An Experimental Study of Several Special Issues Regarding the Ice Force on Conical Structures     

SHI  Qing-zeng 《中国海洋工程》2002,16(4):561-568

The effect of the cone spacing of a conieal structure on the ice force is studied by model experiments. The ice force reduction coefficient presented in this paper expresses the relationship between the ice force and the arrangement of cones. The experiments prove that the mode of the ice failure before the boundary of upward-downward bending cone (UDBC) is crushing. A conclusion can also be drawn from the experiments that the ice force on the boundary of UDBC is by far less than that on a vertical pile with the same diameter. Moreover, the ice force frequencies on upright and inve-rted cones are obtained under the field condition of the platform JZ20-2, respectively. The results show that the alterna-tion of the ice force on UDBC can hardly induce resonance of platform JZ20-2.  相似文献   

Strength Analysis of Turret Mooring Productive/Storage Tanker     

Zhang Shilian Jin Dexian Associate Professor 《中国海洋工程》1997,(3)

The longitudinal strength of turret mooring productive/storage tanker is studied.A numeri-cal example has been implemented according to the method presented in this paper to give practical il-lustration.From the results of the numerical example,it is concluded that the turret hole located near theforward of the amidships has small effect on the longitudinal strength of the ship hull.As for design ex-treme value of wave bending moment of storage tanker,statistic method is a more reasonablemethodology,especially with the consideration of the servere environmental conditions.The primary esti-mation of design section modulus of turret storage tanker can be determined by this design bending mo-ment.  相似文献   

Articulated Lifting System Modeling Based on Dynamics of Flexible Multi-Body Systems     

徐妍  冯雅丽  张文明 《中国海洋工程》2007,21(4):715-722

  相似文献   

Eocene paleomagnetism of the Caucasus (southwest Georgia): oroclinal bending in the Arabian syntaxis     

Mikhail L. Bazhenov  Valentin S. Burtman 《Tectonophysics》2002,344(3-4)

The Caucasus is very important for our understanding of tectonic evolution of the Alpine belt, but only a few reliable paleomagnetic results were reported from this region so far. We studied a collection of more than 300 samples of middle Eocene volcanics and volcano-sedimentary rocks from 10 localities in the Adjaro–Trialet tectonic zone (ATZ) in the western part of the Caucasus. Stepwise thermal demagnetization isolates a characteristic remanent magnetization (ChRM) in 19 sites out of 31 studied. ChRM reversed directions prevail, and a few vectors of normal polarity are antipodal to the reversed ones after tilt correction. The fold test is positive too, and we consider the ChRM primary. Analysis of Tertiary declinations and strikes of Alpine folds in the Adjaro–Trialet zone and the Pontides in Northern Turkey shows a large data scatter; Late Cretaceous data from the same region, however, reveal good correlation between paleomagnetic and structural data. Combining Late Cretaceous and Tertiary data indicates oroclinal bending of the Alpine structures which are locally complicated with different deformation. The overall mean Tertiary inclination is slightly shallower than the reference Eurasian inclination recalculated from one apparent polar wander path (APWP), but agrees with other. This finding is in accord with geological evidence on moderate post-Eocene shortening across the Caucasus. We did not find any indication of long-lived paleomagnetic anomalies, such as to Cenozoic anomalously shallow inclinations further to the east in Central Asia.  相似文献   

考虑轴向变形、双轴弯曲耦合效应的钢筋混凝土柱的弹塑性分析   总被引：6，自引：2，他引：6  

姬守中  江欢成 《地震工程与工程振动》2002,22(4):74-80

在实际地震作用下，高层，特别是高宽比较大的高层结构中，由于倾覆力矩的作用、柱子、特别是外边柱所受轴力的变化将不可忽略。轴向变形与双轴弯曲的耦合作用，将是柱子塑性变形的显著特征。基于材料本构关系的“纤维模型”，能较精确地反映轴向变形，双轴弯曲三者之间的耦合作用。一组钢筋混凝土柱子双轴压弯的计算结果与试验结果的比较，证明了“纤维模型”的有效性和精确性。  相似文献   

Middle Paleozoic paleomagnetism of east Kazakhstan: post-Middle Devonian rotations in a large-scale orocline in the central Ural–Mongol belt     

Natalia M. Levashova  Kirill E. Degtyarev  Mikhail L. Bazhenov  Adam Q. Collins  Rob Van der Voo   《Tectonophysics》2003,377(3-4):249-268

In order to test different hypotheses concerning the Paleozoic evolution of the Ural–Mongol belt (UMB) and the amalgamation of Eurasia, we studied Middle Devonian basalts from two localities (11 sites) and Lower Silurian volcanics, redbeds, and intra-formational conglomerates from three localities (20 sites) in the Chingiz Range of East Kazakhstan. The Devonian rocks prove to be heavily overprinted in the late Paleozoic, and a high-temperature, presumably primary, southerly, and down component is isolated at only four sites from a homoclinal section. Most Silurian redbeds are found to be remagnetized in the late Paleozoic; in contrast, a bipolar near-horizontal remanence, isolated from Silurian volcanics, is most probably primary as indicated by positive tilt and conglomerate tests. Analysis of paleomagnetic data from the Chingiz Range shows that southward-pointing directions in Ordovician, Silurian, and Devonian rocks are of normal polarity and hence indicate large-scale rotations after the Middle Devonian. The Chingiz paleomagnetic directions can be compared with Paleozoic data from the North Tien Shan and with the horseshoe-shaped distribution of subduction-related volcanic complexes in Kazakhstan. Both paleomagnetic and geological data support the idea that today's strongly curved volcanic belts of Kazakhstan are an orocline, deformed mostly before mid-Permian time. Despite the determination of nearly a dozen new Paleozoic paleopoles in this study and other recent publications by our team, significant temporal and spatial gaps remain in our knowledge of the paleomagnetic directions during the middle and late Paleozoic. However, the paleomagnetic results from the Chingiz Range and the North Tien Shan indicate that these areas show generally coherent motions with Siberia and Baltica, respectively.  相似文献   

GPS折射角资料的变分同化试验   总被引：3，自引：0，他引：3  

WANG Yunfeng  WANG Bin 《大气科学进展》2003,20(3):479-486

越来越多的新型观测资料为数值天气预报水平的进一步提高提供了许多新的机会。在各种新型的观测资料中,GPS(全球定位卫星系统)折射角资料无疑是非常重要的。GPS折射角资料具有分辨率高、全天候探测、覆盖全球等优点,实现对GPS折射角资料的变分同化,将具有非常重要的意义。文中介绍了如何获得及同化GPS折射角资料的原理。对GPS折射角资料的变分同化可以分为两种:间接同化和直接同化,文中对这两种方法都作了具体介绍。在变分同化的最小化过程中,计算效率无疑是最重要的,而优化步长的计算又直接关系到算法效率的成败。根据最小化算法的特点,通过数学推导,得出一种适合于各种最小化算法的计算优化步长的自适应方法。最后,还利用1995年10月11日的GPS折射角资料进行了数值试验,结果表明了变分同化方法和计算优化步长方法的有效性。  相似文献   

A multiphase approach for evaluating the horizontal and rocking impedances of pile group foundations          下载免费PDF全文

V.T. Nguyen  G. Hassen  P. de Buhan 《国际地质力学数值与分析法杂志》2016,40(10):1454-1471

This paper advocates the use of a multiphase model, already developed for static or quasi‐static geotechnical engineering problems, for simulating the behaviour of piled raft foundations subject to horizontal as well as rocking dynamic solicitations. It is shown that such a model, implemented in a FEM code, yields appropriate predictions for the foundation impedance characteristics, provided that shear and bending effects in the piles are taken into account, thus corroborating the findings of the asymptotic homogenization theory. Besides, it is notably pointed out that such a multiphase‐based computational tool makes it possible to assess the dynamic behaviour of pile groups in a much quicker way than when using direct numerical simulations, which may face oversized problems when large pile groups are concerned. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Compression limit state of HVAC submarine cables     

《Applied Ocean Research》2016

An industry accepted standard does not currently exist for determination of compression limits in a subsea cable. This has resulted in most manufacturers specifying that subsea cables are not permitted to be axially loaded in compression.Additionally industry guidance does not exist regarding the consequences of inducing compression forces within subsea cables and the resulting effect on cable integrity. Industry recommended practice and guidance also does not have any information regarding experimental test arrangements to determine allowable compression levels within a subsea cable. This lack of modelling/testing guidance along with manufacturer recommendations of zero compressive loads within subsea cables results in overly conservative and restrictive design parameters for subsea cable installation and use.Due to the complex interaction within a subsea cable structure, such as contact interaction and friction between cable strands, theoretical modelling has been unable to provide reliable stress predictions and therefore an experimental testing regime is required if compression limits within the cable are to be appropriately determined. This paper describes combined axial and bending test arrangements that can be used as a guideline for determination of allowable compression limits for subsea cables.  相似文献   

不同刚度植物杆群对规则波传播及紊动特性影响研究     

谭超  黄本胜  刘达  邱静  王珍  吉红香 《海洋工程》2016,34(6):38-45

以不同刚度硅胶圆杆群为概化植物模型,测定其抗弯弹性模量,通过波浪水槽实验,研究规则波在不同刚度植物杆群内的流速分布、紊动特征及不同刚度杆群的消浪效果。实验结果表明,当波浪通过柔性杆群时,受其摆动的影响,流速周期变化从单峰型逐渐转变成双峰型,杆群刚度越小形成的二次波峰越明显;不同刚度杆群内水体紊动强度变化显示,杆群刚度越大,造成杆群内水体的紊动强度越大;随着杆群抗弯弹性模量的增大,其消浪系数也增大,消浪系数的增长与材料的抗弯弹性模量值非线性关系,而是在某一弹性模量范围内,对消浪系数的影响较为敏感。  相似文献