首页 | 本学科首页   官方微博 | 高级检索  
     检索      

南岭钨矿“五层楼模式”的结构与构式——以粤北始兴县梅子窝钨矿为例
引用本文:汪劲草,韦龙明,朱文凤,万方良,莫志明.南岭钨矿“五层楼模式”的结构与构式——以粤北始兴县梅子窝钨矿为例[J].地质学报,2008,82(7):894-2008-01-30.
作者姓名:汪劲草  韦龙明  朱文凤  万方良  莫志明
作者单位:桂林工学院资源与环境工程系,广西桂林,541004
基金项目:本文为“十一五”国家科技支撑项目(编号 2006BAB01B034)、全国危机矿山接替资源勘查项目(编号 200644089)、广西自然科学基金项目(编号 桂科自0728221)的成果
摘    要:南岭脉状钨矿的“五层楼模式”,在纵剖面上具正扇形结构,横剖面上具树形分叉结构,平面上沿构造带呈定向脉组(群)分布。从上往下,矿脉分布的分维值(平均1.10)从大变小。认为燕山期含矿岩浆流体沿构造带发生定向的周期性地震泵吸、液压致裂与裂开愈合。对于同一条矿脉,矿脉的扩展速率与扩展时间决定了脉幅的大小:脉幅越大,扩展速率就越小,扩展时间就越长,起始时间也就越早;而脉幅越小,扩展速率也就越大,扩展时间就越短,起始时间也就越晚。认为脉的扩展速率与液压、围压的相对大小有关:当液压一定时,围压越大,则脉的扩展速率就越小;而围压越小,脉的扩展速率就越大。由于各处围压及扩展时间长短的差异,“五层楼”模式中的中部、深部、侧部、上部的矿脉构式、脉幅具有明显的差异:中部单脉出现分支复合,脉幅稳定;侧部单脉出现自然尖灭或单侧分支尖灭、双则分支尖灭;上部则出现复杂的树形分支,分支自然尖灭或分支与分支之间的复合尖灭,深部可能为自然尖灭。

关 键 词:脉状钨矿  五层楼模式  液压致裂  脉的扩展速率  分形结构
收稿时间:2008/1/30 0:00:00
修稿时间:2008/3/20 0:00:00

Texture and Tectonic Style of "Five-storeyed Type" for the Tungsten Deposits in the Nanling Mountains, Southern China——An Example from the Meiziwo Tungsten Deposit
WANG Jincao,WEI Longming,ZHU Wenfeng,WAN Fangliang and MO Zhiming.Texture and Tectonic Style of "Five-storeyed Type" for the Tungsten Deposits in the Nanling Mountains, Southern China——An Example from the Meiziwo Tungsten Deposit[J].Acta Geologica Sinica,2008,82(7):894-2008-01-30.
Authors:WANG Jincao  WEI Longming  ZHU Wenfeng  WAN Fangliang and MO Zhiming
Abstract:The "five-storeyed type" model of the vein-type tungsten deposits in the Nanling Mountains,Southern China,has a normal sector texture on the lengthwise section,a branch-like texture on cross profile,and is distributed along along structural belts in oriented vein groups.With the increase of depth,the fractal dimension of the veins(averaging 1.10) in the Meiziwo tungsten Deposit,Shixing County,decreases gradually.Oriented and periodical earthquake-pumping,hydrofracturing and rupture-healing occurred when the ore-bearing fluid from Yanshanian magma moved along the structural belts..For the same ore vein,the breadth of the vein is determined by its dilation rate and time: the bigger the breadth is the much smaller its dilation rate is,and much longer dilation time is needed and and its starting time is much earlier;or vice versa.The study suggests that the dilation rate has close relation to the relative size between hydraulic pressure and confining pressure: if the hydraulic pressure is given,the larger the confining pressure is,the smaller the dilation rate,or vice versa.The differences of confining pressures and dilation rates here and there make the tectonic styles and the breadth obviously different from each other in the central section,the bottom section,the side section and the top section in the "five-storeyed type".Individual vein in the central section is characterized by continuous composite veins with stable breadth;individual veins in the lateral sections wedges out naturally,or its swithers pinching out either at one side or both sides;complicated treelike swithers appear at the top section with swithers pinching out naturally or composite between swithers pinching out by inches;while at the bottom section,the veins are likely to wedge out naturally.
Keywords:vein-type tungsten deposit  five-storeyed type  hydrofracturing  dilation rate of the ore vein  fractal structure
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《地质学报》浏览原始摘要信息
点击此处可从《地质学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号