱岩化强烈,线理、面理构造发育,局部剪切变形明显部位发育S-C组构、σ型和δ型残碎长石斑晶系,均指示为左行韧性剪切变形.带内变形岩石宏、微观特征显示:玛因鄂博韧性剪切带是以压扁变形为主的左行剪切变形,韧性变形深度相当于地壳10～15km深处,温度约300～450℃,压力在0.25～0.40GPa,是一种发生在地壳中-浅构造层次和中-低温度、中等压力条件下的韧性-脆性变形,其变形变质作用相当于中低绿片岩相,局部达高绿片岩相;剪切主应力方向为NEE向,约83°.剪切位移量和剪切带宽度大致相当,总剪切位移量约9.2～11.5km.该韧性剪切带的剪切活动持续时间较长,高峰期为290～270Ma,而其最后结束时间为230Ma左右.  相似文献   

黄土高原渭河宝鸡段北岸大型深层滑坡动力学机制研究   总被引：3，自引：0，他引：3  

辛鹏  吴树仁  石菊松  王涛  石玲 《地质学报》2014,88(7):1341-1352

为研究渭河盆地黄土塬边大型深层滑坡运动机制,通过对渭河宝鸡段北岸斜坡构造地貌过程解析、滑体地质剖面平衡计算与运动过程的动态数值模拟,结合黏土岩滑动带发育的宏观力学背景、物理结构变化特征与剪切蠕变、滑动力学行为特征研究,确定了渭河北岸大型深层滑坡的几何学、运动学特征,初步揭示了黏土岩质滑带塑性流动挤出的控滑机制。研究表明:①大型深层滑坡的运动变形由后缘向坡脚传递,后缘下降、前缘隆起,整体变形由底部泥岩控制,具有一定的水平位移,是旋转-平移复活式滑坡;②黏土岩滑动带结构损伤形成蠕变变形带,滑动过程中,塑性变形区在滑体下方呈倾斜三角形状,产生塑性流动变形,逆冲向上运动中形成翻卷结构,滑体前缘以流动状态隆起挤出;③黏土岩的塑性流动变形是黏土矿物含量增加、活性增强的结果,滑带土内的粘粒含量(2μm)由初始的17.94%增加到50.22%,蒙脱石的绝对含量从初始的13.19%增加至26.38%,而其比表面积平均由124.55增加至215.08,从而降低滑动带的强度、恶化水理性质,引起滑体剧烈变形,而滑体内赋存的高孔隙水压力可推动滑体滑动。  相似文献   

Giant HVC’s and the Rotation Curves of the Milky Way and M31     

E. Casuso  J. E. Beckman 《Astrophysics and Space Science》2006,306(3):139-145

We have modelled, for the cases of Milky Way and M31, the effects on the galactic discs, of the arrival at high velocity (≥150 km s⁻¹) of giant HI clouds, with masses of up to 10⁸M⊙. Predictions are compared with the detailed structure of the observed rotation curves for these two galaxies. The model explains the rises and falls observed at large distances from the centre of each galaxy, distributed with a degree of regularity in radius, in terms of a specific type of perturbations driven by the infall of the high velocity clouds (HVC's) arriving from the intracluster medium of the Local Group. The underlying rotation curve is explained conventionally via the distribution of the baryonic and dark matter components of the galaxy in question. This scenario, though tested here on the two major Local Group objects, is in principle applicable to galaxies undergoing minor mergers with subgalactic mass gas clouds.  相似文献   

Parameters of the Galactic density-wave spiral structure: Line-of-sight velocities of 156 star-forming regions     

《New Astronomy》2015

  相似文献