Risk assessment strategies for the reactivation of earth flows in the Northern Apennines (Italy)     

Giovanni Bertolini  Marco Pizziolo 《Engineering Geology》2008,102(3-4):178

The aim of this paper is to analyze the reactivation mechanism of ancient earth flows, with a view to gleaning information that can subsequently be utilized to formulate a risk-reduction strategy. All considerations made herein are the result of direct experience and observation of actual events which have occurred over the past few decades in the Northern Apennines. Particular attention has been paid to the analysis of the evolution of landslides during actual reactivation, acknowledging a typical, recurring succession of events that precede the failure of the slope. The hazard assessment of these large landslide bodies, which are of slope scale, constitutes a thorny problem, especially in view of the inapplicability of traditional deterministic models such as limit equilibrium stability analysis. Nevertheless, a site-specific assessment of probability of reactivation of these large and ancient earth flows is fundamental to effective land-use planning.  相似文献   

A GIS-based automated procedure for landslide susceptibility mapping by the Conditional Analysis method: the Baganza valley case study (Italian Northern Apennines)   总被引：14，自引：0，他引：14  

Aldo Clerici  Susanna Perego  Claudio Tellini  Paolo Vescovi 《Environmental Geology》2006,50(7):941-961

  相似文献   

Evaluating Earthquake-Triggered Landslide Hazard at the Basin Scale Through Gis in the Upper Sele River Valley   总被引：6，自引：0，他引：6  

Domenico Capolongo  Alberto Refice  Joseph Mankelow 《Surveys in Geophysics》2002,23(6):595-625

To evaluate techniques for assessing earthquake-triggeredlandslide hazard in the Southern Apennines (Italy), a GIS-based analysis was used to modelseismically induced slope deformations. Geological, geotechnical, geomorphological and seismologicaldata were integrated into a standard earthquake slope stability model. The model assessed thelandslide potential that existed during the 1980 Irpinian earthquake in the Upper Sele river Valley.The standard Newmark displacement analysis, widely used for predicting the location of shallowunstable slopes, does not take into account errors and/or uncertainties in the input parameters.Therefore, a probabilistic Newmark displacement analysis technique has been used. Probabilistictechniques allow, e.g., an estimation of the probability that a slope will exceed a certain criticalvalue of Newmark displacement. In our probabilistic method, a Monte-Carlo based simulation modelis used in conjunction with a GIS. The random variability of geotechnical data is modelled by probabilitydensity functions (pdfs), while for the seismic input three different regression laws wereconsidered. Input probability distributions are sampled and the resulting values input into empiricalrelations for estimating Newmark displacement. The outcome is a map in which to each siteis related a spatial probability distribution for the expected displacement in response to seismic loading.Results of the experiments show a high grade of uncertainty in the application of the Newmarkanalysis both for the deterministic and probabilistic approach in a complex geological setting suchas the high Sele valley, quite common in the Southern Apennines. They show a strong dependence onthe reliability of the spatial data used in input, so that, when the model is used at basin scale,results are strongly influenced by local environmental condition (e.g., topography, lithology, groundwatercondition) and decrease the model performance.  相似文献   

Orbitolinidae and Alveolinidae (Foraminiferida) from the uppermost Albian-lower Cenomanian of Monti d'Ocre (Abruzzi, Italy)     

Anna Mancinelli  Maurizio Chiocchini  Barbara Coccia 《Cretaceous Research》2003,24(6):729-741

A biostratigraphic study carried out in the Monti d'Ocre area, Abruzzi, Central Apennines, allowed us to recognize Orbitolina (Conicorbitolina) moulladei ‘Strata 5 (1985) 1’, Praealveolina iberica Reichel and Praealveolina simplex Reichel in uppermost Albian–lower Cenomanian shelf-edge deposits of the Fossato Machè succession. These foraminifers have now been found for the first time in the Apennines of central Italy; their finding is quite important from a palaeobiogeographic viewpoint, as it contributes to the improvement of our knowledge on facies distribution in the circum-Mediterranean regions during the Cretaceous Period. In the study area, the coeval Monte Rotondo and Monte Orsello sections also crop out; these are characterized by bauxite deposits and stratigraphic gaps reflecting episodes of emergence on the carbonate platform. The Monte Rotondo and Monte Orsello sections accumulated in a platform back-reef environment; consequently, in this sector of the Monti d'Ocre area, the depositional environment shifted from a back-reef westward and southward to a shelf-edge northward, during the latest Albian–early Cenomanian. Owing to synsedimentary tectonics, the area investigated underwent differential subsidence: westward and southward, wide areas were uplifted and subjected to emergence, karstification and bauxite accumulation, whereas sedimentation continued in a shelf-edge environment in the north-eastern area.  相似文献   

The effects of pre-existing normal faults on thrust ramp development: An example from the northern Apennines,Italy     

E. Tavarnelli 《International Journal of Earth Sciences》1996,85(2):363-371

The Umbria-Marche foreland fold-and-thrust belt in the northern Apennines of Italy provides excellent evidence to test the hypothesis of synsedimentary-structural control on thrust ramp development. This orogenic belt consists of platform and pelagic carbonates, Late Triassic to Miocene in age, whose deposition was controlled by significant synsedimentary extension. Normal faulting, mainly active from Jurassic through Late Cretaceous-Paleogene time, resulted in significant lateral thickness variability within the related stratigraphic sequences. By Late Miocene time the sedimentary cover was detached from the underlying basement and was deformed by east-verging folds and west-dipping thrusts. Two restored balanced cross sections through the southernmost part of the belt show a coincidence between the early synsedimentary normal faults and the late thrust fault ramps. These evidences suggest that synsedimentary tectonic structures, such as faults and the related lithological lateral changes, can be regarded as mechanically important controlling factors in the process of thrust ramp development during positive tectonic inversion processes.  相似文献   

The role of the seismic trigger in the Calitri landslide (Italy): historical reconstruction and dynamic analysis   总被引：2，自引：0，他引：2  

Salvatore Martino  Gabriele Scarascia Mugnozza 《Soil Dynamics and Earthquake Engineering》2005,25(12):933-950

The study covered by this paper was focused on the historical case of the Calitri landslide, which was repeatedly reactivated by earthquakes, as reported since 1694. The town of Calitri (Southern Italy) is located on a ridge whose southern slope, from its top to the Ofanto river valley floor, has been historically affected by major landsliding. The last record of recurrence of the Calitri landslide leads back to the 1980 Irpinia earthquake, which caused significant damage to the town and had pervasive and visible ground effects. Based on a detailed historical reconstruction of landsliding and seismicity at Calitri, the study analysed the current static and dynamic stability of the landsliding slope by means of a finite-difference numerical analysis, taking into account the various factors of landslide initiation and kinematics. The results of the numerical analysis: (i) were consistent with the roto-translational mechanism observed upon the latest reactivation of the landslide; (ii) demonstrated that excess pore pressure redistribution caused a lag between the seismic trigger and the initiation of landsliding; and (iii) showed the impact of seismic input frequency on propagation and depth of slope instability.  相似文献   

From the geological to the numerical model in the analysis of gravity-induced slope deformations: An example from the Central Apennines (Italy)     

A. Maffei  S. Martino  A. Prestininzi 《Engineering Geology》2005,78(3-4):215-236

This paper presents the findings from a study on gravity-induced slope deformations along the northern slope of Mt. Nuria (Rieti-Italy). The slope extends from the village of Pendenza to the San Vittorino plain and hosts the Peschiera River springs, i.e. the most important springs of the Central Apennines (average discharge: about 18 m³/s).

Detailed geological-geomorphological and geomechanical surveys, supported by a site stress-strain monitoring system and laboratory tests, led us to define the main evolutionary features of the studied phenomena. Based on the collected data, a “geological-evolutionary model” was developed with a view to identifying a spatio-temporal correlation between relief forms, jointing of the rock mass and its stress conditions. The geological-evolutionary model was expected to improve numerical simulations and to test our assumptions.

The numerical model also allowed us to simulate changes in the stress-strain conditions of the rock mass and correlate them with jointing, seepage, as well as with site-detected and site-monitored forms and deformations. In particular, significant relations between seepage, tensile stresses within the rock mass, karst solution and collapse of cavities were identified.  相似文献   

Geological mapping reveals the role of Early Jurassic rift architecture in the dispersal of calciturbidites: New insights from the Central and Northern Apennines     

Angelo Cipriani  Martina Caratelli  Massimo Santantonio 《Basin Research》2020,32(6):1485-1509

  相似文献   

Fault geometry and mechanics of marly carbonate multilayers: An integrated field and laboratory study from the Northern Apennines,Italy     

《Journal of Structural Geology》2016

Sealing layers are often represented by sedimentary sequences characterized by alternating strong and weak lithologies. When involved in faulting processes, these mechanically heterogeneous multilayers develop complex fault geometries. Here we investigate fault initiation and evolution within a mechanical multilayer by integrating field observations and rock deformation experiments. Faults initiate with a staircase trajectory that partially reflects the mechanical properties of the involved lithologies, as suggested by our deformation experiments. However, some faults initiating at low angles in calcite-rich layers (θ_i = 5°–20°) and at high angles in clay-rich layers (θ_i = 45°–86°) indicate the important role of structural inheritance at the onset of faulting. With increasing displacement, faults develop well-organized fault cores characterized by a marly, foliated matrix embedding fragments of limestone. The angles of fault reactivation, which concentrate between 30° and 60°, are consistent with the low friction coefficient measured during our experiments on marls (μ_s = 0.39), indicating that clay minerals exert a main control on fault mechanics. Moreover, our integrated analysis suggests that fracturing and faulting are the main mechanisms allowing fluid circulation within the low-permeability multilayer, and that its sealing integrity can be compromised only by the activity of larger faults cutting across its entire thickness.  相似文献   

Impact of early dolomitization on multi-scale petrophysical heterogeneities and fracture intensity of low-porosity platform carbonates (Albian-Cenomanian,southern Apennines,Italy)     

《Marine and Petroleum Geology》2016

Petrographic, petrophysical and fracture analyses were carried out on middle Cretaceous platform carbonates of the southern Apennines (Italy) that represent an outcrop analogue of the Val d’Agri and Tempa Rossa reservoirs of the Basilicata region. The studied outcrops, which are made of interlayered limestones and dolomites of inner platform environment, were selected to study the impact of dolomitization on reservoir properties and the control of dolomite texture on fracture development. Two types of dolomites – both formed during very early diagenesis – were found interlayered, at a metre scale, with micrite-rich limestones (mainly mudstones and wackestones). Dolomite A is fine-to medium crystalline and makes non-planar mosaics. Dolomite B is coarse-crystalline and makes planar-s and planar-e mosaics. The intercrystalline space of the planar-e subtype of dolomite B is either open or filled by un-replaced micrite or by late calcite or saddle dolomite cement. Dolomite A and dolomite B have similar average porosities of 3.7 and 3.1% respectively, which are significantly higher than the average porosity of limestones (1.4%). Their poro-perm relationships are similar, with the notable exception of planar-e type B dolomites, which generally display higher permeability values.The intensity of top bounded fractures is distinctly lower in coarse-crystalline dolomites than in fine-crystalline dolomites and limestones, both at the macro- and the micro-scale. On the other hand neither lithology (i.e. limestone vs. dolomite) nor dolomite crystal size control the intensity of perfect bed-bounded fractures, which is strictly controlled by the fracture layer thickness.Our results provide information that could be used as guidance for the characterization and modelling of fractured carbonate reservoirs made of interlayered limestones and dolomites.  相似文献