共查询到20条相似文献，搜索用时 31 毫秒
1.
In this study, loss with time of dredged sea sand in a tidal embankment subject to sea level variation was examined through the centrifugal model test. The experimental results demonstrate that a differential subsidence occurs on the surface of the dredged-sea-sand fill and that the largest subsidence was observed just above the damaged portion of the geosynthetic mat. In addition, image analysis provided the largest displacement vector at the damaged portion of the geosynthetic mat, the shear-strain localization from the damaged portion of the geosynthetic mat through the center of the slope surface, and the crest of the dredge-sea sand fill. These displacement vectors and shear strains occurred early in the experiment and increased over time. Therefore, the loss of dredged sea sand can occur rapidly with damage to the geosynthetic mat and can possibly induce differential subsidence and cracks at the surface of the dredged-sea sand fill. 相似文献
2.
3.
数据同化利用观测信息对模型状态场调整的同时也可以对数值模型中的不确定参数进行估计,从而改进数值模型,提高数值模拟的精度。本文基于集合调整卡尔曼滤波方法,采用广义坐标系统的美国普林斯顿大学海洋模式的外模式开展了渤海和部分黄海海域M2分潮模拟中的水深估计研究。理想数据同化试验结果表明,集合调整卡尔曼滤波方法能很好地降低模式模拟的水位误差并反演出“真实”的水深参数。而在NAO.99Jb和验潮站数据的实际数据同化试验中,与验潮站数据相比较,水深参数估计后,模式模拟的M2分潮振幅与迟角误差分别降低了40.27%和49.19%。 相似文献
4.
利用二维非线性潮波方程组,讨论了渤黄海主要分潮(全日潮、半日潮及浅水分潮) 数值模拟中的有关问题。数值模拟中同时考虑了4个主要分潮(M2,S2,K1,O1)和两个浅水分潮(M4,MS4)。分析表明,在渤黄海潮波系统数值模拟中,稳定后选取14 d的数值模拟结果进行调和分析能够取得最佳(最合理)的调和分析结果。计算出调和常数的模拟值与实测值之差的绝对平均值:M2分潮的振幅差为4cm,迟角差为3.3°,S2分潮的振幅差为2cm,迟角差为4.2°,K1 分潮的振幅差为1cm,迟角差为3.7°,O1分潮的振幅差为2 cm,迟角差为5.5°。实验结果较好地体现了渤黄海潮波系统的特征。 相似文献
5.
作为半封闭狭长海湾,铁山湾受风暴潮灾害的影响较为严重。根据多年观测资料和数值模型对铁山湾内的风暴潮水位特征进行了研究。观测资料表明海湾内风暴潮峰值水位受天文潮相位影响较为显著,然后基于ADCIRC风暴潮模型和1409号“威马逊”台风参数,定量评估了天文潮对风暴潮水位的影响。模拟结果表明当考虑天文潮作用时,会显著提高模拟结果精度,然后通过数值实验研究了风暴潮与不同相位天文潮相互作用时的水位变化特征。数值实验结果表明天文潮-风暴潮相互作用引起的非线性水位在涨潮阶段不明显,在高潮位时非线性水位达到负值最大;在落潮时达到正值最大。风暴潮增水峰值由于受到这种非线性效应的影响,在高潮位时数值最小。海湾内非线性作用要远大于外部,非线性效应越强,总水位峰值相对于天文潮高潮位的延迟时间也就越长。 相似文献
6.
7.
TAI Chang-Kou 《海洋学报(英文版)》2011,30(4):102-106
An attempt is made to infer the global mean sea level(GMSL) from a global tide gauge network and frame the problem in terms of the limitations of the network. The network,owing to its limited number of gauges and poor geographical distribution complicated further by unknown vertical land movements,is ill suited for measuring the GMSL. Yet it remains the only available source for deciphering the sea level rise over the last 100 a. The poor sampling characteristics of the tide gauge network have necessitated the usage of statistical inference. A linear optimal estimator based on the Gauss-Markov theorem seems well suited for the job. This still leaves a great deal of freedom in choosing the estimator. GMSL is poorly correlated with tide gauge measurements because the small uniform rise and fall of sea level are masked by the far larger regional signals. On the other hand,a regional mean sea level(RMSL) is much better correlated with the corresponding regional tide gauge measurements. Since the GMSL is simply the sum of RMSLs,the problem is transformed to one of estimating the RMSLs from regional tide gauge measurements. Specifically for the annual heating and cooling cycle,we separate the global ocean into 10-latitude bands and compute for each 10-latitude band the estimator that predicts its RMSL from tide gauges within. In the future,the statistical correlations are to be computed using satellite altimetry. However,as a first attempt,we have used numerical model outputs instead to isolate the problem so as not to get distracted by altimetry or tide gauge errors. That is,model outputs for sea level at tide gauge locations of the GLOSS network are taken as tide gauge measurements,and the RMSLs are computed from the model outputs. The results show an estimation error of approximately 2 mm versus an error of 2.7 cm if we simply average the tide gauge measurements to estimate the GMSL,caused by the much larger regional seasonal cycle and mesoscale variation plaguing the individual tide gauges. The numerical model,Los Alamos POP model Run 11 lasting 3 1/4 a,is one of the best eddy-resolving models and does a good job simulating the annual heating and cooling cycle,but it has no global or regional trend. Thus it has basically succeeded in estimating the seasonal cycle of the GMSL. This is still going to be the case even if we use the altimetry data because the RMSLs are dominated by the seasonal cycle in relatively short periods. For estimating the GMSL trend,longer records and low-pass filtering to isolate the statistical relations that are of interest. Here we have managed to avoid the much larger regional seasonal cycle plaguing individual tide gauges to get a fairly accurate estimate of the much smaller seasonal cycle in the GMSL so as to enhance the prospect of an accurate estimate of GMSL trend in short periods. One should reasonably expect to be able to do the same for longer periods during which tide gauges are plagued by much larger regional interannual(e. g.,ENSO events) and decadal sea level variations. In the future,with the availability of the satellite altimeter data,we could use the same approach adopted here to estimate the seasonal variations of GMSL and RMSL accurately and remove these seasonal variations accordingly so as to get a more accurate statistical inference between the tide gauge data and the RMSLs(therefore the GMSL) at periods longer than 1 a,i. e.,the long-term trend. 相似文献
8.
采用三维浅海湖波定解方程组,建立番禺附近海域的三维潮流数值模型来计算潮流和潮位变化情况,开边界采用调和常数计算的水位来驱动,潮流和潮位验证结果较好,模拟结果较真实的反应了番禺附近海域的潮流和潮位情况.在潮流模拟验证正确的前提下,建立溢油预测数值模型,采用欧拉-拉格朗日追踪方法,对油膜中心轨迹进行预测,并预测出油膜的平均... 相似文献
9.
Christian Ferrarin Georg Umgiesser Marco Bajo Debora Bellafiore Francesca De Pascalis Michol Ghezzo Giorgio Mattassi Isabella Scroccaro 《Estuarine, Coastal and Shelf Science》2010
The hydraulic regime-based zonation scheme of the Lagoons of Marano and Grado (Italy) has been derived by means of numerical models. A finite element modelling system has been used to describe the water circulation taking in account different forces such as tide, wind and rivers. The model has been validated by comparing the simulation results against measured water levels, salinity and water temperature data collected in several stations inside the lagoons. The analysis of water circulation, salinity and spatial distribution of passive tracers released at the inlets, led to a physically-based division of the lagoons system into six subbasins. The derived classification scheme is of crucial value for understanding the renewal capacity and pollutants distribution patterns in the lagoon. 相似文献
10.
11.
12.
Uplift response of symmetrical anchor plates with and without grid fixed reinforced （GFR） reinforcement was evaluated in model tests and numerical simulations by Plaxis. Many variations of reinforcement layers were used to reinforce the sandy soil over symmetrical anchor plates. In the current research, different factors such as relative density of sand, embedment ratios, and various GFR parameters including size, number of layers, and the proximity of the layer to the symmetrical anchor plate were investigated in a scale model. The failure mechanism and the associated rupture surface were observed and evaluated. GFR, a tied up system made of fiber reinforcement polymer （FRP） strips and end balls, was connected to the geosynthetic material and anchored into the soil. Test results showed that using GFR reinforcement significantly improved the uplift capacity of anchor plates. It was found that the inclusion of one layer of GFR, which rested directly on the top of the anchor plate, was more effective in enhancing the anchor capacity itself than other methods. It was found that by including GFR the uplift response was improved by 29%. Multi layers of GFR proved more effective in enhancing the uplift capacity than a single GFR reinforcement. This is due to the additional anchorage provided by the GFR at each level of reinforcement. In general, the results show that the uplift capacity of symmetrical anchor plates in loose and dense sand can be significantly increased by the inclusion of GFR. It was also observed that the inclusion of GFR reduced the requirement for a large L/D ratio to achieve the required uplift capacity. The laboratory and numerical analysis results are found to be in agreement in terms of breakout factor and failure mechanism pattern. 相似文献
13.
风暴作用下渤海中污染物(COD)输运的研究 总被引：4，自引：0，他引：4
本文利用三维POM模式,分别就潮汐作用下和风暴作用下污染物输运进行了数值模拟;比较了两种驱动下渤海内污染物输运的差异。通过比较发现:风暴潮(尤其是寒潮)平均每年使渤海污染物总量的减少量是潮汐作用的3~4倍;每次风暴潮过程对渤海内污染物重新分布的作用与潮汐30天的作用是同量级的。所以,在研究渤海的污染物输运时,必须考虑风暴潮的作用,否则,会产生很大的误差。 相似文献
14.
A three-dimensional multi-level turbulence model is developed to simulate tide induced circulation in coastal waters. Based on the bathymetry data, the coastal waters are divided into a number of layers. In every layer, the velocities are integrated along the layer depth. The eddy viscosity and diffusivity are computed from the Prandtl mixing length turbulence model. This multi-level model solves for the water surface elevations and currents in different water depths. Comparison of numerical results with the measured data shows good conformity. 相似文献
15.
16.
17.
基于采用无结构网格和有限体积方法的FVCOM陆架模式,考虑8个主要的天文分潮,建立胶州湾三维高分辨率数值模型来重现和研究其潮汐潮流变化状况。与实测资料对比验证表明,模拟结果与实测值吻合较好。在此基础上,根据模拟结果计算得到了较以往更为精细的同潮图和潮汐、潮流、余流分布特征。研究结果揭示,最大可能潮流和最大余流都发生在团岛附近,流速分别可达2.14和0.43 m/s;除了湾口附近前人报道过的4个余流系统外,还在中部首次揭示了2个相对较弱的余流系统;潮流能通量在内外湾口呈"左进右出"的结构;胶州湾的平均纳潮量为8.31亿m3;染色试验表明,胶州湾30 d的水交换率为36.8%。 相似文献
18.
Transport of bed sediment inside and beneath the scour protection may cause deformation and sinking of the scour protection for pile foundations. This may reduce the stability of the mono pile and change the natural frequency of the dynamic response of an offshore wind turbine installed on it in an unfavourable manner. Using physical models and 3D computational fluid dynamic (CFD) numerical simulations, the velocity and bed shear stresses are investigated in complex scour protections around mono piles in steady current. In the physical model the scour protections consisted of an upper cover layer with uniformly distributed coarse stones and a lower filter layer with finer stones. For the numerical simulations, the Flow-3D software was used. The scour protection layers were simulated with different numerical approaches, namely regularly arranged spheres, porous media, or their combinations (hybrid models). Numerical simulations with one or four layers of cover stones without filter layer were first computed. Three additional simulations were then made for a scour protection with a cover layer and a single filter layer. Finally, a simulation of a full scale foundation and scour protection was made with porous media approach.Based on the physical and numerical results, a method to determine the critical stones size to prevent motion of the base sediment is established and compared to a full scale case with sinking of scour protection (Horns Rev I Offshore Wind Farm, Denmark). It is also found that the CFD simulations are capable of calculating the flow velocities when the scour protection is represented by regular arranged spheres, while the turbulence in general is underestimated. The velocity can also be calculated using porous media flow approach, but the accuracy is not as good as for spheres. The deviation is more severe for more complex scour protections. In general, computational models provide valuable information for the prediction and design of scour protections for offshore wind farms. 相似文献
19.
基于潮汐表数据同化的天文潮数值预报模型及其模拟预报效果 总被引：1，自引：0，他引：1
潮汐表是利用长期潮汐观测结果经调和分析实现的主要港湾潮汐预报结果,具有较高的预报精度,而通常的天文潮数值预报目前还难以达到潮汐表的预报精度.本研究在建立常规天文潮数值预报模型的基础上,建立了基于潮汐表数据同化的天文潮数值预报模型,并分别采用这2种模型预报福建沿岸海域的天文潮.其结果表明同化模型的预报结果无论是在潮时还是在潮高均明显优于常规模型;同化模型能显著地改善所研究的沿岸海域90个水位点中至少45个水位点的潮汐预报结果,而其他水位点的预报结果也有不同程度地改善. 相似文献
20.