共查询到20条相似文献，搜索用时 171 毫秒
1.
The maximum shear modulus of soil is a principal parameter for the design of earth structures under static and dynamic loads. In this study, the statistical data of the maximum shear moduli of reclaimed ground in the Songdo area on the western coast of Korea were evaluated using various field and laboratory tests, including the standard penetration test (SPT), piezocone penetration test (CPTu), self-boring pressure meter test (SBPT), down-hole seismic test (DHT), seismic piezocone penetration test (SCPTu) and resonant column test (RCT). Soils were classified variously by using a conventional unified soil classification system and classification charts for CPTu data. For the soils containing mostly sand and silt, the soil classifications using the classification charts for CPTu data show good agreement with the unified soil classification. Based on the statistical analysis on various maximum shear moduli, new site-specific empirical correlations between the shear moduli and SPT and CPTu values were proposed. Predictions of the maximum shear moduli using the proposed correlations were compared with the data obtained from the DHT, which is comparatively exact in evaluating the maximum stiffness of soils. The good agreement confirmed that the proposed correlations reasonably predicted the maximum shear moduli of soils in western coastal area of Korea. 相似文献
2.
Xueliang Zhao 《Marine Georesources & Geotechnology》2013,31(3):272-281
The standard penetration test (SPT) and cone penetration test (CPT) are the two most commonly used in-situ tests. In this paper, SPT-CPT correlation is investigated using statistical and regression method based on a database of in-situ tests. Two correlation equations of the SPT N-value and the CPT cone tip resistance qc are proposed. The equations are applied for the liquefaction potential evaluation. Three effect factors including the soil type, mean particle size, and fine content are investigated for SPT-CPT correlation. The simple correlation can be used for the preliminary site investigation with least data and information. The comprehensive one can give more accurate result with detailed data. These two correlation equations are useful for different purposes with different accuracies. The liquefaction evaluations using the proposed correlation method are compared with those from the Chinese code method. It is shown that the proposed correlation can be helpful for site investigation and geotechnical design in practice. 相似文献
3.
海床式静力触探设备工作效率高,能够实现从垂向上对地层的连续探测,数据分辨率较好。通过对黄河口海域3个静力触探孔和1个地质钻孔的分析,将研究区20m以浅地层自上而下划分为粉土、粉质黏土、粉土夹粉砂或粉砂、粉质黏土、粉土五层,静力触探曲线对粉土层中的硬壳层和粉质黏土层中的贝壳夹层等特殊地质现象有很好的反映。对粉质黏土的静力触探参数与物理力学参数进行相关性分析,得到适合该区域的回归方程。采用基于CPT数据的液化判别法,对研究区表层粉土液化可能性进行评判,通过Seed简化法计算的周期应力比(CSR)与Olsen法计算的周期阻力比(CRR)的大小比较,得出当抗震设防烈度为7度时,研究区表层粉土不会液化,当抗震设防烈度为8度时,粉土层将发生液化,计算最大液化深度3.7m。 相似文献
4.
Simplified techniques based on in situ testing methods are commonly used to predict liquefaction potential. Many of these simplified methods are based on finding the liquefaction boundary separating two categories (the occurrence or non-occurrence of liquefaction) through the analysis of liquefaction case histories. As the liquefaction classification problem is highly nonlinear in nature, it is difficult to develop a comprehensive model taking into account all the independent variables, such as the seismic and soil properties, using conventional modeling techniques. Hence, in many of the conventional methods that have been proposed, simplified assumptions have been made. In this study, an updated support vector machine (SVM) based on particle swarm optimization (PSO) is used to evaluate liquefaction potential in two separate case studies. One case is based on standard penetration test (SPT) data and the other is based on cone penetration test (CPT) data. The SVM model effectively explores the relationship between the independent and dependent variables without any assumptions about the relationship between the various variables. This study serves to demonstrate that the SVM can “discover” the intrinsic relationship between the seismic and soil parameters and the liquefaction potential. Comparisons indicate that the SVM models perform far better than the conventional methods in predicting the occurrence or non-occurrence of liquefaction. 相似文献
5.
Simplified techniques based on in situ testing methods are commonly used to predict liquefaction potential. Many of these simplified methods are based on finding the liquefaction boundary separating two categories (the occurrence or non-occurrence of liquefaction) through the analysis of liquefaction case histories. As the liquefaction classification problem is highly nonlinear in nature, it is difficult to develop a comprehensive model taking into account all the independent variables, such as the seismic and soil properties, using conventional modeling techniques. Hence, in many of the conventional methods that have been proposed, simplified assumptions have been made. In this study, an updated support vector machine (SVM) based on particle swarm optimization (PSO) is used to evaluate liquefaction potential in two separate case studies. One case is based on standard penetration test (SPT) data and the other is based on cone penetration test (CPT) data. The SVM model effectively explores the relationship between the independent and dependent variables without any assumptions about the relationship between the various variables. This study serves to demonstrate that the SVM can “discover” the intrinsic relationship between the seismic and soil parameters and the liquefaction potential. Comparisons indicate that the SVM models perform far better than the conventional methods in predicting the occurrence or non-occurrence of liquefaction. 相似文献
6.
The liquefaction resistance of the soils used to be estimated through the in situ tests, such as standard penetration test and cone penetration test; or by means of cyclic triaxial test in laboratory. However, both in situ tests and cyclic triaxial test are time-consuming and costly; this study introduces a quick and cost-effective method to evaluate the liquefaction resistance of soils under certain confining pressure in laboratory. A particular device modified from the conventional triaxial compression test apparatus, namely “Triaxial Cone Penetration Test”, was developed to obtain the peak values of cone resistance in soils so as to correlate the liquefaction resistance of the reclaimed soils evaluated by cyclic triaxial tests. The test result indicates a good correlation between the peak value of cone resistance and the corresponding cyclic stress ratio (CSR) at the state of initial liquefaction, in which the correlation for loose samples is better than that for dense samples. Besides, both peak values of cone resistance and corresponding CSR increase with fine content of soils reaches 10% and decreased with fine content varying between 10% and 50%. By examining the compositions of the soils with scanning electron microscopy and X-ray diffraction, it is found that the proportion and characteristics of the fines plays an important role on the liquefaction resistance of the reclaimed soils. 相似文献
7.
8.
近年来,在天津沿海地区的工程勘察中,积累了大量的静力触探参数资料与地基土层的物理力学参数资料。利用计算机的EXCEL数据处理软件,将各地基土层的地基土物理力学参数统计平均,同时将相应土层的静力触探参数统计平均,然后对平均后的数据进行统计回归,得到静力触探参数(锥尖阻力qc与侧摩阻力fs)与地基土层物理力学参数(天然含水量ω、天然密度ρ、孔隙比e、压缩系数a及压缩模量Es)间的统计回归方程。在天津沿海地区进行工程勘察时,利用所得方程可从静力触探参数(或土体物理力学参数)方便地得到土体物理力学参数(或静力触探参数),进而可以节约外业勘察或室内试验的工作量。 相似文献
9.
Piezocone penetration test(CPTu), the preferred in-situ tool for submarine investigation, is significant for soil classification and soil depth profile prediction, which can be used to predict soil types and states. However, the accuracy of these methods needs to be validated for local conditions. To distinguish and evaluate the properties of the shallow surface sediments in Chengdao area of the Yellow River Delta, seabed CPTu tests were carried out at ten stations in this area. Nine soil classi... 相似文献
10.
11.
承受水平荷载作用的桩基,规范中常采用m法进行桩基水平承载力的计算,地基土水平地基抗力系数的比例系数m值在规范中根据地基土的状态、类别以表格给出。在地基勘察中,现在广泛采用静力触探试验。直接利用静力触探数据给出比例系数m值。将使桩基设计所用参数更加直接准确。本文利用天津地区地层大量静力触探资料与地基土状态数据,利用统计分析回归方法,总结出地基土的液性指数IL与静力触探参数锥尖阻力qc及摩阻比Rf间的关系式,针对天津的地层土体,给出利用静力触探资料查用m值的表格,为桩基的设计计算提供资料。 相似文献
12.
Chunxia Huang Zhilong Sui Lei Wang Kaifu Liu 《Marine Georesources & Geotechnology》2016,34(3):244-251
The risk of liquefaction and associated ground deformation may be reduced by using various ground-improvement methods, including the stone column technique. To examine the effects of stone columns, a shaking table experimental study using four models (two containing saturated sand and two containing stone column composite foundations) was conducted to measure the development and dissipation of excess pore water pressure and the acceleration response during a simulated earthquake. The test results demonstrate that the effectiveness of stone columns for mitigation of soil liquefaction during an earthquake depends on the following three aspects: (1) the densification of the surrounding soils; (2) drainage along the stone column; and (3) reduction in the total cyclic shear stress of the soil (because the cyclic shear stress is partially shared by the stone column). The first factor (the densification of the surrounding soils) is the most prominent factor among these three. The drainage and re-distribution of the shear stress can only develop fully for sand ground with a considerably higher density; thus, the effectiveness of the last two factors are only significant for dense sand ground. 相似文献
13.
The multi-spring shear mechanism plastic model in this paper is defined in strain space to simulate pore pressure generation and development in sands under cyclic loading and undrained conditions,and the rotation of principal stresses can also be simulated by the model with cyclic behavior of anisotropic consolidated sands.Seismic residual deformations of typical caisson quay walls under different engineering situations are analyzed in detail by the plastic model,and then an index of liquefaction extent is applied to describe the regularity of seismic residual deformation of caisson quay wall top under different engineering situations.Some correlated prediction formulas are derived from the results of regression analysis between seismic residual deformation of quay wall top and extent of liquefaction in the relative safety backfill sand site.Finally,the rationality and the reliability of the prediction methods are validated by test results of a 120 g-centrifuge shaking table,and the comparisons show that some reliable seismic residual deformation of caisson quay can be predicted by appropriate prediction formulas and appropriate index of liquefaction extent. 相似文献
14.
Shin’ichi Sato Yoshitaka Kaneko Hiroshi Torii Jae-Sang Hong 《Ocean Science Journal》2016,51(3):455-463
The objectives of this study were to distinguish fossil specimens of Meretrix (Bivalvia, Veneridae) using discriminant score and multivariate analysis, and to examine temporal changes in the geographical distributions of M. lusoria and M. petechialis in Japan and South Korea. Fossil shells of Meretrix were collected from Miyagi, Fukui, Aichi and Kumamoto in Japan, and Gimhae, Seosan, Siheung and Ganghwa-do in South Korea. The outside of the right valve was photographed with a digital camera, and ten characteristics of the shell morphology, such as shell height and shell length, were measured using image analysis software and a digital slide caliper. The discriminant score and multivariate analysis of the shell morphology identified all of the examined fossils as M. lusoria, while living individuals collected from the western coast of South Korea were identified as M. petechialis. These results suggest that the fossil shells excavated from the western coast of South Korea are a different species from the living individuals collected from the same areas. Radioactive carbon isotopic results revealed that the ages of the four fossil shells collected from tidal flats in Ganghwa-do ranged between 3,270 ± 30 and 1,830 ± 30 Cal BP. These results suggest that M. lusoria inhabited the western coast of South Korea until at least 2,000 years ago, but was replaced by M. petechialis during the last 2,000 years. Therefore, we propose that either M. petechialis spats were introduced artificially, or planktonic larvae migrated naturally from China to the western coast of South Korea during the last 2,000 years. 相似文献
15.
根据浅地层地震剖面的解译结果,对南黄海西部滨浅海区灾害地质要素进行了识别。结果表明,研究区存在多种灾害地质要素,包括海岸侵蚀与淤积、水下浅滩、浅层气、埋藏古河道和古三角洲、沙脊、陡坡、沙层液化、冲蚀沟槽、滑坡、差异性压实断层等等。探讨了灾害地质要素的特征和分布规律,并绘制了主要灾害地质要素分布图。 相似文献
16.
波浪作用下埕岛海域海底土液化分区 总被引：1，自引：0，他引：1
根据埕岛海域表层沉积物特征,结合该区的波浪实测资料推算的波浪要素,利用动三轴实验得到研究区土体在循环荷载作用下孔隙水压力的增长与振动次数的关系,计算研究区内海底土层的液化可能性和液化所需的时间,并根据土体在不同水深情况下达到液化所需的时间对研究海域进行了液化分区。结果显示,7-8 m等深线之间的海底土体由于受到波浪破碎作用的影响,最易发生液化,液化影响深度也最深,自该海域向近岸和远海,液化可能性降低;土层埋深为2.5 m以浅时,研究区大部分区域液化可能性为高,而到埋深为4 m时土层液化可能性明显降低。 相似文献
17.
海底浅表层不同土类静力触探参数与物理力学性质对比研究 总被引：1，自引：0，他引：1
海底土的物理、力学特性是海洋地质学、海洋土工学、海洋地质灾害等调查研究及海洋资源开发环境条件调查和评价等方面非常重要的资料,海底静力触探试验(CPT)是获取这方面资料的一种快速高效、成本低、测试精度高的原位测试方法。它可同时获取海底土锥尖阻力、侧摩阻力等方面的连续原位测试数据,这些数据与海底土取样样品测试分析资料及物探资料结合,可对海底土的工程特性等作比较全面的分析和评价。本文对采集的海底土样的静力触探参数与海底土样的物理力学指标进行相关分析,分粘性土和砂类土二类,建立了海底浅表层土的静力触探参数与物理力学指标之间的相关方程。利用相关方程可以通过静力触探的数据来推算土的物理力学指标,进而对海底土的工程情况作较全面的评价。 相似文献
18.
Ali Ghorbani Reyhaneh Jahanpour Hadi Hasanzadehshooiili 《Marine Georesources & Geotechnology》2020,38(1):1-22
AbstractAn elastoplastic, dynamic, finite-difference method was applied to study the effects of nonlinear seismic soil–pile interaction on the liquefaction potential of marine sand with piles. The developed model was well validated using the centrifuge test. The results showed that acceleration, bending moment, and excess pore water pressure complied well with centrifuge test results. The effect of different affecting parameters on liquefaction potential was investigated using parametric study. Using a sensitivity analysis, the pile embedment parameter was shown to be the most influential parameter. Finally, applying the evolutionary polynomial regression technique, a new model for predicting the liquefaction potential was presented. 相似文献
19.
Dong-Kyu Lee Peter Niiler 《Deep Sea Research Part I: Oceanographic Research Papers》2010,57(10):1222-1232
The mean circulation of the surface layer of the southwestern Japan/East Sea (JES) was examined using current measurements collected at 15 m by satellite-tracked drifters and merged sea level anomalies from satellite altimeters. The study of circulation patterns in this paper focused on the inflow passing through the western channel of the Korea Strait from the East China Sea. Empirical Orthogonal Function (EOF) analysis of non-seasonal sea level anomalies revealed that significant energy in the circulation pattern of Ulleung Basin was controlled by the inflow conditions through the Korea Strait. Three circulation patterns were identified that depended on the initial relative vorticity of the inflow. When inflow had initially large negative vorticity, the flow gained more negative vorticity due to deepening of the bottom (stretching) and then turned right after entering the JES. The inflow then followed the path of the Tsushima Warm Current along the coast of Japan. When the inflow was strong, with a speed in excess of 55 cm/s and with a large positive vorticity, potential vorticity appeared to be conserved. In this case, the EKWC followed isobaths along the coast and then left the coast, following topographic features north of Ulleung-Do. The northward flowing jet developed inertial meandering after leaving the coast, which is a characteristic of many western boundary currents. The regular, bimonthly deployments of drifters in the western portion of the Korea Strait revealed that splitting or branching of the flow through the western channel of the Korea Strait occurred only 15% of the time. And splitting or branching rarely occurred during the fall and winter seasons, when the inflow splitting was previously reported in hydrographic surveys. The time-averaged circulation map of the EKWC and its seaward extension were considerably enhanced by using regularly sampled geostrophic velocities calculated from sea level anomalies to remove biases in the mean velocity that were caused by irregular spatial and temporal drifter observations. The East Korean Warm Current, a mean coastal current along the Korean coast, behaved like the simple model by Arruda et al. (2004) in which the generation of the Ulleung Warm Eddy and the meandering circulation pattern were well reproduced. 相似文献
20.
Study on Wave-influenced resistance to erosion of silty soil in Huanghe (Yellow) River Delta 总被引：2，自引：1，他引：1
Along with the reduction of sediment yield of the Huanghe (Yellow) River, the erosion of the Huanghe River Delta aggravates, which has becomes an important factor that threatens the coastal protection structures. Starting from the study of the erosion resistibility of the sediment, this paper explores the internal mechanism of erosion phenomenon. This paper takes Diaokou as the study area and takes soils as samples which are mixed with clay into reconstructed samples whose ratio of clay content are 5%, 10%, 15%, 20% respectively, then dynamic tri-axial apparatus is applied to simulate wave loads of different intensity; then the resistibility of soil to erosion is determined via concentrated flow test and the structural property is determined via the disintegration test. Finally, the resistibility to erosion and the structural property of the non-compressed soil samples are compared with the compressed data. The results indicates that liquefaction failure exerts significant influence on the resistibility to erosion and the structural property of the silty soil in the Huanghe River Delta. Therefore, in the future erosion studies, the liquefaction phenomenon shall be fully considered. 相似文献