排序方式： 共有112条查询结果，搜索用时 484 毫秒
1.
高层钢框架-支撑结构二阶非线性随机地震响应分析 总被引：1，自引：0，他引：1
针对常用的高层钢框架－支撑结构，考虑材料非线性和几何非线性，建立了框架部分、支撑部分的二阶动力分析模型。用等效线性方法对结构进行非线性随机地震响应分析，结合工程算例，论述不同场地土、不同层数、不同支撑情况下，二阶效应对结构地震响应统计量的影响。 相似文献
2.
为研究钢筋砼摩擦耗能支撑框架结构的动力反应性能 ,对其中的摩擦耗能器单元和框架杆单元的单元刚度和力学模型做了分析。钢筋砼摩擦耗能支撑单元由支撑杆单元和钢板—橡胶摩擦耗能器单元组成 ,支撑单元可取空间杆单元 ,摩擦耗能器单元为平面应力矩形单元。摩擦耗能器单元的剪切恢复力曲线为理想的弹塑性曲线 ,根据耗能器单元的力学模型 ,可确定其在每一时刻的刚度 ;框架结构空间杆单元的恢复力模型采用双线型模型 ,根据杆单元的力学模型 ,可确定其在每一时刻的刚度。并利用所编制的程序对十层单榀两跨空间普通框架和摩擦耗能支撑框架在地震作用下进行了弹塑性反应时程分析 ,结果表明耗能支撑框架的顶层最大位移明显小于普通框架 相似文献
3.
带"人字"支撑的新型复合结构体系动力特征研究 总被引：6，自引：0，他引：6
探讨了一种新型复合结构——带“人字”支撑的梁柱体系的动力特征问题。在满足静力荷载作用下承载力要求的基础上，根据结构动力学原理，推导了该结构体系的动力特征方程，分析了复合结构体系的支撑截面和型式的变化对动力特征的影响，计算显示，增加支撑对提高结构的频率即抗侧刚度有明显作用，且随支撑截面尺寸增大，固有频率单调增加。支撑倾角在一定范围内变化时，对频率影响较大，而超过该范围时，其影响明显减小，由此说明“人字”支撑为较合理的支撑型式。结果表明，所研究的具有“人字”支撑的复合结构体系具有较高的抗侧能力。 相似文献
4.
屈曲约束支撑滞回曲线模型和刚度方程的建立 总被引：3，自引：0，他引：3
针对屈曲约束支撑，本文根据其反复荷载作用下的滞回特征，提出了一种滞回模型，并建立了屈曲约束支撑的弹塑性刚度方程。根据这种模型编制程序模拟绘制了屈曲约束支撑的滞回曲线，将模拟计算曲线与试验所得曲线进行对比，对比结果表明本文所提模型是准确、有效的。 相似文献
5.
6.
Shear‐type buildings with Maxwell model‐based brace–damper systems are studied in this paper with a primary emphasis on the effects of brace stiffness. A single‐story building with a viscous damper installed on top of a Chevron‐brace is first investigated. Closed‐form solutions are derived for the simple structure, relating the brace stiffness and damper coefficient to the targeted reduction in response displacement or acceleration. For a given brace stiffness, the solution is minimized to give a set of formulae that will allow the optimal damper coefficient to be determined, assuring the desired performance. The model is subsequently extended to multistory buildings with viscous dampers installed on top of Chevron‐braces. For a targeted reduction in the mean square of the interstory drift, floor acceleration or base shear force, the minimum brace stiffness and optimal damper coefficients are obtained through an iterative procedure. The response reduction, which signifies the improved performance, is achieved by a combination of brace stiffness and viscous damper coefficients, unlike conventional approaches where damper coefficients are typically optimized independent of brace stiffnesses. Characteristics of multi‐degree‐of‐freedom systems are studied using a 2‐story and a 10‐story buildings where the effects of brace stiffness on the overall performance of the building can be quantified. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
7.
A thin‐profile buckling‐restrained brace (thin‐BRB) consists of a rectangular steel casing and a flat steel core that is parallel to a gusset plate. A thin configuration reduces the width of the restraining member and thus saves usable space in buildings. However, deformable debonding layers, which cover the steel core plate in order to mitigate the difference between the peak tensile and compressive axial forces, provide a space for the steel core to form high mode buckling waves when the thin‐BRB is under compression. The wave crests squeeze the debonding layers and produce outward forces on the inner surface of the restraining member. If the restraining member is too weak in sustaining the outward forces, local bulging failure occurs and the thin‐BRB loses its compression capacity immediately. In order to investigate local bulging behavior, a total of 22 thin‐BRB specimens with a ratio of steel core plate to restraining steel tube depth ranging from 0.3 to 0.7 and axial yield force capacities ranging from 421 kN to 3036 kN were tested by applying either cyclically increasing, decreasing, or constant axial strains. The restraining steel tube widths of all the specimens were smaller than 200 mm and were infilled with mortar with a compressive strength of 97 MPa or 55 MPa. Thirteen of the 22 thin‐BRB specimens' restraining members bulged out when the compressive core strains exceeded 0.03. A seismic design method of the thin‐BRB in preventing local bulging failure is proposed in this study. Test and finite element model (FEM) analysis results suggest that the outward forces can be estimated according to the BRB compressive strength, steel core high mode buckling wavelength, and the debonding layer thickness. In addition, the capacity of the restraining member in resisting the outward forces can be estimated by using the upper bound theory in plastic analysis. Both the FEM analysis and test results indicate that the proposed method is effective in predicting the possibility of local bulging failure. Test results indicate that the proposed design method is conservative for thin‐BRB specimens with a large steel core plate to restraining steel tube depth ratio. This paper concludes with design recommendations for thin‐BRBs for severe seismic services. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
8.
Effect of non‐moment braced frame seismic deformations on buckling‐restrained brace end connection behavior: Theoretical analysis and subassemblage tests 
下载免费PDF全文
下载免费PDF全文 In‐plane buckling‐restrained brace (BRB) end rotation induced by frame action is a commonly observed phenomenon in buckling‐restrained braced frames (BRBFs). However, its effect on BRB end connection behavior has not yet been clear. In this study, four BRB end deformation modes for quick determination of end rotational demand are proposed for non‐moment BRBF considering different BRB arrangements, installing story of BRBs, and boundary condition of corner gussets connected with column base. Key factors affecting BRB end rotation and flexural moments are examined theoretically by parametric analysis. Subassemblage tests of seven BRB specimens under horizontal cyclic loading were conducted by adopting two loading frames to impose the expected BRB end deformations. It shows that BRB end rotation subjected BRB ends to significant flexural moments, leading to premature yielding of BRB ends or even tendency of end zone buckling. The deformation modes, the flexural rigidity of BRB ends, and the initial geometric imperfections of BRBs were found to have significant influence on BRB end connection behavior. The triggering moment induced by BRB end rotation was the main contributor to end flexural moment. However, the moment amplification effect induced by flexure of BRB end zones became prominent especially for small flexural rigidity of BRB ends. Implications and future research needs for design of BRB end connections are provided finally based on the theoretical and experimental results. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
9.
Buckling‐restrained braces (BRBs) are widely used as ductile seismic‐resistant and energy‐dissipating structural members in seismic regions. Although BRBs are expected to exhibit stable hysteresis under cyclic axial loading, one of the key limit states is global flexural buckling, which can produce an undesirable response. Many prior studies have indicated the possibility of global buckling of a BRB before its core yields owing to connection failure. In this paper, BRB stability concepts are presented, including their bending‐moment transfer capacity at restrainer ends for various connection stiffness values with initial out‐of‐plane drifts, and a unified simple equation set for ensuring BRB stability is proposed. Moreover, a series of cyclic loading tests with initial out‐of‐plane drifts are conducted, and the results are compared with those of the proposed equations. © 2013 The Authors. Earthquake Engineering & Structural Dynamics published by John Wiley & Sons Ltd. 相似文献
10.
设置防屈曲支撑的钢管混凝土框架是一种新型钢管混凝土减震结构。采用有限元软件Opensees对设置防屈曲支撑的单层单跨钢管混凝土减震框架进行数值模拟,研究了框架梁柱线刚度比、防屈曲支撑初始刚度以及钢管混凝土柱轴压比等设计参数对该减震结构抗震性能的影响。研究结果表明：1数值模拟和试验结果吻合较好,验证了有限元模型的正确性;2梁柱线刚度比在0.1~0.3之间变化时,钢管混凝土减震框架的抗震性能较好;3BRB耗能支撑的初始刚度K1在40~80kN/mm变化时,减震框架的耗能减震效应较明显;4在合理的钢管混凝土柱轴压比范围内,当轴压比较大时,在钢管混凝土框架中设置防屈曲支撑能明显地提高结构的耗能能力和改善结构的强度退化现象。 相似文献