共查询到20条相似文献，搜索用时 578 毫秒
1.
The possibility of naval mines buried in the seafloor poses difficulties for navies concerned with port and seaway operations. To devise countermeasures, predictions of degrees of impact burial over wide areas of seabed must be made. Under ideal conditions, this is done with a knowledge of local seabed shear strengths, but in practice, such data are rarely available.
We describe an alternative prediction method. Probabilistic predictions of mine impact burial are made across areas of variable seafloor by combining data on sedimentary character directly with experimental impact burial results. The most useful seafloor characteristics are mud content and consolidation. The predictions are relatively accurate (SD 1-22%), and are computable in detail over wide geographic areas. They are of a form immediately useful for naval operations (including calculations of risk) and are easily displayed in geographic information systems (GIS). An example is shown for the northern Gulf of Mexico. 相似文献
We describe an alternative prediction method. Probabilistic predictions of mine impact burial are made across areas of variable seafloor by combining data on sedimentary character directly with experimental impact burial results. The most useful seafloor characteristics are mud content and consolidation. The predictions are relatively accurate (SD 1-22%), and are computable in detail over wide geographic areas. They are of a form immediately useful for naval operations (including calculations of risk) and are easily displayed in geographic information systems (GIS). An example is shown for the northern Gulf of Mexico. 相似文献
2.
This paper applies, for the first time in offshore deepwater, a method based on geographic information systems for seafloor susceptibility assessment as a first approach to marine geohazard mapping in fluid leakage areas (slope instabilities, gas escapes, seabed collapses, pockmarks, etc.). The assessment was carried out in a known seabed fluid-flow province located on the Iberian margin of the Gulf of C??diz, Spain. The method (based on statistical bivariate analysis) creates a susceptibility map that defines the likelihood of occurrence of seafloor features related to fluid flow: crater-like depressions and submarine landslides. It is based on the statistical index (Wi) method (Van Westen in Statistical landslide hazard analysis. ILWIS 2.1 for Windows application guide. ITC Publication, Enschede, pp 73?C84, 1997), in which Wi is a function of the cartographic density of seafloor features on ??factor maps??. The factors selected monitor the seafloor??s capability to store and transfer hydrocarbon gases and gravitational instability triggers: geology-lithology, gas hydrate stability zone thickness (temperature, pressure?Cwater depth and geothermal gradient), occurrence of diapirs, proximity to faults or lineaments, and slope angle of the seafloor. Results show that the occurrence of seafloor features related to fluid flow is highest where the factors ??gas source and storage?? and ??pathways of fluid escape?? converge. This means that they are particularly abundant over diapirs in contourite deposits, in the vicinity of faults, and inside theoretical gas hydrate stability fields thinned by warm undercurrents. Furthermore, the submarine landslides located on the Palaeozoic-Toarcian basement are not related to fluid leakage. This methodology provides helpful information for hazard mitigation in regional selection of potential drill sites, deep-water construction sites or pipeline routes. It is an easily applied and useful tool for taking the first step in risk assessment on a regional scale for vast areas where fluid leakage may be present, the geological model is known, and the geologically hazardous features have already been mapped. 相似文献
3.
针对海底地形复杂程度分类问题,在考虑传统水深均值的基础上引入坡度和起伏度两个地形因子作为表征海底地形复杂程度的分类指标并进行量化,对水深数据空间分辨率进行统一,建立包含18种典型海底特征的海底地形复杂度分类库,利用BP神经网络对建立的分类库进行训练学习。为验证该方法的有效性和适用性,选取地形复杂度不同的4块实验区分别采用统计学方法和BP神经网络算法进行海底地形复杂度进行分类,对比发现该方法可以实现海区海底平坦、一般、复杂三种地形的自动识别与分类,并保留实验区海底地形复杂度细节信息。 相似文献
4.
The sediment–water interface is usually marked by an increase in acoustic impedance and is therefore displayed in a seismic
section as a positive polarity reflection. Here, we use the term “seabed phase reversal” to describe areas of seafloor which
are instead expressed as a negative polarity reflection in seismic data. We describe in detail a number of examples of seafloor
phase reversals and use a simple one-dimensional geophysical model to test the hypothesis that they are the result of the
presence of gas within the seafloor sediment. Our examples are all related to seismically imaged mud volcanoes located within
the South Caspian Sea. Sections of phase-reversed seafloor at the summit area of these volcanoes have been mapped to reveal
the existence of seafloor mud pools (salses) and recently erupted mud flows which show a strong similarity to smaller-scale
features at onshore volcanoes in Azerbaijan. Synthetic geophysical modelling indicates that under the physical conditions
likely to occur when the seabed sediment is gas-bearing, the seafloor will be expressed as a strong negative polarity reflection.
Unlike other indicators of seafloor gas, such as pockmarks, which merely record the transient expulsion of fluids from sedimentary
basins, seafloor phase reversals indicate the presence of gas in marine sediment at the time of survey acquisition. They therefore
are of significance to engineering and site survey operations as well as the identification of biological communities and
gas flux calculations. 相似文献
5.
Guyonic S. Mory M. Wever T.F. Ardhuin F. Garlan T. 《Oceanic Engineering, IEEE Journal of》2007,32(1):119-132
A mine burial field experiment was carried out on two sandy seafloors between January and April 2004 in the Bay of Brest, France. Burial recording mines (BRMs) were used to measure burial and mine orientation at 15-min intervals. Sonar and bottom photographs were also used to characterize sediment morphology and mine burial. These observations are compared with the predictions of mine burial using the following three models: a momentary liquefaction model, a current-induced scour model, and a wave-induced scour model. Analysis combines mine burial data, sediment data, seabed observations, and hydrodynamic measurements. At the first site, ldquoRascas,rdquo the seabed dynamics are dominated by tides and river runoff. Almost no mine burial was measured during the experiment which is in agreement with predictions of mine burial models (current-induced scour and liquefaction). Dynamics at the second site, ldquoBertheaume,rdquo are driven by tides and ocean waves. A long storm (one week) and several swell events were experienced and significant mine burial was observed in conjunction with high significant waveheights. Mine burial models suggest that burial at ldquoBertheaumerdquo was dominated by wave-induced scour rather than current-induced scour or momentary liquefaction. 相似文献
6.
The effect of Cenozoic mass-transport deposits (MTDs) on the morphology of the Late Neogene to Quaternary seafloor is investigated using a 3D seismic volume from offshore Brazil. The studied MTD shows large remnant blocks deforming the seafloor several Ma after a principal instability event marking the base of the investigated strata. Remnant blocks formed during this latter instability event were quickly buried, with differential compaction between individual blocks and adjacent debrites triggering: a) seafloor instability on the flanks of uncompacted (remnant) blocks, b) the incision of submarine channels between seafloor highs formed by buried remnant blocks, c) local uplifted areas on the seafloor that may form potential triggers for future slope instabilities. The interpreted data show that palaeo-seafloor scarps reached more than 120 m in height, with flanking strata to remnant blocks reaching angles of 15°. Angles of this magnitude caused local collapse of seafloor strata and, in some intervals, the confinement of younger MTDs sourced from the upper slope. The statistical data presented here indicate that differential compaction over heterogeneous MTDs continued well after early burial, still deforming the seafloor c. 15 Ma after the main instability event. In addition, significant structural traps are formed by forced folds on remnant blocks that not experienced substantial compaction. Therefore, we conclude that MTDs on passive margins can control seafloor topography after early burial, at the same time contributing to the formation of significant structural traps in post-MTD successions. 相似文献
7.
Quantitative estimation of seafloor features from photographs and their application to nodule mining
Rahul Sharma 《Marine Georesources & Geotechnology》2013,31(4):311-331
Methods developed for quantitative estimation of seafloor features from seabed photographs and their application for estimation of nodule sizes, coverage, abundance, burial, sediment thickness, extent of rock exposure, density of benthic organisms, and their lebensspuren have been presented. Digitization of the photographs shows variable nodule size (< 1 to 10 cm), coverage (< 1 to 75%) and abundance (< 1 to 20 kg/m2). Nodule population is inversely proportional to the coverage of the sediment (10–100%) and its thickness (0 to > 10 cm), which causes differential burial (0–100%) of nodules. Correlation between nodule parameters (diameter and coverage) in the photographs and grab recovery is used to evolve empirical relationships for estimating nodule abundance in different seabed settings. The rock outcrops (basalts) with a coverage of 6–100% are the sources of nuclei for the nodules, the distribution of which is controlled by the local topography. Higher concentrations of nodules are observed along the slopes, followed by the crests of seamounts, and are lowest in the valleys and plains. A population density of 6–7 benthic organisms per 100 m2 belonging to 7 different phyla is observed, with a high frequency of lebensspuren (4–12 traces/m2) in association with nodules. Estimation of these parameters can be used as important inputs in the design of the nodule collector, as it will have to encounter a variety of seafloor conditions, such as patchy nodule distribution, rock outcrops, steep slopes, and frequent microtopographic changes, as well as benthic life. The distribution and relation of various features with one another can also be used to understand the possible impact of nodule mining on the seabed. Estimates show that for a yield of 3 million tonnes of nodules per year, the volume of sediment disturbed will be between 200 × 107 and 500 × 107 m3over an area of 300–600 km2, depending upon the average abundance of nodules. Hence, the nodule collector will have to be a self‐propelled system, with photographic and acoustic sensors, to enable selective mining and avoid unfavorable areas. 相似文献
8.
P. Justy W. Siwabessy Maggie Tran Kim Picard Brendan P. Brooke Zhi Huang Neil Smit David K. Williams William A. Nicholas Scott L. Nichol Ian Atkinson 《Marine Geophysical Researches》2018,39(1-2):249-269
Spatial information on the distribution of seabed substrate types in high use coastal areas is essential to support their effective management and environmental monitoring. For Darwin Harbour, a rapidly developing port in northern Australia, the distribution of hard substrate is poorly documented but known to influence the location and composition of important benthic biological communities (corals, sponges). In this study, we use angular backscatter response curves to model the distribution of hard seabed in the subtidal areas of Darwin Harbour. The angular backscatter response curve data were extracted from multibeam sonar data and analysed against backscatter intensity for sites observed from seabed video to be representative of “hard” seabed. Data from these sites were consolidated into an “average curve”, which became a reference curve that was in turn compared to all other angular backscatter response curves using the Kolmogorov–Smirnov goodness-of-fit. The output was used to generate interpolated spatial predictions of the probability of hard seabed (p-hard) and derived hard seabed parameters for the mapped area of Darwin Harbour. The results agree well with the ground truth data with an overall classification accuracy of 75% and an area under curve measure of 0.79, and with modelled bed shear stress for the Harbour. Limitations of this technique are discussed with attention to discrepancies between the video and acoustic results, such as in areas where sediment forms a veneer over hard substrate. 相似文献
9.
为研究小尺度海底沉积物样品的声衰减特性,作者提出了用声学探针测量海底沉积物声波幅值的新方法,对沉积物样品扰动小,两个测量点的距离可小于波长,为海底沉积物微观声衰减测量提供了新手段。作者用小于波长的间隔逐点测量了沉积物的压缩波幅值,数据分析表明沿沉积物柱状样全长的声衰减满足指数衰减模型。目前主要用同轴差距衰减测量法获得海底沉积物声衰减数据,但该方法不能辨识声衰减模型,因此不同海区的测量结果难以建立联系。对此作者又提出用声吸收系数反演的幅值比与声衰减系数反演的R值(两种幅值比的比值)作评价依据,分析了垂直轴差距衰减测量法获得的南海海底沉积物声衰减测量数据,发现部分沉积物样品声衰减的R值远大于1,其声衰减不满足指数衰减模型。在声衰减满足指数衰减模型的条件下,用Hamilton的声衰减和频率经验公式预报的南海沉积物声衰减比与作者用声学探针测量海底沉积物所得的声衰减比对比,通过对R值分析得出Hamilton的声衰减和频率经验公式可以预报南海沉积物声衰减比的范围。作者提出的声学探针测量海底沉积物声衰减的方法的优点是既能获得声衰减数据又能辨识声衰减模型,不同海区测量的沉积物声衰减比可用R值建立联系。 相似文献
10.
Jenkins S.A. Inman D.L. Richardson M.D. Wever T.F. Wasyl J. 《Oceanic Engineering, IEEE Journal of》2007,32(1):78-90
A process-based, numerical, hydrodynamic vortex lattice mine scour/burial model (VORTEX) is presented that simulates scour and burial of objects of arbitrary shape resting on a granular bed in the nearshore. There are two domains in the model formulation: a far-field where burial and exposure occur due to changes in the elevation of the seabed and a near-field involving scour and transport of sediment by the vortices shed from the object. The far-field burial mechanisms are based on changes in the equilibrium bottom profiles in response to seasonal changes in wave climate and accretion/erosion waves spawned by fluxes of sediment into the littoral cell. The near-field domain consists of one grid cell extracted from the far-field that is subdivided into a rectangular lattice of panels having sufficient resolution to define the shape of the object. The vortex field induced by the object is constructed from an assemblage of horseshoe vortices excited by local pressure gradients and shear over the lattice panels. The horseshoe vortices of each lattice panel release a pair of vortex filaments into the neighboring flow. The induced velocity of these trailing vortex filaments causes scour of the neighboring seabed and induces hydrodynamic forces on the object. Scour around the object and its subsequent movement into the scour depression contribute to burial, while far-field changes in local sand level may increase burial depth or expose the object. Scour and burial predictions of mines and mine-like objects were tested in field experiments conducted in the nearshore waters off the Pacific coast of California at Scripps Pier, the Gulf Coast of Florida at Indian Rocks, and off the Atlantic coast of Massachusetts at Martha's Vineyard. Model predictions of mine scour and burial are in reasonable agreement with field measurements and underwater photographs. 相似文献
11.
Knowledge of the extent of burial of bottom sitting sea mines is critical to mine detection due to the significantly degraded capabilities of mine-hunting systems when the mines are buried. To provide an enhanced capability for predicting mine burial in support of U.S. Navy mine countermeasure (MCM) operations, an expert system approach to predicting sea mine burial has been developed. This expert system serves as a means to synthesize previous and current research on sea mine burial due to impact upon deployment and subsequently due to scour, the two dominant burial mechanisms in littoral waters. Prediction systems for impact and scour burial have been implemented as simple Bayesian networks whose probabilistic basis provides means of accounting for the inherent uncertainties associated with mine deployment methods, simplified physics-based burial models, and environmental variability. Examples of burial predictions and comparisons to results from field experiments are illustrated. In addition, a proposed risk metric is developed and applied to provide a geospatial mapping of mine burial probability. 相似文献
12.
A large number of 3D deep seismic surveys in the Faroe-Shetland Channel gives continuous coverage over most of the region. These surveys were designed primarily to image depths in excess of 4 km, use low frequency sources and are recorded at low temporal sample rates. However, commercial 3D data can generate highly detailed images of the seabed due to the high spatial sample rate, typically 12.5 m. This is particularly true in waters below 200 m. Despite geophysical artefacts, the images reveal that there are a number of sedimentary processes at work adjacent to and within this channel. On the West Shetland Shelf, iceberg scouring and moraines reflect the impact of glaciation. On the West Shetland slope there is clear evidence for down-slope processes, such as debris flows, linear erosion channels, basal fans and (one case) slope failure. Along-slope processes are also active as indicated by the presence of sediment waves and contourite mounds. On the floor of the basin, polygonal cracking can be observed. The most spectacular feature appears to be the Judd Deeps, a system of cliffs approximately 200 m high and 40 km across. Traditionally, seabed investigation has been performed using high-resolution surveys. This study shows that deep exploration data can also provide useful images of the seafloor. 相似文献
13.
The deep ocean floor between the Clarion and Clipperton fracture zones (NE equatorial Pacific) has the highest known manganese nodule abundance in the world oceans. A detailed analysis of MR1 (Mapping Researcher 1, 11-12 kHz) sonar images and free-fall grab data in the Korean manganese nodule field areas reveals a close relationship between side-scan sonar characteristics of the seafloor and manganese nodule abundance. Eight sonar facies are identified based on back-scattering intensity and distribution patterns. These sonar facies can be interpreted as (1) volcanic seamounts (facies I-1), (2) bounding faults of abyssal hills (facies I-2 and II-1), (3) lava flows or volcanoclastic mass-flow deposits around the volcanic seamounts (facies I-3 and II-2), (4) crests of abyssal hills (facies II-1), (5) abyssal troughs between abyssal hills (facies III-1), (6) relatively flat areas (facies II-3 and III-2). In the areas where facies II-1 (abyssal hill crests with thin sediment cover) and II-3 (relatively flat areas draped by thin sediments) are dominant, manganese nodules occur abundantly. In contrast, zones comprising facies III-1 (abyssal troughs with thick sediment cover) and III-2 (relatively flat areas covered by thick sediments) are characterized by low abundance of manganese nodules. This relationship between distribution of sonar facies and manganese nodule abundance implies that (1) the qualitative difference in acoustic reflectivity of long-range side-scan sonar with some ground truth data is useful for regional assessment of manganese nodule occurrence over wide areas in a reasonable time, and (2) seafloor topography and sediment thickness are important controlling factors for regional occurrences of manganese nodules. 相似文献
14.
Pockmarks are observed worldwide along the continental margins and are inferred to be indicators of fluid expulsion. In the present study, we have analysed multibeam bathymetry and 2D/3D seismic data from the south-western Barents Sea, in relation to gas hydrate stability field and sediment type, to examine pockmark genesis. Seismic attributes of the sediments at and beneath the seafloor have been analysed to study the factors related to pockmark formation. The seabed depths in the study area are just outside the methane hydrate stability field, but the presence of higher order hydrocarbon gases such as ethane and/or propane in the expelled fluids may cause localised gas hydrate formation. The selective occurrence of pockmarks in regions of specific seabed sediment types indicates that their formation is more closely related to the type of seabed sediment than the source path of fluid venting such as faults. The presence of high acoustic backscatter amplitudes at the centre of the pockmarks indicates harder/coarser sediments, likely linked to removal of soft material. The pockmarks show high seismic reflection amplitudes along their fringes indicating deposition of carbonates precipitated from upwelling fluids. High seismic amplitude gas anomalies underlying the region away from the pockmarks indicate active fluid flow from hydrocarbon source rocks beneath, which is blocked by overlying less permeable formations. In areas of consolidated sediments, the upward flow is limited to open fault locations, while soft sediment areas allow diffused flow of fluids and hence formation of pockmarks over a wider region, through removal of fine-grained material. 相似文献
15.
Thomas A. Schlacher Alan Williams Franziska Althaus & Monika A. Schlacher-Hoenlinger 《Marine Ecology》2010,31(1):200-221
Submarine canyons increase seascape diversity on continental margins and harbour diverse and abundant biota vulnerable to fishing. Because many canyons are fished, there is an increasing emphasis on including them in conservation areas on continental margins. Here we report on sponge diversity and bottom cover in three canyons of South-eastern Australia, test the performance of biological and abiotic surrogates, and evaluate how biological data from detailed seabed surveys can be used in conservation planning in these habitats. The biological data on sponge assemblage structure and species richness were obtained from 576 seafloor images taken between 148 and 472 m depth, yielding 65 morphospecies. Seafloor characteristics were similar within and between canyons, being almost exclusively composed of sediments with very few rocky substrates of higher relief. This environmental homogeneity did not, however, translate into biological uniformity of the megabenthos, and environmental factors were consequently poor predictors of biological features. By contrast, total bottom cover of sponges was highly correlated with species richness and served as a good proxy for species-level data in this situation. Design strategies that employ information on cover or richness of sponges provided a large dividend in conservation effort by dramatically reducing the number of spatial units required to achieve a specified conservation target of 50–90% of species to be included in reserves. This demonstrates that image-derived data are useful for the design of reserves in the deep sea, particularly where extractive sampling is not warranted. Using biological data on the sponge megabenthos to identify conservation units can also minimise socio-economic costs to fisheries because of a smaller geographic and bathymetric ambit of conservation areas. 相似文献
16.
海底浅表层（小于1 m）沉积物的物理性质,如粒度、孔隙度、密度等是海洋沉积学研究和海洋工程地质分析的重要内容,目前主要基于有限的海底取样或原位测试获取这些沉积物的物理性质。浅地层剖面是基于声学信号（频率几千赫兹）在沉积物中的传播得到可反映沉积地层结构的数据,其中的一些声学参数,如海底反射系数、波阻抗等与沉积物物理性质密切相关。如何充分而有效地利用浅地层剖面资料,反演得到剖面覆盖区海底浅表层沉积物的物理性质参数,极具科学意义和应用价值,且基于声学属性反演沉积物物理性质是当前研究的热点。为此,本文基于渤海LD16-3CEPA至LD10-1PAPD路由段的浅地层剖面数据和海底表层沉积物的实测物理参数,利用Biot-Stoll模型建立研究区海底反射系数和沉积物物理性质之间的关系,并基于浅地层剖面数据计算得到的海底反射系数,反演了研究区海底浅表层沉积物的孔隙度、密度、平均粒径等物理性质参数。其中反演的孔隙度、密度、平均粒径与实测孔隙度、密度、平均粒径基本相符,偏差度基本都在20%的偏差范围内,表明该反演方法在该区的应用是可行的。 相似文献
17.
An overview of SAX99: acoustic measurements 总被引：5，自引：0，他引：5
Thorsos E.I. Williams K.L. Chotiros N.P. Christoff J.T. Commander K.W. Greenlaw C.F. Holliday D.V. Jackson D.R. Lopes J.L. McGehee D.E. Piper J.E. Richardson M.D. Dajun Tang 《Oceanic Engineering, IEEE Journal of》2001,26(1):4-25
A high-frequency acoustic experiment was performed at a site 2 km from shore on the Florida Panhandle near Fort Walton Beach in water of 18-19 m depth. The goal of the experiment was, for high-frequency acoustic fields (mostly In the 10-300-kHz range), to quantify backscattering from the seafloor sediment, penetration into the sediment, and propagation within the sediment. In addition, spheres and other objects were used to gather data on acoustic detection of buried objects. The high-frequency acoustic interaction with the medium sand sediment was investigated at grazing angles both above and below the critical angle of about 30°. Detailed characterizations of the upper seafloor physical properties were made to aid in quantifying the acoustic interaction with the seafloor. Biological processes within the seabed and the water column were also investigated with the goal of understanding their impact on acoustic properties. This paper summarizes the topics that motivated the experiment, outlines the scope of the measurements done, and presents preliminary acoustics results 相似文献
18.
Analyzing Uncertainty in Multibeam Bathymetric Data and the Impact on Derived Seafloor Attributes 总被引：2，自引：0，他引：2
Multibeam bathymetric data provide critical information for the modeling of seabed geology and benthic biodiversity. The accuracy of these models depends on the accuracy of the bathymetric data, which contain uncertainties that are stochastic at individual soundings but exhibit a distinct spatial distribution with increasing magnitude from nadir to the outer beams. A restricted spatial randomness method that simulates both the stochastic and spatial characteristics of the data uncertainty performed better than a complete spatial randomness method in analyzing the impact of bathymetric data uncertainty on derived seafloor attributes. 相似文献
19.
Rahul Sharma 《Marine Georesources & Geotechnology》2000,18(3):237-250
Observations on seafloor features from subbottom profiling and seabed photography data show that the undisturbed and natural conditions before the benthic disturbance undergo a substantial change after operation of the disturber. The effects can be seen in the form of deep trenches and grooves, formed by the action of the sleds and the pumping of the sediment along its path, as well as sediment piles on either side of the track. Biological traces such as fecal coils, casts, tubes, burrows, and trails get obliterated in the areas of disturbance and resedimentation. The smooth, uniform nature of the seafloor observed in predisturbance phase shows microtopographic changes in and around the disturbed area as a result of sediment excavation and resettlement. Vertical mixing as well as lateral transport of sediment alter the geological, biological, physical, and chemical conditions on the seafloor, which need to be monitored over time to assess the process and the time taken for restoration of environmental conditions. 相似文献
20.
Acoustic signals from small explosive charges have been measured with sonobuoys on twelve tracks in Australian northern shallow waters with the aim of assessing whether useful geoacoustic information could be obtained. Using the frequency band from 14 to 70 Hz, travel times of head waves were monitored, and the sound speeds and depths of corresponding interfaces in the seabed were derived. The water sound speed varied a little with range, and its depth dependence was allowed for by using its average value. Head waves from interfaces indistinguishable from the seafloor (the water/seabed interface) were detected on only three of the tracks, with derived sound speeds of 2100 to 2300 m/s. The first sub-bottom interfaces were from 50 to 600 m beneath the seafloor, and their sound speeds ranged from around 2000 m/s to 6400 m/s. Thus the head waves were from chalk or limestone, cemented sediments in which sound-speed gradients would be small. The amount of data obtained for the seafloor was limited by incoherence of the signals and, for some tracks, by excessive spacing between shots. The incoherence is generally attributed to multiple head waves that are individually unresolvable, while on two tracks there were indications of medal ground waves. Occasional anomalous data were obtained, but generally the assumptions of the simple interpretation method were found to be valid. Since no curvature in the range-time lines was observed, there was no evidence of sub-bottom sound-speed gradients being significant 相似文献