A New Retracking Technique for Brown Peaky Altimetric Waveforms     

Fukai Peng 《Marine Geodesy》2018,41(2):99-125

A new Brown-Peaky (BP) retracker has been developed for peaky waveforms that usually appear within ～10 km to the coastline. The main feature of the BP is that it fits peaky waveforms using the Brown model without introducing a peak function. The retracking strategy first detects the peak location and width of a waveform using an adaptive peak detection method, and then estimates retracking parameters using a weighted least squares (WLS) estimator. The WLS assigns a downsized weight to corrupted waveform gates, but an equal weight to other normal waveform gates. The BP retracker has been applied to 4-year Jason-1 waveform (2002–2006) in two Australian coastal zones. The results retracked by BP, MLE4 and ALES retrackers have been validated against tide-gauge observations located at Burnie, Lorne and Broome. The comparison results show that three retrackers have similar performance over open oceans with the correlation coefficient (～0.7) and RMSE (～13 cm) between altimetric and tide-gauge sea levels for distance >7 km offshore. The main improvement of BP retracker occurs for distance ≤7 km to the coastline, where validation results indicate that data retracked by BP are more accurate (15–21 cm) than those by ALES (16–24 cm) and MLE4 (19–37 cm).  相似文献   

Validation of annuli of the South African anchovy, Engraulis capensis, using daily otolith growth increments     

Waldron  Miranda E. 《ICES Journal of Marine Science》1994,51(2):233-234

  相似文献   

Accuracy and precision of fish-count data from a "dual-frequency identification sonar" (DIDSON) imaging system     

Holmes  John A.; Cronkite  George M.W.; Enzenhofer  Hermann J.; Mulligan  Timothy J. 《ICES Journal of Marine Science》2006,63(3):543-555

  相似文献   

Validation and Improvement of Satellite-Derived Surface Solar Radiation over the Northwestern Pacific Ocean     

Kawai  Yoshimi  Kawamura  Hiroshi 《Journal of Oceanography》2005,61(1):79-89

The purpose of this study is to validate and improve satellite-derived downward surface shortwave radiation (DSSR) over the northwestern Pacific Ocean using abundant in situ data. The DSSR derivation model used here assumes that the reduction of solar radiation by clouds is proportional to the product of satellite-measured albedo and a cloud attenuation coefficient. DSSR is calculated from Geostationary Meteorological Satellite-5/Visible Infrared Spin-Scan Radiometer data in 0.05° × 0.05° grids. The authors first compare the satellite DSSR derived with a cloud attenuation coefficient table determined in past research with in situ values. Although the hourly satellite DSSR agrees well with land in situ values in Japan, it has a bias of +13∼+34 W/m² over the ocean and the bias is especially large in the low latitudes. The authors then improve the coefficient table using the ocean in situ data. Usage of the new table successfully reduces the bias of the satellite DSSR over the ocean. The cloud attenuation coefficient for low-albedo cases over the ocean needs to be larger in the low latitudes than past research has indicated. Daily and hourly DSSR can be evaluated from the satellite data with RMS errors of 11–14% and 30–33%, respectively, over a wide region of the ocean by this model. It is also shown that the cloud attenuation coefficient over land needs to be smaller than over the ocean because the effect of the radiation reflected by the land surface cannot be ignored.  相似文献   

黔北遵义团溪铝土矿勘探网密度探讨          下载免费PDF全文

翁申富  杨武 《江苏地质》2008,32(1):19-24

以黔北遵义团溪铝土矿后槽矿区一矿块为例,用50m×50m工程间距进行施工成果与100m×50m和100m×100m工程间距施工成果,对其矿体厚度、矿体形态、主要化学成分含量及储量变化进行分析对比,以探寻此类矿床应如何选择工程间距,才能更合理准确地对矿体进行圈定控制,以满足矿山开采设计的要求。通过资料分析对比认为,对黔北喀斯特型沉积铝土矿进行勘查而言,以≤50m×50m工程间距控制矿体并求取储量,效果较为理想。  相似文献   

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28   总被引：1，自引：0，他引：1  

Jean S. Kane 《Geostandards and Geoanalytical Research》2002,26(1):7-29

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.  相似文献   

Is Prediction of Future Landslides Possible with a GIS?   总被引：5，自引：0，他引：5  

Fabbri  Andrea G.  Chung  Chang-Jo F.  Cendrero  Antonio  Remondo  Juan 《Natural Hazards》2003,30(3):487-503

This contribution explores a strategy for landslide hazard zonation inwhich layers of spatial data are used to represent typical settings inwhich given dynamic types of landslides are likely to occur. Theconcepts of assessment and prediction are defined to focus on therepresentation of future hazardous events and in particular on themyths that often provide obstacles in the application of quantitativemethods. The prediction rate curves for different applications describethe support provided by the different data layers in experiments inwhich the typical setting of hazardous events is approximated bystatistically integrating the spatial information.  相似文献   

Validation of Landslide Susceptibility Maps; Examples and Applications from a Case Study in Northern Spain   总被引：9，自引：3，他引：9  

Remondo  Juan  González  Alberto  De Terán  José Ramón Díaz  Cendrero  Antonio  Fabbri  Andrea  Chung  Chang-Jo F. 《Natural Hazards》2003,30(3):437-449

A procedure for validating landslide susceptibility maps wasapplied in a study area in northern Spain and the results obtained compared. Validationwas used to carry out sensitivity analysis for individual variables and combinationsof variables. The validity of different map-making methods was tested, as well as theutility of different types of Favourability Functions. The results obtained show thatvalidation is essential to determine the predictive value of susceptibility maps. Italso helps to better select the most suitable function and significant variables, thus improving the efficiency of the mapping process. Validation based on a temporal strategy makes it possible to derive hazard maps from susceptibility maps.  相似文献   

不连续植被冠层辐射透过率和反射率的测量(英文)     

《遥感学报》1997,(Z1)

  相似文献   

Regionalization of unit hydrograph parameters: 1. Comparison of regression analysis techniques     

Y. -K. Tung  K. -C. Yeh  J. -C. Yang 《Stochastic Environmental Research and Risk Assessment (SERRA)》1997,11(2):145-171

Hydrologic regionalization is a useful tool that allows for the transfer of hydrological information from gaged sites to ungaged sites. This study developed regional regression equations that relate the two parameters in Nash's IUH model to the basin characteristics for 42 major watersheds in Taiwan. In the process of developing the regional equations, different regression procedures including the conventional univariate regression, multivariate regression, and seemingly unrelated regression were used. Multivariate regression and seeming unrelated regression were applied because there exists a rather strong correlation between the Nash's IUH parameters. Furthermore, a validation study was conducted to examine the predictability of regional equations derived by different regression procedures. The study indicates that hydrologic regionalization involving several dependent variables should consider their correlations in the process of establishing the regional equations. The consideration of such correlation will enhance the predictability of resulting regional equations as compared with the ones from the conventional univariate regression procedure.  相似文献