首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 765 毫秒
1.
Ultrasonic laboratory measurements of P-wave velocity (Vp) were carried out up to 1.0 GPa in a temperature range of 25–400 °C for crustal and mantle xenoliths of Ichino-megata, northeast Japan. The rocks used in the present study cover a nearly entire range of lithological variation of the Ichino-megata xenoliths and are considered as representative rock samples of the lower crust and upper mantle of the back arc side of the northeast (NE) Honshu arc. The Vp values measured at 25 °C and 1.0 GPa are 6.7–7.2 km/s for the hornblende gabbros (38.6–46.9 wt.% SiO2), 7.2 km/s for the hornblende-pyroxene gabbro (43.8 wt.% SiO2), 6.9–7.3 km/s for the amphibolites (36.1–44.3 wt.% SiO2), 8.0–8.1 km/s for the spinel lherzolites (46.2–47.2 wt.% SiO2) and 6.30 km/s for the biotite granite (72.1 wt.% SiO2). Combining the present data with the Vp profile of the NE Honshu arc [Iwasaki, T., Kato, W., Moriya, T., Hasemi, A., Umino, N., Okada, T., Miyashita, K., Mizogami, T., Takeda, T., Sekine, S., Matsushima, T., Tashiro, K., Miyamachi, H. 2001. Extensional structure in northern Honshu Arc as inferred from seismic refraction/wide-angle reflection profiling. Geophys. Res. Lett. 28 (12), 2329–2332], we infer that the 15 km thick lower crust of the NE Honshu arc is composed of amphibolite and/or hornblende (±pyroxene) gabbro with ultrabasic composition. The present study suggests that the Vp range of the lower crustal layer (6.6–7.0 km/s) in the NE Honshu arc, which is significantly lower than that obtained from various seismic measurements (e.g. the northern Izu-Bonin-Mariana arc: 7.1–7.3 km/s), is due to the thick hydrous lower crustal layer where hornblende, plagioclase and magnetite are dominant.  相似文献   

2.
Tonalitic rocks dredged from the Komahashi-Daini Seamount, northern Kyushu-Palau Ridge are classified as biotite-hornblende tonalites and hornblende tonalites. These rocks have radiometric ages of 37-38 Ma, indicating that felsic plutonic activity occurred during the early stages of Izu-Ogasawara (Bonin)-Mariana (IBM) arc volcanism. Therefore, this tonalite complex has great importance for understanding the initial processes of island arc and continental crust formation. These tonalitic rocks exhibit the following petrological and geochemical characteristics: (1) common lamellar twins and oscillatory zoning patterns in plagioclase phenocrysts throughout the compositional range; (2) hornblende tonalite shows parallel REE patterns and increasing total REE content with increasing SiO2, except for an increasingly strong negative Eu anomaly at higher SiO2 levels; and (3) isotopic composition remains constant over a wide silica variation. We compare this tonalite with younger tonalities of the same arc from the Tanzawa Complex (10-5 Ma), central Japan, considered to represent the lower-middle crust of the IBM arc, and find the following differences: (1) cumulate textures found in Tanzawa tonalites are not observed in samples from the Komahashi-Daini Seamount; and (2) Komahashi-Daini Seamount tonalites, unlike those from Tanzawa, exhibit linear variations of Zr and REEs vs. SiO2 plots. These data and other observations support the interpretation that tonalite in the Komahashi-Daini Seamount was produced by crystal fractionation from basaltic magma. We suggest that fractional crystallization operated during the early stage of oceanic island arc formation to produce tonalite, whereas tonalities in later stages formed largely by partial melting of basaltic lower crust, as represented by the tonalites in the Tanzawa Complex.  相似文献   

3.
A mafic–ultramafic intrusive belt comprising Silurian arc gabbroic rocks and Early Permian mafic–ultramafic intrusions was recently identified in the western part of the East Tianshan, NW China. This paper discusses the petrogenesis of the mafic–ultramafic rocks in this belt and intends to understand Phanerozoic crust growth through basaltic magmatism occurring in an island arc and intraplate extensional tectonic setting in the Chinese Tianshan Orogenic Belt (CTOB). The Silurian gabbroic rocks comprise troctolite, olivine gabbro, and leucogabbro enclosed by Early Permian diorites. SHRIMP II U-Pb zircon dating yields a 427 ± 7.3 Ma age for the Silurian gabbroic rocks and a 280.9 ± 3.1 Ma age for the surrounding diorite. These gabbroic rocks are direct products of mantle basaltic magmas generated by flux melting of the hydrous mantle wedge over subduction zone during Silurian subduction in the CTOB. The arc signature of the basaltic magmas receives support from incompatible trace elements in olivine gabbro and leucogabbro, which display enrichment in large ion lithophile elements and prominent depletion in Nb and Ta with higher U/Th and lower Ce/Pb and Nb/Ta ratios than MORBs and OIBs. The hydrous nature of the arc magmas are corroborated by the Silurian gabbroic rocks with a cumulate texture comprising hornblende cumulates and extremely calcic plagioclase (An up to 99 mol%). Troctolite is a hybrid rock, and its formation is related to the reaction of the hydrous basaltic magmas with a former arc olivine-diallage matrix which suggests multiple arc basaltic magmatism in the Early Paleozoic. The Early Permian mafic–ultramafic intrusions in this belt comprise ultramafic rocks and evolved hornblende gabbro resulting from differentiation of a basaltic magma underplated in an intraplate extensional tectonic setting, and this model would apply to coeval mafic–ultramafic intrusions in the CTOB. Presence of Silurian gabbroic rocks as well as pervasively distributed arc felsic plutons in the CTOB suggest active crust-mantle magmatism in the Silurian, which has contributed to crustal growth by (1) serving as heat sources that remelted former arc crust to generate arc plutons, (2) addition of a mantle component to the arc plutons by magma mixing, and (3) transport of mantle materials to form new lower or middle crust. Mafic–ultramafic intrusions and their spatiotemporal A-type granites during Early Permian to Triassic intraplate extension are intrusive counterparts of the contemporaneous bimodal volcanic rocks in the CTOB. Basaltic underplating in this temporal interval contributed to crustal growth in a vertical form, including adding mantle materials to lower or middle crust by intracrustal differentiation and remelting Early-Paleozoic formed arc crust in the CTOB.  相似文献   

4.
The compressional wave velocities (Vp), pressure derivatives (Vp′) and anisotropy (A) of three types of eclogites and country rocks from the Dabie–Sulu ultrahigh-pressure (UHP) metamorphic belt, China, have been measured under confining pressures up to 800 MPa. Type-1 eclogites, which are coarse-grained and subjected to almost no retrograde metamorphism, experienced recovery-accommodated dislocation creep at peak metamorphic conditions (in the diamond stability field). Type-2 eclogites are fine-grained reworked Type-1 materials that experienced recrystallization-accommodated dislocation creep under quartz/coesite boundary conditions during the early stage of exhumation. Type-3 eclogites are retrogressed samples that were overprinted by significant amphibolite facies metamorphism during a late stage of exhumation within the crust. Type-1 eclogites are richer in Al2O3 and MgO but poorer in SiO2 and Na2O than Type-2 and Type-3 eclogites. Anisotropy of Type-1 and Type-2 eclogites is generally low (<4%) because volumetrically important garnet is elastically quasi-isotropic, while Type-3 eclogites can exhibit high anisotropy (>10%) due to the presence of strongly anisotropic retrograde minerals such as amphibole, plagioclase and mica. The transition of the pressure dependence of velocity from the poroelastic to elastic regimes occurs at a critical pressure (Pc), which depends mainly on the density and distribution of microcracks and in turn on the exhumation history of rocks. The Vp–pressure relationship can be expressed by Vp=a(lnP)2+blnP+c (P≤Pc) and Vp=V0+DP (P≥Pc), where P is the confining pressure, a and b are constants describing the closure of microcracks below Pc, c is the velocity when P is equal to one (MPa), V0 is the projected velocity of a crack-free sample at room pressure, and D is the intrinsic pressure derivative above Pc. When data are curve-fit, pressure derivatives and anisotropy as functions of pressure are determined. The average Vp of the eclogites in the linear regime is 8.42+1.41×10−4P for Type-1, 7.80+1.58×10−4P for Type-2, and 7.33+2.04×10−4P for Type-3, where Vp is in km/s and P in MPa. The decrease in V0 and increase in D from Type-1 to Type-3 eclogites are attributed to a decrease in garnet content and an increase in retrograde minerals. The NE–SW trending, NW-dipping, slab-like high Vp anomaly (8.72 km/s at a depth of 71 km) which extends from the Moho to at least 110 km beneath the Dabie–Sulu region, can be interpreted as the remnant of a subducted slab which is dominated by Type-1 eclogites and has frozen in the upper mantle since about 200–220 Ma. Such relic crustal materials, subducted and preserved as eclogite layers intercalated with felsic gneiss, garnet–jadeite quartzite, marble and serpentinized peridotite, could be responsible for regionally observed seismic reflectors in the upper mantle.  相似文献   

5.
Wadi El-Markh gabbro–diorite complex is composed of pyroxene hornblende gabbros, hornblende gabbros, diorites and quartz diorites. According to their bulk rock geochemistry and mineral chemistry, the gabbroic and dioritic rocks represent fractionates along a single line of descent and crystallized from a calc-alkaline mafic magma. When compared to the primitive mantle, all members of the gabbroic–dioritic rock suite are enriched in the large ion lithophile elements relative to the high field strength elements and display distinctive negative Nb and P2O5 anomalies. This signals an arc setting. Fractionation modeling involving the major elements reveals that the hornblende gabbros were generated from the parent pyroxene hornblende gabbros by 61.86% fractional crystallization. The diorites were produced from the hornblende gabbros by fractional crystallization with a 58.97% residual liquid, whereas the quartz diorites were formed from the diorites by 26.58% fractional crystallization. According to geothermobarometry based on amphibole mineral chemistry, the most primitive pyroxene hornblende gabbros crystallized at ～830 °C/～5 kbar. The crystallization conditions of the quartz diorites were estimated at ～570 °C/～2 kbar. In consequence the Wadi El-Markh gabbro–diorite complex represents a single magmatic suite of which fractionates crystallized in progressively shallower levels of an arc crust.  相似文献   

6.
The Hidaka Collision Zone (HCZ), central Hokkaido, Japan, is a good target for studies of crustal evolution and deformation processes associated with an arc–arc collision. The collision of the Kuril Arc (KA) with the Northeast Japan Arc (NJA), which started in the middle Miocene, is considered to be a controlling factor for the formation of the Hidaka Mountains, the westward obduction of middle/lower crustal rocks of the KA (the Hidaka Metamorphic Belt (HMB)) and the development of the foreland fold-and-thrust belt on the NJA side. The “Hokkaido Transect” project undertaken from 1998 to 2000 was a multidisciplinary effort intended to reveal structural heterogeneity across this collision zone by integrated geophysical/geological research including seismic refraction/reflection surveys and earthquake observations. An E–W trending 227 km-long refraction/wide-angle reflection profile found a complicated structural variation from the KA to the NJA across the HCZ. In the east of the HCZ, the hinterland region is covered with 4–4.5 km thick highly undulated Neogene sedimentary layers, beneath which two eastward dipping reflectors were imaged in a depth range of 10–25 km, probably representing the layer boundaries of the obducting middle/lower crust of the KA. The HMB crops out on the westward extension of these reflectors with relatively high Vp (>6.0 km/s) and Vp/Vs (>1.80) consistent with middle/lower crustal rocks. Beneath these reflectors, more flat and westward dipping reflector sequences are situated at the 25–27 km depth, forming a wedge-like geometry. This distribution pattern indicates that the KA crust has been delaminated into more than two segments under our profile. In the western part of the transect, the structure of the fold-and-thrust belt is characterized by a very thick (5–8 km) sedimentary package with a velocity of 2.5–4.8 km/s. This package exhibits one or two velocity reversals in Paleogene sedimentary layers, probably formed by imbrication associated with the collision process. From the horizontal distribution of these velocity reversals and other geophysical/geological data, the rate of crustal shortening in this area is estimated to be greater than 3–4 mm/year, which corresponds to 40–50% of the total convergence rate between the NJA and the Eurasian Plate. This means that the fold-and-thrust belt west of the HCZ is absorbing a large amount of crustal deformation associated with plate interaction across Hokkaido Island.  相似文献   

7.
We investigated mafic–ultramafic rocks distributed in the Timor–Tanimbar region as a possible modern analogue for the Mediterranean-type ophiolites in the Tethyan system. The geological occurrence suggests that the buoyant subduction of Australian continent uplifted the fragments of newly formed mantle–crust section, which extends to the neighboring preemplaced forearc marginal basins. However, we recognized a large variety of igneous features, which is consistent with the lack of complete succession and the presence of abundant crosscutting structures. All peridotite masses in Timor (Mutis, Atapupu and Dili) are mostly fertile (lherzolitic) in compositions. In addition, we found depleted harzburgite, highly refractory dunite and olivine websterite to occur as minor constituents, which display compositional contrast to those of the lherzolites. Structurally overlying Ocussi volcanics resemble island–arc tholeiite in terms of trace element characteristics, apparently inconsistent with genetic relationship with Timor lherzolite masses. In eastern small islands (Moa and Dai), all types of ophiolitic rocks display varying degrees of island–arc affinities. Cumulate origin of wehrlite and gabbroic rocks in Dai is marked by early crystallization of clinopyroxene and common occurrence of high-calcic plagioclase. Dikes cutting the gabbro sequence have weak island–arc signatures relative to those of Ocussi volcanics. Mildly depleted lherzolite–harzburgite in Moa was intruded by high-Mg andesitic magma, which crystallized hornblende gabbro containing high-Mg orthopyroxene. These petrological and geochemical variations can be best explained by the combination of (1) a temporal change of igneous activity possibly associated with development of forearc basin and (2) the emplacement of spatially different forearc regions in each locality. Unusual occurrence of fertile lherzolite in the forearc setting, generation of high-Mg andesite magmatism, inverted metamorphic grade recorded from associated metamorphic rocks, and formation of marginal basins may be linked to the injection of high-temperature asthenospheric materials into the mantle wedge.  相似文献   

8.
Gabbroic intrusions of the El-Aradiya area are a part of the Neoproterozoic basement cropping out in the central Eastern Desert of Egypt. They are composed mainly of gabbroic cumulates (diopside-plagioclase cumulate and plagioclase-augite cumulate) and fine-grained noncumulate gabbro. Mineral chemistry data indicate that the plagioclase core compositions of the gabbroic cumulates range between An90 and An60, whereas fine-grained noncumulate gabbro plagioclase core compositions are An61−56 and rim compositions are An54−42. The clinopyroxenes are diopside and augite in the gabbroic cumulate, and augite in the fine-grained noncumulate gabbro. Chemical re-equilibration between pyroxenes of gabbroic cumulates vary from 1150-900°C and for fine-grained noncumulate gabbro range from 1200-1100°C. The amphiboles are calcic, varying from tschermakite and tschermakitic hornblende, and Mg-hornblende in the gabbroic cumulate and only Mg-hornblende in the fine-grained noncumulate gabbro. They indicate an island-arc tholeiitic setting for gabbroic intrusions of the El-Aradiya area. Major and trace element data suggest arc tholeiite characters, a comagmatic suite and subduction-related magma with enrichment of LILE and depletion in HFSE relative to MORB. The estimated parent magma is similar to tholeiitic Aleutian arc primary magma. The gabbroic intrusions are analogous to intrusions emplaced in an immature island-arc setting in which the oceanic crust was thin.  相似文献   

9.
The Wadi Dabr intrusive complex, west of Mersa-Alam, Eastern Desert, Egypt ranges in composition from gabbro to diorite, quartz diorite and tonalite. The gabbroic rocks include pyroxene-horn blend e gabbro, hornblende gabbro, quartz-hornblende gabbro, metagabbro and amphibolite. Mineral chemistry data for the gabbroic rocks indicate that the composition of clinopyroxenes ranges from diopside to augite and the corresponding magma is equivalent to a volcanic-arc basalt. Plagioclase cores range from An75 to An34 for the gabbroic varieties, except for the metagabbro which has An 11–18. The brown amphiboles are primary phases and classified as calcic amphiboles, which range from tschermakitic hornblende to magnesiohornblende. Green hornblende and actinolite are secondary phases. Hornblende barometry and hornblende-plagioclase themometry for the gabbroic rocks estimate crystallisation conditions of 2–5 kb and 885–716°C.The intrusive rocks cover an extensive silica range (47.86–72.54 wt%) and do not exhibit simple straight-line variation on Harker diagrams for many elements (e.g. TiO2, Al2O3, FeO*, MgP, CaO, P2O5, Cr, Ni, V, Sr, Zr and Y). Most of these elements exhibit two geochemical trends suggesting two magma sources.The gabbroic rocks are relatively enriched in large ion lithophile elements (K, Rb, Sr and Ba) and depleted in high field strength elements (Nb, Zr, Ti and Y) which suggest subduction-related magma. Rare earth element (REE) data demonstrate that the gabbroic rocks have a slight enrichment of light REE [(La/Yb)N=2.67−3.91] and depletion of heavy REE ((Tb/Yb)N=1.42−1.47], which suggest the parent magma was of relatively primitive mantle source.The diorites and tonalites are clearly calc-alkaline and have negative anomalies of Nb, Zr, and Y which also suggest subduction-related magma. They are related to continental trondhjemites in terms of Rb---Sr, K---Na---Ca, and to volcanic-arc granites in terms of Rb---and Nb---Y.The Wadi Dabr intrusive complex is analogous to intrusions emplaced in immature ensimatic island-arcs and represents a mixture of mantle (gabbroic rocks) and crustal fusion products (diorites and tonalites) modified by fractional processes.  相似文献   

10.
A geochemical and isotopic study was carried out for the Mesozoic Yangxin, Tieshan and Echeng granitoid batholiths in the southeastern Hubei Province, eastern China, in order to constrain their petrogenesis and tectonic setting. These granitoids dominantly consist of quartz diorite, monzonite and granite. They are characterized by SiO2 and Na2O compositions of between 54.6 and 76.6 wt.%, and 2.9 to 5.6 wt.%, respectively, enrichment in light rare earth elements (LREE) and large ion lithophile elements (LILE), and relative depletion in Y (concentrations ranging from 5.17 to 29.3 ppm) and Yb (0.34–2.83 ppm), with the majority of the granitoids being geochemically similar to high-SiO2 adakites (HSA). Their initial Nd (εNd = − 12.5 to − 6.1) and Sr ((87Sr/86Sr)i = 0.7054–0.7085) isotopic compositions, however, distinguish them from adakites produced by partial melting of subducted slab and those produced by partial melting of the lower crust of the Yangtze Craton in the Late Mesozoic. The granitoid batholiths in the southeastern Hubei Province exhibit very low MgO ranging from 0.09 to 2.19 wt.% with an average of 0.96 wt.%, and large variations in negative to positive Eu anomalies (Eu/Eu = 0.22–1.4), especially the Tieshan granites and Yangxin granite porphyry (Eu/Eu = 0.22–0.73). Geochemical and Nd–Sr isotopic data demonstrate that these granitoids originated as partial melts of an enriched mantle source that experienced significant contamination of lower crust materials and fractional crystallization during magma ascent. Late Mesozoic granitoids in the southeastern Hubei Province of the Middle–Lower Yangtze River belt were dominantly emplaced in an extensional tectonic regime, in response to basaltic underplating, which was followed by lithospheric thinning during the early Cretaceous.  相似文献   

11.
The (late syn)- post-collisional magmatic activities of western and northwestern Anatolia are characterized by intrusion of a great number of granitoids. Amongst them, Baklan Granite, located in the southern part of the Muratdağı Region from the Menderes Massif (Banaz, Uşak), has peculiar chemical and isotopic characteristics. The Baklan rocks are made up by K-feldspar, plagioclase, quartz, biotite and hornblende, with accessory apatite, titanite and magnetite, and include mafic microgranular enclaves (MME). Chemically, the Baklan intrusion is of sub-alkaline character, belongs to the high-K, calc-alkaline series and displays features of I-type affinity. It is typically metaluminous to mildly peraluminous, and classified predominantly as granodiorite in composition. The spider and REE patterns show that the rocks are fractionated and have small negative Eu anomalies (Eu/Eu* = 0.62–0.86), with the depletion of Nb, Ti, P and, to a lesser extent, Ba and Sr. The pluton was dated by the K–Ar method on the whole-rock, yielded ages between 17.8 ± 0.7 and 19.4 ± 0.9 Ma (Early Miocene). The intrusion possesses primitive low initial 87Sr/86Sr ratios (0.70331–0.70452) and negative εNd(t) values (−5.0 to −5.6). The chemical contrast between evolved Baklan rocks (SiO2, 62–71 wt.%; Cr, 7–27 ppm; Ni, 5–11 ppm; Mg#, 45–51) and more primitive clinopyroxene-bearing monzonitic enclaves (SiO2, 54–59 wt.%; Cr, 20–310 ppm; Ni, 10–70 ppm; Mg#, 50–61) signifies that there is no co-genetic link between host granite and enclaves. The chemical and isotopic characteristics of the Baklan intrusion argue for an important role of a juvenile component, such as underplated mantle-derived basalt, in the generation of the granitoids. Crustal contamination has not contributed significantly to their origin. However, with respect to those of the Baklan intrusion, the generation of the (late syn)- post-collisional intrusions with higher Nd(t) values from the western Anatolia require a much higher amount of juvenil component in their source domains.  相似文献   

12.
One in-line wide-angle seismic profile was conducted in 1990 in the course of the Southeastern China Continental Dynamics project aimed at the study of the contact between the Cathaysia block and the Yangtze block. This 380-km-long profile extended in NW–SE direction from Tunxi, Anhui Province, to Wenzhou, Zhejiang Province. Five in-line shots were fired and recorded at seismic stations with spacing of about 3 km along the recording line. We have used two-dimensional ray tracing to model P- and S-wave arrivals and provide constraints on the velocity structure of the upper crust, middle crust, lower crust, Moho discontinuity, and the top part of the lithospheric mantle. P-wave velocity, S-wave velocity and VP/VS ratio are mapped. The crust is 36-km thick on average, albeit it gradually thins from the northwest end to the southeast end (offshore) of the profile. The average crustal velocity is 6.26 km/s for P-waves but 3.6 km/s for S-waves. A relatively narrow low-velocity layer of about 4 km of thickness, with P- and S-wave velocities of 6.2 km/s and 3.5 km/s, respectively, marks the bottom of the middle crust at a depth of 23-km northwest and 17-km southeast. At the crust–mantle transition, the P- and S-wave velocity change quickly from 7.4 to 7.8 km/s (northwest) and 8.0 to 8.2 km/s (southeast) and from 3.9 to 4.2 km/s (northwest) and 3.9 to 4.5 km/s (southeast), respectively. This result implies a lateral contrast in the upper mantle velocity along the 140 km sampled by the profile approximately. The average VP/VS ratio ranges from 1.68–1.8 for the upper crust to 1.75 for the middle and 1.75–1.85 for lower crust. With the interpretation of the wide-angle seismic data, Jiangshan–Shaoxin fault is considered as the boundary between the Yangtze and the Cathaysia block.  相似文献   

13.
The transition zone between Archean low- and high-grade rocks in southern India represents eroded crustal levels representative of 15–20 km. It is comprised chiefly of tonalitic gneisses with some varieties showing incipient charnockitization and of minor amounts of granitic gneiss and charnockite, both of which appear to have developed from the tonalitic gneisses.Tonalitic gneisses and charnockites are similar in major and trace elements composition while granitic gneisses are relatively enriched in Rb, K, Th, Ba and light rare earth element (REE) and depleted in Cr and Sc. All three rock types exhibit enriched light REE patterns with variable positive Eu anomalies. Total REE content decreases with increasing Eu/Eu and SiO2 and with decreasing Fe2O3T and MgO in the tonalitic gneisses and charnockites.An internally consistent model for the production of the tonalitic gneisses involves partial melting of an enriched mafic source with variable ratios of hornblende to clinopyroxene. This source, in turn, is derived from an ultramafic mantle relatively enriched in incompatible elements. Granitic gneisses form from tonalitic gneisses by alkali metasomatism from chloride-bearing fluids with high H2O/CO2 ratios purged from the lower crust by CO2, and charnockites are produced from tonalitic gneisses (and granitic gneisses) by ischochemical CO2 metamorphism following the alkali metasomatism.  相似文献   

14.
Cenka Christova   《Tectonophysics》2004,384(1-4):175-189
The study addresses the space distribution of the stress field in the Kyushu–Ryukyu Wadati–Benioff zone based on homogeneous data of earthquake focal mechanisms and the inverse technique by Gephart and Forsyth [J. Geophys. Res. 89 (1984) 9305]. The used data set consists of 148 Harvard CMT solutions and 22 earthquake focal mechanisms listed in previous studies. The stress field parameters are determined for 0–40, 41–100 and h>100 km depth ranges. The top 100-km layer of the Wadati–Benioff zone (WBZ) is characterized by strike normal maximum compression σ1 and steeper than the slab minimum compression σ3, the last indicating for unbalanced slab pull force. The Tokara channel ‘divides’ the subduction into two parts of different stress regime at depth greater than 100 km. To the south of the channel the slab is under slab parallel σ1 and slab normal σ3 while its northern part, beneath Kyushu, is under slab parallel extension and slab normal compression. The results of recent studies on the regional velocity structure and geochemistry of the volcanic lava indicate that the most plausible reason for the observed stress field difference below 100 km in the northern and rest part of the arc is the presence of hot low viscosity upper mantle west of Kyushu.The results of this study indicate that the forces involved in the contemporary subduction dynamics in the Ryukyu–Kyushu Wadati–Benioff zone are related to the convergence between the Philippine Sea Plate and the Eurasian plate, the trench suction force, slab pull, the slab anchor force and, in the southern-central part of the arc, mantle resistance.  相似文献   

15.
This paper presents new petrographic observations and geochemical and microprobe analyses for the Laomiaojishan, Xiaotongguanshan, and Tianebaodanshan intrusions in the Tongguanshan mineral district, East China. The plutons vary in composition from quartz monzonitic diorite to pyroxene monzonitic diorite, and contain gabbroic to dioritic xenoliths. The Xiaotongguanshan intrusion yields a SHRIMP zircon U–Pb age of 139.5±2.9 Ma, indicating Late Jurassic to Early Cretaceous magmatism in the Lower Yangtze River Valley. Relative to host rocks, the gabbro and diorite xenoliths are low in SiO2 (52.03–54.61 wt‐%), Al2O3 (12.87–14.43 wt‐%), and total alkalis (Na2O+K2O; 5.26–6.30 wt‐%), but high in MgO (5.41–11.66 wt‐%); the host rocks have high SiO2 (59.97–64.44 wt‐%), Al2O3 (16.43–17.59 wt‐%), and total alkalis (6.67–8.25 wt‐%), but are low in MgO (1.52–2.50 wt‐%). Concentrations of rare earth elements (REEs) in the xenoliths (165.70–190.40 ppm) are similar to those in the host rocks (166.12–185.95 ppm), although the ratio of light REEs to heavy REEs in the xenoliths (3.39–4.27) is lower than that in the host plutons (4.86–5.94). All of the analysed rocks show similar REE patterns, although the xenoliths display marked positive Eu anomalies and the host rocks show slightly negative Eu anomalies. Values of epsilon Nd (t) ranges from ?4.9 to ?9.9 in the gabbro xenoliths and from ?11.4 to ?11.9 in the host intrusives. Initial 87Sr/86Sr ratios are 0.7064–0.7073 in the xenoliths and 0.7072–0.7084 in the quartz monzonitic diorite host rocks. Crystallization temperatures of hornblende and plagioclase in the gabbro xenoliths, diorite xenoliths, and host rocks are 816, 773–790, and 664–725°C, respectively, based on an amphibole–plagioclase geothermometer. The pressures recorded by these phases indicate that they formed at depths of 26, 12–15, and 3–4 km, respectively, based on an aluminum‐in‐hornblende geobarometer. The petrological and geochemical features of the analysed intrusions and xenoliths are consistent with their derivation from basic to intermediate‐acidic magmas that possibly formed via a series of complex interactions between underplated, mantle‐derived basaltic magma and varying amounts of middle‐ to lower‐crustal material, followed by assimilation–fractional crystallization.  相似文献   

16.
The crustal structure along a 312 km transect, stretching from the axial mountains of the North Atlantic Knipovich Ridge to the continental shelf of Svalbard, has been obtained using seismic reflection data and wide angle OBS data. The resulting seismic Vp and Vs models are further constrained by a 2-D-gravity model. The principal objective of this study is to describe and resolve the physical and compositional properties of the crust in order to understand the processes and creation of oceanic crust in this extremely slow-spreading counterpart of the North Atlantic Ridge Systems. Vp is estimated to be 3.50–6.05 km/s for the upper oceanic crust (oceanic layer 2), with a marked increase away from the ridge. The measured Vp of 6.55–6.95 km/s for oceanic layer 3A and 7.10–7.25 km/s for layer 3B, both with a Vp/Vs ratio of 1.81, except for slightly higher values at the ridge axis, does not allow a clear distinction between gabbro and mantle-derived peridotite (10–40% serpentized). The thickness of the oceanic crust varies a lot along the transect from the minimum of 5.6 km to a maximum of 8.1 km. The mean thickness of 6.7 km for the oceanic crust is well above the average thickness for slow-spreading ridges (<10 mm/year half-spreading rate). The areas of increased thickness could be explained by large magma production-rates found in the zones of axial highs at the ridge axis, which also have generated the off-axial highs adjacent the ridge. We suggest that these axial and off-axial highs along the ridge control the lithological composition of the oceanic crust. This approach suggests normal gabbroic oceanic crust to be found in the areas bound by the active magma segments (the axial and off-axial highs) and mantle-derived peridotite outside these zone.  相似文献   

17.
The Teplá–Barrandian unit (TBU) of the Bohemian Massif shared a common geological history throughout the Neoproterozoic and Cambrian with the Avalonian–Cadomian terranes. The Neoproterozoic evolution of an active plate margin in the Teplá–Barrandian is similar to Avalonian rocks in Newfoundland, whereas the Cambrian transtension and related calc-alkaline plutons are reminiscent of the Cadomian Ossa–Morena Zone and the Armorican Massif in western Europe. The Neoproterozoic evolution of the Teplá–Barrandian unit fits well with that of the Lausitz area (Saxothuringian unit), but is significantly distinct from the history of the Moravo–Silesian unit.The oldest volcanic activity in the Bohemian Massif is dated at 609+17/−19 Ma (U–Pb upper intercept). Subduction-related volcanic rocks have been dated from 585±7 to 568±3 Ma (lower intercept, rhyolite boulders), which pre-dates the age of sedimentation of the Cadomian flysch ( t chovice Group). Accretion, uplift and erosion of the volcanic arc is documented by the Neoproterozoic Dob í conglomerate of the upper part of the flysch. The intrusion age of 541+7/−8 Ma from the Zgorzelec granodiorite is interpreted as a minimum age of the Neoproterozoic sequence. The Neoproterozoic crust was tilted and subsequently early Cambrian intrusions dated at 522±2 Ma (T ovice granite), 524±3 Ma (V epadly granodiorite), 523±3 Ma (Smr ovice tonalite), 523±1 Ma (Smr ovice gabbro) and 524±0.8 Ma (Orlovice gabbro) were emplaced into transtensive shear zones.  相似文献   

18.
Crustal structure across the passive continental margin of the northeastern South China Sea (SCS) is presented based on a deep seismic survey cooperated between Taiwan and China in August 2001. Reflection data collected from a 48-hydrophone streamer and the vertical component of refraction/reflection data recorded at 11 ocean-bottom seismometers along a NW–SE profile are integrated to image the upper (1.6–2.4 km/s), lower (2.5–2.9 km/s), and compacted (3–4.5 km/s) sediment, the upper (4.5–5.5 km/s), middle (5.5–6.5 km/s) and lower (6.5–7.5 km/s) crystalline crust successively. The velocity model shows that the thickness (0.5–3 km) and the basement of the compacted sediment are strongly varied due to intrusion of the magma and igneous rocks after seafloor spreading of the SCS. Furthermore, several volcanoes and igneous rocks in the upper/middle crust (7–10 km thick) and a high velocity layer (0–5 km thick) in the lower crust of the model are identified as the ocean–continent transition (OCT) below the lower slope in the northeastern margin of the SCS. A thin continent NW of the OCT and a thick oceanic crust SE of the OCT in the continental margin of the northeastern SCS are also imaged, but these transitional crusts cannot be classified as the OCT due to their crustal thickness and the limited amount of the volcano, the magma and the high velocity layer. The extended continent, next to the gravity low and a sag zone extended from the SW Taiwan Basin, may have resulted from subduction of the Eurasian Plate beneath the Manila Trench whereas the thick oceanic crust may have been due to the excess volcanism and the late magmatic underplating in the oceanic crust after seafloor spreading of the SCS.  相似文献   

19.
ABSTRACT

A Paleogene accretionary complex, the Mineoka–Setogawa belt is distributed adjacent to the northern portion of the collision zone between Honshu and Izu–Bonin–Mariana (IBM) arcs in central Japan, comprising a mélange of ophiolitic fragments of various sizes. The Eocene-Oligocene plutonic rocks in this belt (gabbro, diorite, and tonalite) have been interpreted as fragments brought from the deep crust beneath the IBM arc through tectonic collisions. The geochemical characteristics of the gabbro and associated basaltic dike are similar to those of the Eocene IBM tholeiitic basalt; thus, the gabbro was likely formed via the crystallization of the Eocene tholeiitic basaltic magmas, which was produced by the partial meltings of a depleted mantle wedge. A comparison with experimental results and geochemical modeling indicates that the tonalite was generated by 10–30% dehydration melting of the gabbro. Actually, Eocene–Oligocene felsic veins, which are coeval with the plutonic rocks, occur in the Mineoka–Setogawa gabbro. Plagioclase crystals in the diorite comprise Ca-rich and -poor parts in a single crystal. Their compositional characteristics are consistent with those of plagioclase in the gabbro and tonalite, respectively. The textures and chemical composition of plagioclase indicate that the diorite was formed by the mixing between mafic and silicic magmas. The whole-rock composition of the diorite also indicates the evidence for the mixing between basaltic magmas which were fractionated to variable degrees and homogeneous silicic magma. The mixing model proposed from the first direct observations of the IBM middle crust exposed on the Mineoka–Setogawa belt is applied to the genesis of the Eocene to present intermediate rocks in the IBM arc. If the continental crust were created at intra-oceanic arc settings such as the IBM arc, the magma mixing model would be one of the most likely mechanisms for the genesis of the continental crust.  相似文献   

20.
Two natural, low K2O/Na2O, TTG tonalitic gneisses (one hornblende-bearing and the other biotite-bearing) were partially melted at 0.8–1.2 GPa (fluid-absent). The chief melting reactions involve the breakdown of the biotite and hornblende. The hornblende tonalite is slightly less fertile than the biotite tonalite, but melt volumes reach around 30% at 1,000°C. This contrasts with results of most previous work on more potassic TTGs, which generally showed much lower fertility, though commonly producing more potassic melts. Garnet is formed in biotite-bearing tonalitic protoliths at P > 0.8 GPa and at > 1.0 GPa in hornblende-bearing tonalitic protoliths. All fluid-absent experiments produced peraluminous granitic to granodioritic melts, typically with SiO2 > 70 wt.%. For the biotite tonalite, increasing T formed progressively more melt with progressively lower K2O/Na2O. However, the compositions of melts from the hornblende tonalite do not vary significantly with T. With increasing P, melts from the biotite tonalite become less potassic, due to the increasing thermal stability of biotite. For the hornblende tonalite, again there is no consistent trend. Fluid-absent melting of sodic TTGs produces melts with insufficient K2O to model the magmas that formed the voluminous, late, potassic granites that are common in Archaean terranes. Reconnaissance fluid-present experiments at 0.6 GPa imply that H2O-saturated partial melting of TTGs is also not a viable process for producing magmas that formed these granites. The protoliths for these must have been more potassic and less silicic. Nevertheless, at granulite-facies conditions, sodic TTGs will produce significant quantities of broadly leucogranodioritic melt that will be more potassic than the protoliths. Upward abstraction of this melt would result in some LILE depletion of the terrane. Younger K-rich magmatism is unlikely to represent recycling of TTG crust on its own, and it seems most likely that evolved crustal rocks and/or highly enriched mantle must be involved. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号