Wave tank and bench-top control testing of a wave energy converter     

《Applied Ocean Research》2019

An increasing number of experiments are being conducted to study the design and performance of wave energy converters. Often in these tests, a real-time realization of prospective control algorithms is applied in order to assess and optimize energy absorption as well as other factors. This paper details the design and execution of an experiment for evaluating the capability of a model-scale WEC to execute basic control algorithms. Model-scale hardware, system, and experimental design are considered, with a focus on providing an experimental setup capable of meeting the dynamic requirements of a control system. To more efficiently execute such tests, a dry bench testing method is proposed and utilized to allow for controller tuning and to give an initial assessment of controller performance; this is followed by wave tank testing. The trends from the dry bench test and wave tank test results show good agreement with theory and confirm the ability of a relatively simple feedback controller to substantially improve energy absorption. Additionally, the dry bench testing approach is shown to be an effective and efficient means of designing and testing both controllers and actuator systems for wave energy converters.  相似文献   

Single star scidar: atmospheric parameters profiling using the simulated annealing algorithm     

A. Habib  J. Vernin  Z. Benkhaldoun  H. Lanteri 《Monthly notices of the Royal Astronomical Society》2006,368(3):1456-1462

In this paper, we present a new method to estimate, for each turbulent layer labelled i , the horizontal wind speed   v ( h _i )  , the standard deviation of the horizontal wind speed fluctuations  σ _v ( h_i )  and the integrated value of   C ² _n   over the thickness  Δ h_i   of the turbulent layer   C ² _n ( h_i )Δ h_i   , where   h_i   is the altitude of the turbulent layer. These parameters are extracted from single star scintillation spatiotemporal cross-correlation functions of atmospheric speckles obtained within the generalized mode. This method is based on the simulated annealing algorithm to find the optimal solution required to solve the problem. Astrophysics parameters for adaptive optics are also calculated using   C ² _n ( h_i )  and   v ( h_i )  values. The results of other techniques support this new method.  相似文献   

Damage identification method using harmonic excitation force considering both modelling and measurement errors     

Aiko Furukawa  Junji Kiyono  Hirokazu Iemura  Hisanori Otsuka 《地震工程与结构动力学》2005,34(10):1285-1304

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

The first World Atlas of the artificial night sky brightness   总被引：5，自引：0，他引：5  

P. Cinzano  F. Falchi  C.D. Elvidge 《Monthly notices of the Royal Astronomical Society》2001,328(3):689-707

We present the first World Atlas of the zenith artificial night sky brightness at sea level. Based on radiance-calibrated high-resolution DMSP satellite data and on accurate modelling of light propagation in the atmosphere, it provides a nearly global picture of how mankind is proceeding to envelop itself in a luminous fog. Comparing the Atlas with the United States Department of Energy (DOE) population density data base, we determined the fraction of population who are living under a sky of given brightness. About two-thirds of the World population and 99 per cent of the population in the United States (excluding Alaska and Hawaii) and European Union live in areas where the night sky is above the threshold set for polluted status. Assuming average eye functionality, about one-fifth of the World population, more than two-thirds of the United States population and more than one half of the European Union population have already lost naked eye visibility of the Milky Way. Finally, about one-tenth of the World population, more than 40 per cent of the United States population and one sixth of the European Union population no longer view the heavens with the eye adapted to night vision, because of the sky brightness.  相似文献   

Estimation of anisoplanatism in adaptive optics by generalized SCIDAR profiling     

R. W. Wilson  N. J. Wooder  F. Rigal  J. C. Dainty 《Monthly notices of the Royal Astronomical Society》2003,339(2):491-494

  相似文献   

Investigating the use of proxies for fecundity to improve management advice for western horse mackerel Trachurus trachurus     

De Oliveira  J.A.A.; Roel  B.A.; Dickey-Collas  M. 《ICES Journal of Marine Science》2006,63(1):25-35

  相似文献   

Comparative performance of ADAPT and Laurec-Shepherd methods for estimating fish population parameters and in stock management     

Patterson  K. R.; Kirkwood  G. P. 《ICES Journal of Marine Science》1995,52(2):183-196

  相似文献   

Sample Disturbance in Soft and Sensitive Clays: Analysis and Assessment     

K. Nagendra Prasad  S. Triveni  T. Schanz  Late T. S. Nagaraj 《Marine Georesources & Geotechnology》2007,25(3):181-197

Despite the sophisticated methods employed to obtain high quality samples, they are prone to disturbance, due to stress release, let apart, due to sampling tools and techniques adopted. Critical reappraisal of different methods suggest that any method of sample quality assessment involving strength and deformation parameters would enable easier implementation and correct other engineering parameters for estimated sample disturbance. In this technical paper, sample disturbance index, using merely the slopes of compression paths, (representing mechanical response), in the pre- and post-yield stress regimes under odeometric loading conditions is proposed. This method is based on single oedometer test results on samples of unknown degrees of disturbance during sampling and handling. The unique feature of this approach is that the ideal rigid plastic material behavior is taken as reference. This eliminates the need for any additional experimental data or any calculations from the relationships formulated with any set of assumptions.  相似文献   

A Preliminary Study of Shear Wave in Seafloor Surface Sediments   总被引：1，自引：0，他引：1  

Bo Lu  Ganxian Li  Shaojian Huang 《Marine Georesources & Geotechnology》2006,24(1):17-28

This article preliminarily reports and analyses the transmission characteristics and behaviors of shear wave in the offshore seafloor surface sediments in China, discusses the relationships between the physical and mechanical features of the shear wave and the compression wave, and compares the testing results with that of Hamilton and Chen et al. The result shows that the shear wave can be tested if the seafloor surface sediment has tangent modulus. The shear wave velocity ranges from 50-600 m/s and the measuring frequency from 50-200 kHz. The sound velocity rate of shear wave and compression wave can be used to appraise the stress-strain feature of seafloor surface sediments. This study provides a basis for further describing and appraising the seafloor sedimentary acoustic-mechanical feature and building a geological-acoustic model on China's offshore sea area.  相似文献   

论氢化物的形成及其在分析测试领域的应用          下载免费PDF全文

郑大中  王惠萍  郑若锋 《江苏地质》2008,32(1):5-11

论述了氢化物形成的普遍性、氢化物的物理化学性质、元素周期系各类元素的氢化物类型。认为一些金属离子、非金属离子在酸性介质中与硼氢化钾（钠）作用及金属锌等强还原剂作用生成氢化物。综述了氢化物的形成在分析测试领域的应用：试样分解、分离富集、容量分析、光度分析、原子光谱分析、质谱分析。  相似文献