排序方式： 共有7条查询结果，搜索用时 125 毫秒
1
1.
瓦乔(瓦穴子—乔端)断裂带是北秦岭尤为重要的断裂带之一,该带经历了长期的变质变形作用,记录了二郎坪弧后盆地向华北板块南缘俯冲消亡的信息。本文运用多种方法,对瓦乔断裂带几何学、运动学及形成温压条件进行研究和探讨,得出以下几点认识:①瓦乔断裂带产状基本倾向NNE,带内线理发育,表现为由N向S逆冲的运动学特征,且存在左旋剪切的分量;②瓦乔断裂带变形岩石显微构造特征明显,反映了挤压应力下塑性流变的特征;③运用角闪石全铝压力计,得到瓦乔断裂带形成压力为0.64GPa。越靠近瓦乔断裂带中心,压力逐渐变大,位于断裂带中心压力达到0.68GPa,已达到中压相系环境;④运用角闪石—斜长石地质温压计算得瓦乔断裂带形成温度范围500～550℃,属中温环境。 相似文献
2.
P. Beneduce V. Festa R. Francioso M. Schiattarella M. Tropeano 《Physics and Chemistry of the Earth》2004,29(10):717-724
The Matera Horst (“Murgia materana”) is included in the Apulian plateau, basically formed by Mesozoic shallow-water carbonates. The zone is located in a present-day temperate belt and form a flat-topped morphostructural large element inside the foreland area of the southern Apennines. This horst is bordered by high-angle faults and surrounded by downthrown blocks covered by Plio-Quaternary marine and alluvial sediments. The structural high experienced several morphological cycles from Miocene to Quaternary. In particular, three evolutionary stages can be recognized at least. The first stage is currently represented by relics of a flat erosional landscape at the top of the relieves. The second one is testified by gentle slopes with wide glacis at the foothills, locally covered by coarse waste deposits. During the third stage a series of marine terraces formed and a drainage system developed creating both bland valleys and well-defined channels and gorges. The latter streams deeply carve the Cretaceous limestone of the Matera Horst for they represent the morphological response to the tectonic uplift of the area and clearly post-date the former features. Since the fluvial net took place on Pleistocene covers, later widely eroded, it is possible to conclude that the major part of the Matera Horst drainage system represents a good example of superimposition. However, low order streams and segments of major rivers appear to be structurally controlled, as suggested by comparison with the fracture system. Further, also open synclines and gently steeped flexures may locally exert a driving control on minor streams. These apparently conflicting genetic hypotheses can be explained by the role of exhumation of inherited structures of the bedrock in add to a constant interplay between tectonics, erosion and drainage evolution during Quaternary times. 相似文献
3.
米仓山构造带东西向的断裂逆冲兼左旋走滑,西段的韧性变形较强,东段脆性为主。北东向三个主断裂带由北而南逆冲兼左行剪切,早期可能发生脆韧性变形,后期叠加了脆性变形。前震旦系基底岩系变形特征主要表现为透入性流变,碎斑结构和糜棱结构发育,镶嵌构造、S-C组构、带状构造、眼球构造为主,局部偶见"δ"和"σ"旋转碎斑以及矿物鱼。石英颗粒以亚颗粒旋转动态重结晶为主。显微特征反映岩石变形温度相当于绿片岩相。利用Fry法测定石英颗粒三维应变应变强度集中在1.35～1.60之间,显示出从北到南逐渐增强的趋势。Flinn指数K和Nadei-Hossack图解均表明应变类型为近似平面应变的拉长型。运动学涡度分析表明米仓山应变以简单剪切变形作用为主,具有由南向北递增趋势。 相似文献
4.
Influence of tectonics and neotectonics on the morphogenesis of the peak karst of Halong Bay,Vietnam
Pascal Fenart N. N. Cat Claude Drogue Doan Van Canh Sévenn Pistre 《Geodinamica Acta》2013,26(3-4):193-200
AbstractIn northeast Vietnam, the karst of Halong Bay is characterized by very active neotectonics. The directional distribution of fracturing of the calcareous rocks is characterized by the influence of two major fault zones: the Red River fault zone (N140) and the Tan-Lu fault zone (N050). Karst development was favoured by intense fracturing, according to these two major directions, and reactived during recent tectonics by a compressional regime with σ1 N070, followed by an extensional regimes with σ1 near to EW that led to significant vertical movement. These tectonics, coupled with intense erosion, led to genesis and evolution of the spectacular morphology of this peak karst. © Elsevier, Paris 相似文献
5.
随着胜利探区勘探开发的逐步深入,主要勘探目标开始转向小断块、小砂体等微幅构造以及岩性隐蔽油气藏,传统的地震采集设计技术难以满足当前生产需求。为此,选取胜利探区复杂构造地质模型,开展基于波动方程理论的地震波照明和面向目标的观测系统优化设计技术的研究,形成了一套适合胜利探区二次采集的观测系统优化设计的技术系列。研究结果表明,该技术系列能够保证该区地质构造的形态完整,小断块、小砂体等微幅构造的成像质量也有较大幅度的提高。 相似文献
6.
通过构造岩鉴别岩石动态重结晶的机制 总被引：4，自引：0，他引：4
岩石如书,包含着丰富的地球演化信息。通过破解这本天书,地质学家得以了解发生在地球内部的地质过程。构造岩中的显微构造是“写在岩石中的变形过程”。通过显微构造观察,可以了解岩石矿物的变形机理。以天山造山带内发育的糜棱岩为具体实例,介绍了中、下地壳层次变形岩石动态重结晶的机理及形成的相关显微构造的特点。由于构造岩均是经历过重结晶作用的产物,显微观察只能揭示变形矿物重结晶的机制。在中、下地壳层次,矿物动态重结晶的主要机理分为3种（从低温到高温）：膨胀鼓出(BLG,又称膨凸)、亚晶粒旋转(SGR)和高温颗粒边界迁移(GBM)。这3种方式形成各具特色的显微构造：BLG形成近等粒交叉舌状构造;SGR产生定向排列的拉长新颗粒条带;而GBM造成典型的具不规则状颗粒边界、大小悬殊的新颗粒组合、颗粒内部波状消光不明显的显微构造。除了温度条件外,应变速率对动态重结晶机制也有明显的影响。在显微构造观察过程中,详细、全面应该是最重要的原则。 相似文献
7.
豫西双龙韧性剪切带是位于秦岭造山带核部的一条韧性剪切带,由两侧到中心依次发育了初糜棱岩、糜棱岩、超糜棱岩及假玄武玻璃一系列动力变质岩。该韧性剪切带是东秦岭造山带核部网结状走滑韧性剪切带中的一条,对其开展显微构造研究,对了解东秦岭造山带的变质变形环境及构造演化具有一定地质意义。本文在野外地质工作的基础上,通过对韧性剪切带进行岩石学和矿物显微构造特征分析,对韧性剪切带的性质及温度、古差应力、应变速率等变质变形环境进行了分析讨论。研究表明,双龙韧性剪切带运动学性质为左行剪切,变质变形温度约为400～500℃,古差应值约为51～61MPa。 相似文献
1