首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Abstract

This study tests the hypothesis that the in situ void ratio of surficial marine sediments may be predicted from shear wave velocity-depth data with a reliability equal to that of other methods currently available. Shear wave velocity is fundamentally controlled by the number of grain-to-grain contacts per unit volume of material and by the effective stress across those contacts. In this study, three previously established empirical formulae are used to predict void ratio from velocity-depth data. Field data were acquired along a transect off the northern Californian coast across which water depth increased from 35 to 70 m and seafloor sediment type varied from sand to silty-sand, respectively. A towed seafloor sled device was used to collect shear wave refraction data, and a marked, systematic decrease in velocity was observed along the line, ranging from 35–70 m/s for the coarse, near-shore material to 25–40 m/s for the finer, offshore deposits. Void ratios predicted from these velocities were compared with data measured directly from box-core samples. Of the formulae used for prediction, two agree remarkably well with the control data. Both predicted and control values increase from 0.6–0.8 for the sandy material to 1.1–1.5 for the silty-sand. Thus, this study does not disprove the hypothesis set and demonstrates the potential of field shear wave velocity-depth data as a means of delineating spatial variation in void ratio for surficial marine sediments in a remote, nondestructive manner.  相似文献   

2.
A brief review of the published evidence of current deposits around Italy is the occasion to test the robustness of matching bottom current velocity models and seafloor morphologies to identify contourite drifts not yet documented. We present the result of the regional hydrodynamic model MARS3D in the Northern Tyrrhenian and Ligurian Sea with horizontal resolution of 1.2 km and 60 levels with focus on bottom current: data are integrated over summer and winter 2013 as representative of low and high intensity current conditions.The Eastern Ligurian margin is impacted by the Levantine Intermediate Water (LIW) with modeled mean velocity of bottom current up to 20 cm s−1 in winter 2013 and calculated bottom shear stress exceeding 0.2 N m−2 in water depth of 400–800 m. By crossing this information with seafloor morphology and geometry of seismic reflections, we identify a sediment drift formerly overlooked at ca 1000 m water depth. The Portofino separated mounded drift has a maximum thickness of at least 150 m and occurs in an area of mean current velocity minimum. Independent evidence to support the interpretation include bottom current modelling, seafloor morphology, seismic reflection geometry and sediment core facies. The adjacent areas impacted by stronger bottom currents present features likely resulted from bottom current erosion such as a marine terrace and elongated pockmarks.Compared to former interpretation of seafloor morphology in the study area, our results have an impact on the assessment of marine geohazards: submarine landslides offshore Portofino are small in size and coexist with sediment erosion and preferential accumulation features (sediment drifts) originated by current-dominated sedimentary processes. Furthermore, our results propel a more general discussion about contourite identification in the Italian seas and possible implications.  相似文献   

3.
Acouso-physical properties of sea floor sediments in the southeast offshore sea area of Hainan Island on the northern continental shelf of the South China Sea are analyzed. In many cruises, conductivity-temperature-depth measurements of seawater, measurements of shallow stratum and side-scan sonar have been made. Acoustic parameters, basic sedimentary parameters, physical-mechanical parameters and 14C age, etc., have been measured. The sediment elastic parameters, including Young's modulus, bulk modulus, constrained modulus, rigidity modulus, Poisson's ratio, Lames constant, etc., have been calculated. Results show that the compression wave velocity of the seafloor sediment in the sea area ranges from 1474–1700 m/s, and there are high and low sound velocity sediment types in the different sea areas; the shear wave velocity is 150–600 m/s; at 100 kHz the sediment sound attenuation is 35–260 dB/m, the sediment density is 1.4–2.0 g/cm3; the sediment porosity is 42–88%. Sound field parameters and describing sound reciprocity between sea and seafloor are described.  相似文献   

4.
分析研究了南海北部大陆架西南缘的海南岛东南外海海底沉积物声学物理特性,在多个航次中进行了海底沉积层取样、海水CTD测量、浅地层及旁侧声呐扫测等工作.在实验室里对沉积物样品进行声学参数、沉积学基本参数、物理力学参数和14C年龄测试等分析.根据多尔特曼公式求解出弹性模量、体积弹性模量、压缩系数、切变模量、泊松比和拉梅常数等六项沉积物弹性参数.分析结果表明在该海区海底沉积物的压缩波速为1.474~1.700 m/s,在不同的海区内有高低声速两类性质的沉积物分布;沉积物的切变波速为150~600 m/s;沉积物在100 kHz的声衰减为35~260 dB/m;沉积物的密度为1.4~2.0 g/cm3;沉积物的孔隙度为42%~88%.  相似文献   

5.
Abstract

The vast shallow sea off the Pearl River mouth in the northern South China Sea is an important prospecting area for offshore oil development. In recent years, the authors have investigated acoustic and geotechnical characteristics of marine sediments in this area. An intercalated layer of low sound velocity and low compressive strength has been found within the seabed, in which the median diameter of sediment grains is fine and the sound velocity is 100–200 m/s lower than that of the overlying and underlying layers. The minimum unconfined compressive strength of this layer is 0.075 kg/cm2, which is lower than that of the over‐ and underlying layers by an order of magnitude. Such an intercalation often constitutes a threat to the stability of shallow foundation soil. In case of overloading, the layer may be weakened, and seafloor sliding between different sediment layers may occur. The regional distribution of these kinds of weak intercalations of low sound velocity may be traced by a subbottom profiler and by means of sediment acoustical investigations.

Correlation between the gray level of a layer on subbottom profile records and physical properties of the layer (including sound velocity and reflectivity) suggests that the layer of sufficient bearing capacity must be searched by means of sediment acoustics at least to the depth of a high‐velocity substratum of stronger reflection.  相似文献   

6.
This study was undertaken to investigate the implication of geoacoustic behaviors in the shallow marine sediments associated with the changes in geotechnical index properties. Two piston cores (270 cm and 400 cm in core length) used in this study were recovered from stations 1 and 2, the western continental margin, the East Sea. Scanning electron microscopy (SEM) was employed to illustrate the effects of microstructure on shear properties. The direct SEM observation of sediment fabrics is inevitable to understand the correlation of the changes in geoacoustic properties to the sediment structure. The consolidation of sediments by overburden stress resulting in the clay fabric alteration appears to play an important role in changing shear properties. Water contents and porosity of sediments gradually decreases with increasing depth, whereas wet bulk density shows a reverse trend. It is interesting to note that shear wave velocities increase rapidly from 8 to 20 m/s while compressional wave velocities significantly fluctuate, ranging from 1450 to 1550 m/s with depth. The fabric changes in sediment with increasing depth for example, uniform grain size and well oriented clay fabrics may cause the shear strength increase from 1 to 12 kPa. Shear wave velocity is, therefore, shown to be very sensitive to the changes in undrained strength for unconsolidated marine sediments. This correlation allows an in-situ estimation of shear stress in the subsurface from shear wave velocity data.  相似文献   

7.
A Preliminary Study of Shear Wave in Seafloor Surface Sediments   总被引：1，自引：0，他引：1  
This article preliminarily reports and analyses the transmission characteristics and behaviors of shear wave in the offshore seafloor surface sediments in China, discusses the relationships between the physical and mechanical features of the shear wave and the compression wave, and compares the testing results with that of Hamilton and Chen et al. The result shows that the shear wave can be tested if the seafloor surface sediment has tangent modulus. The shear wave velocity ranges from 50-600 m/s and the measuring frequency from 50-200 kHz. The sound velocity rate of shear wave and compression wave can be used to appraise the stress-strain feature of seafloor surface sediments. This study provides a basis for further describing and appraising the seafloor sedimentary acoustic-mechanical feature and building a geological-acoustic model on China's offshore sea area.  相似文献   

8.
Gravity installed anchors (GIAs) are released from a height of 30–150 m above the seabed, achieving velocities up to 19–35 m/s at the seabed, and embed to depths of 1.0–2.4 times the anchor length. Challenges associated with GIAs include the prediction of anchor initial embedment depth, which determines the holding capacity of the anchor. Based on the coupled Eulerian–Lagrangian approach, a numerical framework is proposed in this paper to predict the embedment depth of GIAs, considering the effects of soil strain rate, soil strain-softening and hydrodynamic drag (modeled using a concentrated force), with the anchor-soil friction described appropriately. GIAs are influenced by the hydrodynamic drag before penetrating into the soil completely, hence the anchor accelerates less than the previous investigations in shallow penetration, even decelerates directly at the terminal impact velocity. The hydrodynamic drag has more influence on OMNI-Max anchors (with an error of ∼4.5%) than torpedo anchors, and the effect becomes more significant with increasing impact velocity. An extensive parametric study is carried out by varying the impact velocity, strain rate and strain-softening parameters, frictional coefficient, and soil undrained shear strength. It is concluded that the dominant factor affecting the penetration is the soil undrained shear strength, then are the impact velocity, strain rate dependency and frictional coefficient, and the minimal is the strain-softening of soil. In addition, although the strain rate dependency is partly compensated by the softening, the anchor embedment depth accounting for the effects of strain rate and strain-softening is lower than that for ideal Tresca soil. Strain rate dependency dominates the combined effects of strain rate and strain-softening in the dynamic installation of GIAs, on which should pay more attention, especially for the calibration of the related parameters and the measured solutions. In the end, the theoretical model based on the bearing resistance method is extended by accounting for the hydrodynamic drag effect.  相似文献   

9.
This paper presents a predictive model for undrained penetration of cylinders into soft seafloor soils. The penetration depth will depend on the velocity of the cylinder as it touches down at the seafloor, and the net deceleration of the cylinder as it is acted on by forces of self-weight, soil buoyancy, and soil-shearing resistance. The soil-shearing resistance force increases as a function of penetration depth and, due to the dependence of undrained shear strength on strain rate, penetration velocity. This paper presents finite element (FE) simulations that quantify both effects and form the basis of a simplified soil-resisting force model. Strain-rate effects are modeled within a framework of rate-dependent plasticity, with shearing resistance increasing semilogarithmically with increasing strain rate above a certain threshold strain rate. With all forces acting on the cylinder, estimated penetration depths are predicted from simple equations of motion for a single particle. Comparisons to laboratory tests involving penetration of cylinders into soft reconstituted marine clay show reasonable agreement between model predictions and measurements.  相似文献   

10.
Undrained shear strength is a fundamental parameter for estimating the stability of soft soils. This study explores the relationship between undrained shear strength, void ratio, and shear wave velocity for saturated and normally consolidated clay specimens. The undrained shear strength void ratio-shear wave velocity relationship was correlated to empirically determined parameters of selected marine clay specimens. To verify the proposed relationship between undrained shear strength and shear wave velocity, in situ flat dilatometer tests were used for determining the undrained shear strength, and downhole tests were used to assess the shear wave velocity on a natural soil deposit at various depths. The undrained shear strength estimated from the in situ shear wave velocities was compared to the undrained shear strength obtained in the field. The results show that the inferred undrained shear strength yield similar values and follow the same trends as the in situ undrained shear strength data. This method using shear wave velocity can help to nondestructively estimate the undrained shear strength of soft soils in the field and be used in both on-shore and off-shore geotechnical engineering projects.  相似文献   

11.
Mechanisms and timescales responsible for pockmark formation and maintenance remain uncertain, especially in areas lacking extensive thermogenic fluid deposits (e.g., previously glaciated estuaries). This study characterizes seafloor activity in the Belfast Bay, Maine nearshore pockmark field using (1) three swath bathymetry datasets collected between 1999 and 2008, complemented by analyses of shallow box-core samples for radionuclide activity and undrained shear strength, and (2) historical bathymetric data (report and smooth sheets from 1872, 1947, 1948). In addition, because repeat swath bathymetry surveys are an emerging data source, we present a selected literature review of recent studies using such datasets for seafloor change analysis. This study is the first to apply the method to a pockmark field, and characterizes macro-scale (>5 m) evolution of tens of square kilometers of highly irregular seafloor. Presence/absence analysis yielded no change in pockmark frequency or distribution over a 9-year period (1999–2008). In that time pockmarks did not detectably enlarge, truncate, elongate, or combine. Historical data indicate that pockmark chains already existed in the 19th century. Despite the lack of macroscopic changes in the field, near-bed undrained shear-strength values of less than 7 kPa and scattered downcore 137Cs signatures indicate a highly disturbed setting. Integrating these findings with independent geophysical and geochemical observations made in the pockmark field, it can be concluded that (1) large-scale sediment resuspension and dispersion related to pockmark formation and failure do not occur frequently within this field, and (2) pockmarks can persevere in a dynamic estuarine setting that exhibits minimal modern fluid venting. Although pockmarks are conventionally thought to be long-lived features maintained by a combination of fluid venting and minimal sediment accumulation, this suggests that other mechanisms may be equally active in maintaining such irregular seafloor morphology. One such mechanism could be upwelling within pockmarks induced by near-bed currents.  相似文献   

12.
ABSTRACT

In this study, settling tests were conducted to investigate the sedimentation and self-weight consolidation behavior of seafloor sediments from Isahaya Bay, Ariake Sea, Japan. During the tests, the density variations with depth and time were measured by a gamma-ray transmission radioisotope densitometer. The test results show that the settling process of the seafloor sediments can be classified into the flocculation stage, settling stage, and consolidation stage. The settling rate of the seafloor sediments in the settling stage is dependent on the temperature and initial water content, while the settling rate in the consolidation stage is independent of the temperature and initial water content. The density profile changes from a constant density profile to a linear density profile when the sedimentation process transitions to the self-weight consolidation process. The relations between the void ratio (e) and effective vertical stress (p’) at very low pressures can be calculated from the measured density values, and this can be used for the analysis of the self-weight consolidation of seafloor sediments. For the seafloor sediments tested in this study, the undrained shear strength (su) values are almost the same when the density values are less than 1.14?g/cm3, and the su values increase linearly with an increase in density when the density values are in the range of 1.14–1.2?g/cm3.  相似文献   

13.
This study tests the hypothesis that the in situ void ratio of surficial marine sediments may be predicted from shear wave velocity-depth data with a reliability equal to that of other methods currently available. Shear wave velocity is fundamentally controlled by the number of grain-to-grain contacts per unit volume of material and by the effective stress across those contacts. In this study, three previously established empirical formulae are used to predict void ratio from velocity-depth data. Field data were acquired along a transect off the northern Californian coast across which water depth increased from 35 to 70 m and seafloor sediment type varied from sand to silty-sand, respectively. A towed seafloor sled device was used to collect shear wave refraction data, and a marked, systematic decrease in velocity was observed along the line, ranging from 35-70 m/s for the coarse, near-shore material to 25-40 m/s for the finer, offshore deposits. Void ratios predicted from these velocities were compared with data measured directly from box-core samples. Of the formulae used for prediction, two agree remarkably well with the control data. Both predicted and control values increase from 0.6-0.8 for the sandy material to 1.1-1.5 for the silty-sand. Thus, this study does not disprove the hypothesis set and demonstrates the potential of field shear wave velocity-depth data as a means of delineating spatial variation in void ratio for surficial marine sediments in a remote, nondestructive manner.  相似文献   

14.
Soft kaolinite deposits of marine origin are encountered as foundation soils in many parts of the world. The well-developed flocculated structure of kaolinite-bearing marine deposits is amenable to alterations from leaching of pore solution salts, loss of overburden, and secondary compression. Secondary compression causes densification of microstructure that may impact the viscous resistance, soil stiffness, and undrained shear strength of kaolinite-bearing marine deposits. This study examines the influence of secondary compression on viscous resistance and constrained stress–strain modulus of soft kaolinites prepared in synthetic seawater and sodium chloride solutions. The impact of secondary compression on undrained shear strength is interpreted from changes in microstructure, percent monovalent cation concentration, viscous resistance, and constrained stress–strain modulus. Kaolinite specimens experience reduction in void space during secondary compression. Breakdown of edge–face (E–F) and edge–edge (E–E) contacts of kaolinite particles during secondary compression and creation of interlocking zones is observed from scanning electron micrograph studies. Breakdown of E–F and E–E contacts is considered responsible for reduction in constrained stress–strain modulus during secondary compression. Concomitant, creation of interlocking zones at particle contacts increases the viscous resistance of microstructure that enhances the undrained shear strength of soft kaolinites.  相似文献   

15.
We investigated the impact of sediment reworking fauna and hydrodynamics on mobilization and transport of organic matter and fine particles in marine sediments. Experiments were conducted in an annular flume using lugworms (Arenicola marina) as model organisms. The impact of lugworms on sediment characteristics and particle transport was followed through time in sediments experimentally enriched with fine particles (< 63 μm) and organic matter. Parallel experiments were run at low and high water current velocity (11 and 25 cm s− 1) to evaluate the importance of sediment erosion at the sediment–water interface. There was no impact of fauna on sediment composition and particle transport at current velocity below the sediment erosion threshold. At current velocity above the erosion threshold, sediment reworking by lugworms resulted in dramatic particle transport (12 kg dry matter m− 2) to an adjacent particle trap within 56 days. The transported matter was enriched 6–8 times in fine particles and organic matter when compared to the initial sediment. This study suggests that sediment reworking fauna is an important controlling factor for the particle composition of marine sediments. A. marina mediated sediment reworking greatly increases the sediment volume exposed to hydrodynamic forcing at the sediment–water interface, and through sediment resuspension control the content of fine particles and organic matter in the entire reworked sediment layer (> 20 cm depth).  相似文献   

16.
  相似文献   

17.
This report describes extensive investigations of the near bottom layer of the Western Baltic (Mecklenburg Bight, Darss Sill and Arkona Basin) which were conducted over a 5 year period to determine the typical structure, vertical thickness, vertical turbulence structure, and spatial and temporal variability of this water mass with regard to the area's particular hydrographic conditions. Series of vertical profiles were obtained using the microstructure profiler MSS86, which is capable of measuring high resolution profiles of temperature, conductivity, current shear, light attenuation and pressure down to the seafloor. The near bottom current structure was simultaneously measured with conventional current metres at fixed depths. A typical vertical density structure of the near bottom layer was found. At all investigation sites the Bottom Boundary Layer was separated from the overlying water mass by a well pronounced thermohaline pycnocline. A homogeneous water layer was situated above the bottom with a mean thickness of 2.2 m and typical variation between 0.5 and 3.5 m. The thickness of both the homogeneous layer and of the near bottom layer vary considerably. It is suggested that horizontal advection is responsible for these fluctuations in thickness. The variation in thickness of the Homogeneous Layer is independent of the local mean current velocity, wind speed and energy dissipation rate. Over periods of about 2 days the thickness of the Homogeneous Layer is determined by the average wind speed. The Bottom Boundary Layer shows its own characteristic dynamic, which is largely decoupled from that of the remaining water body. A logarithmic layer was generally not resolved by the current measurements. From dissipation rate measurements, the wall layer was determined to be 0.9 m thick. There was no significant correlation between the dissipation rate and the local wind speed, or between the dissipation rate and local mean current u100. This means that any simple parameterisation relating u100 or friction velocity to the locally produced turbulence and consequently to the resuspension of sediment is probably not applicable to shallow sea areas with properties like the Western Baltic. The investigation of sediment concentration in the BBL illustrates the importance of local effects combined with advection. The sediment stratified layer covers only the bottom most 50 cm.  相似文献   

18.
The use of the piezocone penetration test (CPTU) in a geotechnical site investigation offers direct field measurement on stratigraphy and soil behavior. Compared with some traditional investigation methods, such as drilling, sampling and field inspecting method or laboratory test procedures, CPTU can greatly accelerate the field work and hereby reduce corresponding operation cost. The undrained shear strength is a key parameter in estimation of the stability of natural slopes and deformation of embankments in soft clays. This paper provides the measurements of in situ CPTU, field vane testing and laboratory undrained triaxial testing of Lianyungang marine clay in Jiangsu province of China. Based on the literature review of previous interpretation methods, this paper presents a comparison of field vane testing measurements to CPTU interpretation results. The undrained shear strength values from both the field vane tests and cone penetration resistances are lowest at the mid-depths of the marine clay layers, and the excess pore water pressures are highest at the mid-depths of the marine clay layers, indicating that the marine clay layer is underconsolidated.  相似文献   

19.
Analytical results of sound velocity and spectrum for seafloor sediment ore obtained by VWA (velocity-wave-amplitude) discrimination technique. Based on velocity-wave-amplitude, an understanding is gained of the physical condition and structural characteristics of seafloor sediment, which is combined with other geological information of the sedimentary layer to synthetically discriminate the properties of seafloor sediment. Experimental results show that, by using the relationship between sound velocity, wave form envelope, amplitude shape and size, and such parameters as sedimentary structure, microstructure, bedding, grain composition, mineral composition, and physical-mechanics, etc., the basic properties of the shallow surface seafloor sediment in the experimental sea area can be discriminated and the burial depth of traces of ancient marine transgression and regression events in the borehole cores of seafloor sediment can be divided, thus making an attempt of and contribution to the practice of acoustically remote-sensing and telemetering seafloor sediment.  相似文献   

20.
Analytical results of sound velocity and spectrum for seafloor sediment ore obtained by VWA (velocity-wave-amplitude) discrimination technique. Based on velocity-wave-amplitude, an understanding is gained of the physical condition and structural characteristics of seafloor sediment, which is combined with other geological information of the sedimentary layer to synthetically discriminate the properties of seafloor sediment. Experimental results show that, by using the relationship between sound velocity, wave form envelope, amplitude shape and size, and such parameters as sedimentary structure, microstructure, bedding, grain composition, mineral composition, and physical-mechanics, etc., the basic properties of the shallow surface seafloor sediment in the experimental sea area can be discriminated and the burial depth of traces of ancient marine transgression and regression events in the borehole cores of seafloor sediment can be divided, thus making an attempt of and contribution to the practice of acoustically remote-sensing and telemetering seafloor sediment.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号