共查询到15条相似文献，搜索用时 359 毫秒
1.
由于沿海区域的限制以及愈加严重的环境污染,渔业养殖正从近海走向深远海。深远海海域的海况更加恶劣,给养殖装备的设计与性能评估带来新的挑战。为解决该问题,对极端波浪与养殖装备网衣结构的相互作用开展研究。基于waves2Foam建立数值波浪水池,极端波浪模拟采用基于NewWave理论的聚焦波模型,网衣结构模拟采用多孔介质模型,并通过与Morison模型计算的网衣受力等效分析,获得多孔介质模拟网衣结构阻力系数的直接估计方法。然后将多孔介质模型嵌入waves2Foam中,开展聚焦波与网衣结构相互作用的数值模拟,同时开展水槽试验,验证数值模拟的准确性。基于数值模拟结果,系统地分析了不同网衣密实度及不同波浪参数下网衣结构的升阻力特性以及网衣结构对波浪场的扰动规律。研究表明：聚焦波波峰幅值和网衣密实度对网衣结构的升阻力影响较大,且升力峰值出现在阻力为0的时刻;网衣结构对聚焦波的时空演化特性有影响,改变了聚焦波波形。 相似文献
2.
当今世界,全球资源严重匮乏,环境日益恶化,波浪能作为一种清洁、可再生海洋能源,有利于贯彻我国可持续发展战略。文中针对南海某海域,根据国家海洋局提供的波浪周期和波高数据,通过计算流体力学(CFD)数值模拟,研究不同时期波浪周期和波高的变化对轴流式水轮机效率的影响。计算结果表明,因波浪参数变化,浮筒式波浪能发电装置水头变化范围为11~17 m,优选设计水头为13 m。通过改变水轮机叶片安装角度,优化水轮机效率,并对水轮机转轮及出水流道流动特性进行研究。最终得出:在优选设计水头为13 m时,水轮机在叶片相对安放角为-4°,最高效率达85.67%,水轮机转轮及出水流道流态平直,水轮机工作性能稳定,满足浮筒式波能发电装置工作要求。文中研究工作,为优化浮筒式波能发电平台及提高平台投资回报率奠定理论基础。 相似文献
3.
评估结构耐撞性能最可靠的方法是实尺度碰撞试验,然而对于大尺度结构物的碰撞试验,因其耗资巨大而不易开展,适当开展比例模型试验可以为简化解析算法及数值仿真计算提供验证依据,也可在一定程度上评估结构的耐撞性能。但是在进行碰撞模型试验时,材料应变率的敏感性会使得缩尺模型的动态响应与实尺度结构结果出现偏差,模型试验得到的数据与实际结构的动响应不完全遵循相似关系,这就限制了相似理论在大型结构物冲击问题上的应用。本文给出了一种通过改变冲击质量来修正应变率效应的方法,不同于传统量纲分析法中选取时间、质量和长度为基本量纲,而是以冲击质量、初始冲击速度和动态应力代替,得到计及应变率效应的质量相似关系。以此为基础,将该修正方法应用于船舶-自升式海洋平台的碰撞分析中。研究结果表明,该修正方法可以有效降低由于应变率效应而造成的缩尺误差,修正后的缩尺模型在碰撞冲击载荷下的位移、碰撞力和撞击时间等动态响应参数与实尺度模型结果的一致性更好。本文研究成果可以为大型结构物冲击模型试验设计提供技术支撑。 相似文献
4.
对安装在海上风电钢管桩基础上的升降式网箱结构的波浪场特性进行研究,掌握升降式网箱结构内部及结构后方水体的运动特征及速度场变化情况。基于OpenFOAM软件包开发了波、流与孔隙介质结构相互作用的数值计算模型,将网箱结构按等效阻力简化为多孔介质结构,开展升降式网箱结构的波浪场特性研究。研究结果表明：网箱结构对流体具有一定的阻流作用,网箱结构内部速度场得到一定程度的减小,网箱结构背浪侧也有一定的速度衰减区域;对比网箱结构顶部不同潜深条件下的网箱结构内部流场特征,网箱结构顶部潜深在1/4D~1/2D（D为水深）范围内网箱结构内部流场速度最小、流场最为稳定、速度分布均匀,网箱结构向浪侧前方和背浪侧后方流场波动较小。所得结论表明在钢管桩基础上安装升降式网箱结构时需要关注的网箱结构对流场特性的影响,充分考虑网箱结构阻力对流速的作用,掌握极端工况下升降式网箱结构保持优良养殖环境需要下潜的高度范围,以保障升降式网箱的安全。 相似文献
5.
通过CFD计算软件Fluent对叶片进行水动力仿真分析,由叶片压力曲线分析影响翼型效率的主要因素,对比分析选出S翼型,并由此翼型设计了对称S翼型,进行UG建模并通过接口导入Fluent进行叶轮仿真分析,由N-S控制方程及压力云图确定叶片数量。建立Bladed模型,仿真得到不同叶片的叶轮在不同的流速下转矩的变化情况及不同桨距角尖速比与获能效率的关系曲线。最后在实验室有机玻璃导管测试系统得到对称S型叶轮在不同流速下的获能效率。实验结果表明,对称S翼型具有捕获双向来流的能力,在实验流速为2.2 m/s时最大获能效率可达40%。为海流自供电浮标进行了正确选型,提高了效率,所得数据也为之后海试试验提供了理论参考。 相似文献
6.
Head-wave parametric rolling of a surface combatant 总被引：1，自引：0，他引：1
Hamid Sadat-Hosseini Angelo Olivieri Hirotada Hashimoto Gabriele Bulian 《Ocean Engineering》2010,37(10):859-878
Complementary CFD, towing tank EFD, and nonlinear dynamics approach study of parametric roll for the ONR Tumblehome surface combatant both with and without bilge keels is presented. The investigations without bilge keels include a wide range of conditions. CFD closely agrees with EFD for resistance, sinkage, and trim except for Fr>0.5 which may be due to free surface and/or turbulence modeling. CFD shows fairly close agreement with EFD for forward-speed roll decay in calm water, although damping is over/under predicted for largest/smaller GM. Most importantly CFD shows remarkably close agreement with EFD for forward-speed parametric roll in head waves for GM=0.038 and 0.033 m, although CFD predicts larger instability zones at high and low Fr, respectively. The CFD and EFD results are analyzed with consideration ship motion theory and compared with Mathieu equation and nonlinear dynamics approaches. Nonlinear dynamics approaches are in qualitative agreement with CFD and EFD. The CFD and nonlinear dynamics approach results were blind in that the actual EFD radius of gyration kxx was not known a priori. 相似文献
7.
Computations of self-propulsion free to sink and trim and of motions in head waves of the KRISO Container Ship (KCS) model 总被引：2，自引：0，他引：2
Two computations of the KCS model with motions are presented. Self-propulsion in model scale free to sink and trim are studied with the rotating discretized propeller from the Hamburg Model Basin (HSVA) at Fr = 0.26. This case is particularly complex to simulate due to the close proximity of the propeller to the rudder. The second case involves pitch and heave in regular head waves. Computations were performed with CFDShip-Iowa version 4.5, a RANS/DES CFD code designed for ship hydrodynamics. The self-propulsion computations were carried out following the procedure described in Carrica et al. [1], in which a speed controller is used to find the propeller rotational speed that results in the specified ship velocity. The rate of revolutions n, sinkage, trim, thrust and torque coefficients KT, KQ and resistance coefficient CT(SP) are thus obtained. Comparisons between CFD and EFD show that the rate of revolutions n, thrust and torque coefficients KT and KQ have higher prediction accuracies than sinkage and trim. For the simulation of pitch and heave in head waves, the geometry includes KCS hull and rudder under three conditions with two Froude numbers and three wave length and amplitude combinations. 0th and 1st harmonic amplitudes and 1st harmonic phase are computed for total resistance coefficient CT, heave motion z and pitch angle θ. Comparisons between CFD and EFD show that pitch and heave are much better predicted than the resistance. In both cases comparisons with simulations by other authors presented at the G2010 CFD Workshop [2] using different CFD methodologies are included. 相似文献
8.
CFD, system-based and EFD study of ship dynamic instability events: Surf-riding, periodic motion, and broaching 总被引：1，自引：0，他引：1
Hamid Sadat-Hosseini Frederick Stern Naoya Umeda Shinya Yamamura 《Ocean Engineering》2011,38(1):88-110
CFD and system-based simulation are used to predict broaching, surf-riding, and periodic motion for the ONR Tumblehome model, including captive and free model test validation studies. CFD shows close agreement with EFD for calm water resistance, static heel (except for sway force and yaw moment), and static drift (except for roll moment). CFD predictions of static heel in following waves also compare well with EFD except for surge force, sway force, and pitch angle. Froude-Krylov calculations of wave-induced surge force in following waves provides good agreement for high Froude number, but significantly overestimates for Froude number less than 0.2. On the other hand, CFD successfully reproduces the reduction of the wave-induced surge force near Froude number 0.2, probably because CFD can capture the 3D wave pattern. CFD free model simulations are performed for several speeds and headings and validated for the first time for surf-riding, broaching, and periodic motions. System-based simulations are carried out based on inputs from EFD, CFD, and Froude-Krylov for a dense grid of speeds and headings to predict the instability map, which were found to produce fairly similar results. 相似文献
9.
To improve the energy efficiency of ships and to predict ship motion response under actual sea conditions, the far-field theory, strip theory, and Fujii and Takahashi’s modified semi-empirical method are based and studied to calculate the wave-induced added resistance. Firstly, a new modified formula based on the Maruo method is presented to calculate the radiation added resistance for the ship with a complex surface. Meanwhile, some calculation details such as the Green function, the shape of the sections (shape below the still water level or shape below the wave level) in the strip theory, and so on are discussed. Finally, the CFD method is used to simulate the motions of the hull and the added resistance, and the results of the CFD method and those of other numerical methods are analyzed and compared with the experiment results. The modified method in the paper can predict the added resistance in waves for the complex-hull-surface ships well and quickly.
相似文献10.
F. Prez Arribas 《Ocean Engineering》2007,34(7):946-955
Added resistance in waves is an important part of ship dynamic due to its economical effect on ship exploitation. Can the ship sustain speed in a rough sea state? If not, this will produce delays and economical losses if added resistance is not taken into account in the propulsion design. There are not many simple methods to obtain the added resistance in waves of a ship, and the validity of the results is not always good enough for different ships. In this paper, some theories that can be used to predict the added resistance of a ship are studied and validated against seakeeping tests of some monohull models. Tests and results focus in head seas, which are the most severe for the added resistance. Experimental results are compared with numerical calculations and conclusions about the range of application of the presented theories are obtained. 相似文献
11.
Improvements of estimation accuracy on propeller torque fluctuations in waves will contribute assessments on safe operation of a ship main engine as in adverse sea condition. The propeller torque and thrust in waves can be estimated by propeller effective inflow velocity in waves, using the propeller open-water characteristics. Fluctuation components in the mathematical model of the propeller effective inflow velocity in waves can be composed of two components, respectively caused by ship surge motion and wave orbital motion at propeller position. In this study, an experimental method by the model test to directly identify the characteristics of the component by the wave orbital motion is newly proposed. Furthermore, the free-running model test in regular waves, using a simulator of the marine diesel engine which manages the shaft speed of the motor on a ship model as behaving the actual diesel engine, is carried out to obtain realistic torque fluctuations for comparisons of the estimated results applying the proposed identification method. Through comparisons of estimated fluctuations with the measured results, the proposed approach for the component of the inflow velocity due to wave orbital motion is successfully validated. 相似文献
12.
为提高母型船阻力性能,以船体阻力性能为优化对象,基于改造母型船法,研究船舶球鼻艏以及船尾线型的改变对船舶阻力性能的影响.采用高度集成化的Tribon系统、可视化绘图软件Auto CAD及CFD(Computational Fluid Dynamics)通用前处理软件ICEM联合建模的方法来建立船体模型.通过模拟计算结果与实验值的对比分析,验证CFD技术在船舶阻力性能预报中的合理性和有效性.通过对比3种不同球鼻艏时的船体阻力得知:从阻力性能方面考虑,对于低速丰满型船舶选用普通型球鼻艏以及中高速船舶采用上翘型球鼻艏均可以获取较好地减阻效果.同时比较不同航速下尾部线型对船体总阻力的影响表明,选优后的方形尾在相同的航速下阻力低、消耗的功率小、形状效应小、黏压阻力和摩擦阻力也相对较小. 相似文献
13.
Flapping wings located beneath or to the side of the hull of the ship are investigated as unsteady thrusters, augmenting ship propulsion in waves. The main arrangement consists of horizontal wing(s) in vertical oscillatory motion which is induced by ship heave and pitch, while rotation about the wing pivot axis is actively controlled. In this work we investigate the energy extraction by the system operating in irregular wave conditions and its performance concerning direct conversion to propulsive thrust. More specifically, we consider operation of the flapping foil in waves characterised by a spectrum, corresponding to specific sea state, taking into account the coupling between the hull and the flapping foil dynamics. The effect of the wavy free surface is accounted for through the satisfaction of the corresponding boundary conditions and the consideration of the wave velocity on the formation of the incident flow. Numerical results concerning thrust and power coefficients are presented, indicating that significant thrust can be produced under general operating conditions. The present work can be exploited for the design and optimum control of such systems extracting energy from sea waves for augmenting marine propulsion in rough seas, with simultaneous reduction of ship responses offering also dynamic stabilisation. 相似文献
14.
三体船的水动力性能是目前水动力学研究的热门。对于中高速三体船来说,其静水阻力的很大一部分由兴波阻力构成,而对于兴波最大的影响因素就是片体位置的布局。以一艘圆舭型三体船为研究对象,运用黏流计算流体力学(CFD)方法模拟分析4种不同片体位置对三体船静水阻力和兴波干扰的影响。数值计算采用自主研发的黏流CFD求解器naoe-FOAM-SJTU。数值预报得到三体船静水阻力结果与模型试验结果吻合较好,验证了当前CFD方法预报三体船阻力的可靠性。通过不同片体位置三体船阻力计算发现,方案4的船型方案阻力最优,且通过细节的主片体间兴波干扰流场的结果给出了不同片体布置方案对三体船阻力和兴波的影响。 相似文献
15.
在Fudide-Krylov假设条件下,依据船舶分离建模理论在固定和运动坐标系中计算海面船只六自由度运动数学模型。主要包括:对风、浪、流的单独建模并进行矢量叠加,并在风浪流联合作用下对船舶六自由度运动构建简化的数学建模,完成实时仿真。基于Simulink和V-Realm Builder虚拟现实技术创建船舶运动模型、海洋表面环境及船只的几何模型,对船舶六自由度运动进行视景仿真,给出了有风无浪、有浪无风和风浪兼有三种情况下船只旋回路径和船舶运动轨迹。在VR视景浏览器中创建动态海面上船舶六自由度运动模型,不仅易于实现且结果逼真。得到的结果为进一步研究动态船只目标声散射特性的精确预报提供基础。 相似文献