排序方式： 共有69条查询结果，搜索用时 31 毫秒
1.
胶东地区是典型的剪切带型金矿集中区,精确厘定该地区控矿剪切带的活动时代,可为探讨剪切带与金矿成因关系提供关键的时限约束,并且对矿床成矿模式的建立具有至关重要的意义。大量矿床地质证据显示胶东地区控矿剪切带中脆性变形活动对金矿体的形成具有直接影响,但其脆性变形时代尚不十分清楚。据此,本文在详细研究金矿体赋存特征的基础上,系统选取胶东焦家、玲珑、邓格庄、乳山这四个金矿区控矿剪切带断层泥中白云母进行40Ar-39Ar年代学研究。定年结果显示,胶东地区焦家剪切带、招平剪切带以及牟乳剪切带的脆性变形时代分别为110.3±1.5Ma、122.8±1.7Ma、119.6±1.2Ma~115.8±1.4Ma。其中焦家剪切带的脆性变形时代明显晚于招平和牟乳剪切带,可能代表了焦家蚀变岩型矿化形成后易遭受后期的构造叠加。综合胶东各金矿区控矿剪切带变形时代、岩体侵位时代、成矿时代及剪切带活动特征和矿体产出特征,本文认为在多期岩体侵位以及控矿剪切带递进变形过程中,剪切带韧性变形区中由高压流体作用产生的同期脆性破裂可形成脉型矿化,如乳山金矿;而在脆-韧性和脆性变形区中发生的大规模脆性变形可导致脉型和蚀变岩型矿化的形成,如玲珑、邓格庄和焦家金矿。但随着剪切带的递进变形和隆升剥蚀,后期多期次的脆性构造变形叠加,可导致多种矿化类型出现在同一构造部位,如焦家金矿中石英脉型和蚀变岩型矿化。 相似文献
2.
掌握岩石变形破坏过程中体积膨胀点至峰值强度点之间加速破裂行为的演化规律,是实现地质灾害物理预测的关键.本文考虑裂纹张开和闭合两种情况,基于断裂力学建立了三轴应力作用下裂纹扩展临界尺度与等效应力的关系.对微元体破坏概率,分别采用以等效应力表达的Weibull分布函数和裂纹尺度分形函数,通过对比导出了形状参数m与裂纹分布分维D_f关系的表达式.一个有趣的发现是,岩石峰值强度点与体积膨胀点应变比仅与m或D_f有关.对岩石蠕变或准蠕变破坏,合理的m值范围为[1.0,4.0],在此范围内应变比近似为常数1.48,该常数是描述不同尺度岩石加速破裂规律的物理自相似常数.实例分析表明,基于岩石加速破裂规律构建的多锁固段脆性破裂理论,其适用性广,尤其在崩滑和大地震预测领域,具有良好应用前景.此外,本文给出了b值与m值定量关系,以解释b值的物理意义,并探讨将其用于地震预测的可行性. 相似文献
3.
The Atlantic Moroccan Meseta margin is affected by far field recent tectonic stresses. The basement belongs to the variscan orogen and was deformed by hercynian folding and metamorphism followed by a post-Permian erosional stage, producing the flat paleorelief of the region. Tabular Mesozoic and Mio-Plio-Quaternary deposits locally cover the Meseta, which has undergone recent uplift, while north of Rabat the subsidence continues in the Gharb basin, constituting the foreland basin of the Rif Cordillera.The Plio-Quaternary sedimentary cover of the Moroccan Meseta, mainly formed by aeolian and marine terraces deposits, is affected by brittle deformations (joints and small-scale faults) that evidence that this region – considered up to date as stable – is affected by the far field stresses. Striated faults are recognized in the oldest Plio-Quaternary deposits and show strike-slip and normal kinematics, while joints affect up to the most recent sediments.Paleostress may be sorted into extensional, only affecting Rabat sector, and three main compressive groups deforming whole the region: (1) ENE–WSW to ESE–WNW compression; (2) NNW–SSE to NE–SW compression and (3) NNE–SSW compression. These stresses can be attributed mainly to the NW–SE oriented Eurasian-African plate convergence in the western Mediterranean and the escape toward the SW of the Rif Cordillera. Local paleostress deviations may be related to basement fault reactivation. These new results reveal the tectonic instability during Plio-Quaternary of the Moroccan Meseta margin in contrast to the standard passive margins, generally considered stable. 相似文献
4.
5.
F. Rojat V. Labiouse P. K. Kaiser F. Descoeudres 《Rock Mechanics and Rock Engineering》2009,42(2):341-359
Summary During the crossing of brittle rock formations at the L?tschberg base tunnel, failure phenomena have been observed both at
the tunnel face and at the walls. A detailed analysis has been undertaken to explain these behaviours, based on the recent
developments of Canadian research on brittle failure mechanisms. At the tunnel walls, a very good agreement is found between
the calculated and observed damage and between two prediction methods, i.e. a semi-empirical failure criterion and elastic
calculations with the “brittle Hoek-Brown parameters.” Near the face, due to the 3D nature of the stress conditions, some
limitations of these approaches have been highlighted, and the growth of wall failure has been analysed. This research allowed
a better understanding of the brittle rock mass behaviour at the L?tschberg base tunnel and showed that brittle failure processes
dominate the behaviour of deep, highly stressed excavations in massive to moderately jointed rock. It also illustrates where
improvements to the adopted approaches are required. 相似文献
6.
Crack damage stress as a composite function of porosity and elastic matrix stiffness in dolomites and limestones 总被引：4，自引：0，他引：4
Twenty-five uniaxial compression tests were performed to determine stress at onset of dilation, referred to herein as “the crack damage stress,” in heterogeneous dolomites and limestones. A simplified model for crack damage stress (σcd) is developed here using porosity, elastic modulus, Poisson's ratio and three empirical coefficients. The model shows that when porosity decreases and elastic modulus increases, σcd rapidly increases and approaches its maximum value. On the other hand, when porosity increases and elastic modulus decreases, σcd rapidly decreases and approaches its minimum value. The proposed model is validated for six heterogeneous limestone and dolomite formations which are widely distributed in Israel. 相似文献
7.
In the last decade, even in areas that had been considered tectonically stable, a great amount of Cenozoic, including the Quaternary period, structural data have been collected throughout Brazil. The main goal of this study is to describe the Cenozoic structures and tectonic evolution of an area that is located at the border of the Paraná Basin in the state of São Paulo.The research methods consisted of the analysis of: (1) brittle structure data, mainly conjugate fractures and fault slip data; (2) lineaments traced on air photos and TM Landsat and radar images; and (3) a second-order base surface map.The study area, during the Cenozoic, has been affected by five strike–slip tectonic events, which generated mainly strike–slip faults, and secondarily normal and reverse ones. The events were named, from the oldest to the youngest, E1-NE, E2-EW, E3-NW, E4-NS, and E5-NNE; and the maximum principal stresses σ1 strike approximately NE–SW, E–W, NW–SE, N–S, and NNE–SSW, respectively. Event E2-EW seems to have been contemporaneous with the deposition of the Rio Claro Formation, the most important Cenozoic deposit of probable Neogenic age, and also to have controlled the distribution of its deposits. Event E3-NW was the strongest one in the area, as is pointed out by structural data, and the maximum principal stress σ1 of event E5-NNE is partially concordant with the orientation of σH-max of well break-out data in the Paraná Basin, suggesting a Neotectonic activity for this event. Finally, discontinuities parallel and correlated to the directions of strike–slip faults of the Cenozoic events seem to have actively controlled the sculpturing of the relief in the study area. 相似文献
8.
岩石圈流变机制的确定及影响岩石圈流变强度的因素 总被引：20，自引：2，他引：20
讨论了确定岩石圈流变强度中存在的问题，根据Byerlee定律，给出了在Anderson断层系统下三种断层的摩擦滑动强度公式，利用小标本实验结果外推，用大标本实验结果作约束，得到岩石圈几种典型岩石的脆性破裂规律，利用上述结果和传统的方法，分别得到了鄂尔多斯和山西裂谷两个典型地区的流变强度随深度的变化。结果表明，以往的计算对岩石圈流变强度的估计过高，对脆性形变区估计不足，流变机制估计不对；岩石圈有力学分层的特性，但各地分层的深度范围不同，使得成层和力学作用变得复杂，讨论了水、应变率以及多相矿物对流变强度的影响。 相似文献
9.
断裂带的韧-脆性转化与成矿 总被引：1，自引：0，他引：1
根据河南西部绿岩型脉状金矿的一些地质现象,探讨了韧性剪切带转化为脆性断裂的机制.韧性剪切过程岩石的面理化为矿液参与断裂作用,增加流体压力创造了条件.流体压力的增加一方面可以改变断裂的力学性质;另一方面可以压裂围岩,促进断裂韧-脆性转化,为脉状矿床的形成创造了条件. 相似文献
10.
We present new data and interpretations on the Neogene tectonics of the Shan scarp area (central Myanmar) and its relationship with the India–Indochina oblique convergence. We describe ductile and brittle fabrics associated with the major features in this area, the Mogok Metamorphic Belt (MMB), the Shan scarp and the Sagaing fault. From these data we identify a succession of two tectonic regimes. First, a dominant NNW–SSE-trending extension, marked by ductile stretching that characterizes the MMB, and associated N70E brittle normal faults. Later, from Middle or Upper Miocene to the Present, these structures were cross-cut by brittle right-lateral faults, among which the most important are the N20W transpressive Shan scarp fault zone and the N–S Sagaing fault. To explain this transition from a dominant transtensive to a transpressive stress regime, that occurred during Miocene, we place our data within a larger geodynamic context. We suggest that, like the intraplate deformation in the Indian Ocean, the end of spreading in the South China sea, the opening of the Andaman basin or the end of subduction within the Indo-Burma range, the change in the tectonic regime in central Myanmar could be in response to a major Miocene regional plate kinematic reorganization. 相似文献