首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
We have relocated the twenty-eight largest magnitude (4.3M s 7.3) historical (1922–1963) earthquakes of the southeastern Caribbean. We also present new focal mechanisms for seven of these events. The relocations are based on reported ISSP andS arrival times that we analyzed using generalized linear inversion techniques. The new focal mechanisms were constrained by first motionP polarities as reported by the ISS and as picked by us where records were available, and by the polarities and ratios ofSH andsSH, andSV andsSV arrivals that we determined from seismograms. The results of the relocations are commensurate with the distribution of seismicity observed in the recent era: hypocenters are shallow and intermediate in depth (0–200 km), and the events occur almost exclusively in areas known to be currently seismic. The frequent seismic activity in the vicinity of the Paria Peninsula, Venezuela, is clearly a persistent feature of the regional earthquake pattern; intermediate depth earthquakes indicative of subduction beneath the Caribbean plate occur here and along the Lesser Antilles arc. The Grenadines seismic gap is confirmed as an area of low seismic moment release throughout the historical era. Trinidad and the eastern Gulf of Paria were also largely quiescent.The new focal mechanisms, despite being a sparse data set, give significant insight into both subduction processes along the Lesser Antilles arc and into the shallow deformation of the Caribbean-South America plate boundary zone. The largest earthquake to have occurred in this region, the 19 March 1953 event (M m =7.01), is a Lesser Antilles slab deformation event, and another earthquake in this region of the Lesser Antilles is probably a rarely-observed interplate thrust event. Shallow deformation in the plate boundary zone is complex and, near the Paria Penninsula, involves mixed southeastward thrusting and dextral strike-slip on east-striking faults, and secondarily, normal faulting. Bending of the subducting Atlantic-South American plate also seems to generate seisms. The rather high ratio of intraplate deformation to interplate deformation observed along the Lesser Antilles subduction zone in the more recent era seems to have been operative in the historical era as well.  相似文献   

2.
Slip partitioning along major convergent plate boundaries   总被引:3,自引:0,他引:3  
Along plate boundaries characterized by oblique convergence, earthquake slip vectors are commonly rotated toward the normal of the trench with respect to predicted plate motion vectors. Consequently, relative plate motion along such convergent margins must be partitioned between displacements along the thrust plate interface and deformation within the forearc and back-arc regions. The deformation behind the trench may take the form of strike-slip motion, back-arc extension, or some combination of both. We observe from our analysis of the Harvard Moment Tensor Catalog that convergent arcs characterized by back-arc spreading, specifically the Marianas and New Hebrides, are characterized by a large degree of slip partitioning. However, the observed rates, directions, and location of back-arc spreading are not sufficient to account for degree of partitioning observed along the respective arcs, implying that the oblique component of subduction is also accommodated in part by shearing of the overriding plate. In the case of the Sumatran arc, where partitioning is accommodated by strike-slip faulting in the overriding plate, the degree of partitioning is similar to that observed along the Marianas, but the result is viewed with caution because it is based on a predicted plate motion vector that is based on locally derived earthquake slip vectors. In the case of the Alaskan-Aleutian arc, where back-arc spreading is also absent, the degree of partitioning is less and rotation of slip vectors toward the trench normal appears to increase linearly as a function of the obliquity of convergence. If partitioning in the Alaskan-Aleutian arc is accommodated by strike-slip faulting within the upper plate, the positive relationship between obliquity of convergence and the rotation of earthquake slip vectors to the trench normal may reflect that either (1) the ratio of the depth extent of strike-slip faults behind the trenchZ s to the subduction thrustZ t increases westward along the arc, (2) the dip of the subduction thrust increases westward along the arc, or (3) the strength of the subduction thrust decreases westward along the arc.  相似文献   

3.
The morphology of the Wadati-Benioff zone in the region of Kamchatka, the Kurile Islands and Hokkaido, based on the distribution of 6319 earthquake foci, has verified the existence of an intermediate-depth aseismic gap and its relation to active andesitic volcanism. It appeared that deep-focus earthquakes in this region belong to a paleosubduction zone activated by an intermediate-depth collision with the active subduction zone in the area of Hokkaido. A system of deep seismically active fracture zones was delineated in the continental plate and confirmed by the results of deep seismic sounding. Two of these fractures, dipping toward the subduction zone, may be considered as the principal feeding channels for active and Holocene volcanoes of the continental volcanic bels of Kamchatka.  相似文献   

4.
Maximum earthquake size varies considerably amongst the subduction zones. This has been interpreted as a variation in the seismic coupling, which is presumably related to the mechanical conditions of the fault zone. The rupture process of a great earthquake indicates the distribution of strong (asperities) and weak regions of the fault. The rupture process of three great earthquakes (1963 Kurile Islands, MW = 8.5; 1965 Rat Islands, MW = 8.7; 1964 Alaska, MW = 9.2) are studied by using WWSSN stations in the core shadow zone. Diffraction around the core attenuates the P-wave amplitudes such that on-scale long-period P-waves are recorded. There are striking differences between the seismograms of the great earthquakes; the Alaskan earthquake has the largest amplitude and a very long-period nature, while the Kurile Islands earthquake appears to be a sequence of magnitude 7.5 events.The source time functions are deconvolved from the observed records. The Kurile Islands rupture process is characterized by the breaking of asperities with a length scale of 40–60 km, and for the Alaskan earthquake the dominant length scale in the epicentral region is 140–200 km. The variation of length scale and MW suggests that larger asperities cause larger earthquakes. The source time function of the 1979 Colombia earthquake (MW = 8.3) is also deconvolved. This earthquake is characterized by a single asperity of length scale 100–120 km, which is consistent with the above pattern, as the Colombia subduction zone was previously ruptured by a great (MW = 8.8) earthquake in 1906.The main result is that maximum earthquake size is related to the asperity distribution on the fault. The subduction zones with the largest earthquakes have very large asperities (e.g. the Alaskan earthquake), while the zones with the smaller great earthquakes (e.g. Kurile Islands) have smaller scattered asperities.  相似文献   

5.
日本俯冲带应力产生与传播的数值模拟   总被引:7,自引:2,他引:7       下载免费PDF全文
用三维有限元模拟了日本地冲带,分析了板块推力、板块拉力、动态闭锁断层和解耦板间地震对上覆板块内部应力状态的贡献,表明大洋板块推力是海沟。岛弧地区挤压应力的主要来源,这种应力仅有小部分传播到上覆板块内部,软流圈的蠕变能促进这个应力传播过程使岛弧区的应力增大,由密度差异引起的板块拉力产生了分散的挤压应力和拉张应力。断层闭锁导致应力局部集中,板间地震的断层错动只对破裂附近小范围的应力状态产生影响  相似文献   

6.
The Kuril-Kamchatka subduction zone is the most mobile and seismically active region in Northeast Eurasia. The Kuril island arc is one of the few tectonically active regions, where until recently there had been no space geodetic network. The first GPS stations were installed on the Kamchatka Peninsula in 1997, and on the islands of the Kuril arc from Kamchatka to Hokkaido, in 2006. The collected geodetic data allowed us to reveal the geometry of the interplate coupling along the whole Kuril-Kamchatka arc, and also to estimate the source parameters and their features for a number of major earthquakes in this area.  相似文献   

7.
胡桂  李娟  韩光洁 《地球物理学报》2019,62(8):3004-3016
对比研究了具有不同热参数、不同俯冲形态的西北太平洋俯冲地区和汤加俯冲地区的深震特殊聚簇的地震学特性和成因.利用单键群方法探测到两个特殊的深震聚簇G1N和G1T.聚簇G1N位于地震空区下方,具有极低的b值(~0.54),完全不同于具有高b值(~1.04)的汤加俯冲地区聚簇G1T.通过对聚簇地区板块形态、地震主应力轴、地震深度分布特征的分析,以及和汤加典型的板片折曲处地震活动性的对比,我们认为深震聚簇G1N附近的板块表现出板片折曲的特征,板块俯冲到地幔过渡带底部受到下地幔的黏性阻力,板片局部向上凸起发生折曲,产生局部的拉张应力,叠加在俯冲造成的压缩构造背景上,应力状态发生改变,从而影响该深震聚簇的地震活动性.汤加地区G1T聚簇深震的成因则完全不同,没有体现出板片折曲、应力变化的特征;相反,这些深震发生在较冷的Vitiza-Fiji俯冲板块上,该板块在5~8 Ma年前先行俯冲到G1T区域并与Tonga板块发生拆离,G1T聚簇深震就发生在这些温度依然很低、滞留于~500 km深度处的高速板片残留体上.  相似文献   

8.
The paper discusses model results and then reviews observational data concerning some aspects of the mechanics of mature seismic gaps in coupled subduction zones. The concern is with space-and time-varying stresses, as signalled by the presence and mechanisms of earthquakes in the outer-rise zones adjacent to main thrust areas of large subduction events, and down-dip from such areas, in the downgoing slab. Observations are shown to be consistent with the expectation that in mature seismic gaps, as a result of interplate boundary locking in presence of sustained gravitational driving forces, at least the deeper portions of the ocean plate in the outer-rise zones are under increased compression, and the downgoing slab is under increased tension. The observational data cover two cases of closed seismic gaps, namely the region of the Chilean Valparaiso earthquake of March 3, 1985, and the earthquake of October 4, 1983. Four other cases concern still to-be-closed gaps in northern Chile and along the coast of Guatemala, and also the Kurile Islands Trench gap and the northern New Hebrides gap. It is concluded that the intermediate-term precursor, consisting of a combination of compressional outer-rise earthquake(s) and tensional intermediate-depth, intra-plate events in the downgoing slab, which mechanically signals the latter part of the earthquake cycle, could be useful in evaluating the maturity, and hence great earthquake potential of a seismic gap.  相似文献   

9.
Sources of Tsunami and Tsunamigenic Earthquakes in Subduction Zones   总被引:1,自引:0,他引:1  
—We classified tsunamigenic earthquakes in subduction zones into three types earth quakes at the plate interface (typical interplate events), earthquakes at the outer rise, within the subducting slab or overlying crust (intraplate events), and "tsunami earthquakes" that generate considerably larger tsunamis than expected from seismic waves. The depth range of a typical interplate earthquake source is 10–40km, controlled by temperature and other geological parameters. The slip distribution varies both with depth and along-strike. Recent examples show very different temporal change of slip distribution in the Aleutians and the Japan trench. The tsunamigenic coseismic slip of the 1957 Aleutian earthquake was concentrated on an asperity located in the western half of an aftershock zone 1200km long. This asperity ruptured again in the 1986 Andreanof Islands and 1996 Delarof Islands earthquakes. By contrast, the source of the 1994 Sanriku-oki earthquake corresponds to the low slip region of the previous interplate event, the 1968 Tokachi-oki earthquake. Tsunamis from intraplate earthquakes within the subducting slab can be at least as large as those from interplate earthquakes; tsunami hazard assessments must include such events. Similarity in macroseismic data from two southern Kuril earthquakes illustrates difficulty in distinguishing interplate and slab events on the basis of historical data such as felt reports and tsunami heights. Most moment release of tsunami earthquakes occurs in a narrow region near the trench, and the concentrated slip is responsible for the large tsunami. Numerical modeling of the 1996 Peru earthquake confirms this model, which has been proposed for other tsunami earthquakes, including 1896 Sanriku, 1946 Aleutian and 1992 Nicaragua.  相似文献   

10.
Seismotectonic regionalization of the Kamchatka subduction zone was carried out by retrospective analysis of the temporal sequence and locations of earthquake occurrence and an examination of relationships between the earthquake hypocenters and morphostructures in the continental slope of eastern Kamchatka. Ten segments separated with earthquake-generating strike-slip faults have been identified in the overthrusting (overhanging) margin of the Sea-of-Okhotsk plate in the zone where the Pacific and the Sea-of-Okhotsk plates interact orthogonally. Two to three earthquake-generating thrust blocks have been identified within these segments. This type of subduction is consistent with the keyboard-block model of L.I. Lobkovskii and B.V. Baranov. We put forward a model involving segmentation and generation of thrust blocks due to nonuniform coupling between the subducted Pacific plate and the overhanging Sea-of-Okhotsk plate. According to this model, both segmentation and the formation of thrust blocks are caused by nonuniform plate coupling due to unevenness in the relief of the plunging plate. The thrusts have relief expression as underwater highs and terraces, which indicate that a tsunami-generating earthquake can occur at this location. The highest rate of occurrence for magnitude 7 or greater earthquakes is found at the sharp bend of the Pacific plate, where the subduction angle is 10°–12° instead of 50°–51°, corresponding to a frontal (tectonic) arc, which can be traced by a positive free-air gravity anomaly and by an isostatic anomaly.  相似文献   

11.
The western Hellenic arc has been commonly considered as a largely aseismic subduction zone, from the comparison of a small rate of shortening derived from the seismic moment release, with a large rate of convergence inferred from geology. Complete seismic coupling would instead be expected from models that consider a control by plate tectonic forces, because of the trenchward velocity of the Hellenic–Aegean upper plate now confirmed with GPS measurements. In the region of the Ionian Islands, a subduction interplate boundary has been recently imaged and its seismogenic downdip width suggested to be moderate, from reflection seismic profiling and local earthquake tomography. In the appropriate model for such an earthquake source region, which considers a single interplate fault and takes into account these features, the moderate seismic moment release is found consistent with complete seismic coupling of this subduction. The shallow downdip limit of the seismogenic zone can be interpreted as due to the interplate boundary being overlain there by the ductile deeper crust of the orogenically thickened Hellenides.  相似文献   

12.
We assess the tsunami hazard posed to New Zealand by the Kermadec and southern New Hebrides subduction margins. Neither of these subduction zones has produced tsunami large enough to cause significant damage in New Zealand over the past 150?years of well-recorded history. However, as this time frame is short compared to the recurrence interval for major tsunamigenic earthquakes on many of the Earth’s subduction zones, it should not be assumed that what has been observed so far is representative of the long term. For each of these two subduction zones we present plate kinematic and fault-locking results from block modelling of earthquake slip vector data and GPS velocities. The results are used to estimate the current rates of strain accumulation on the plate interfaces where large tsunamigenic earthquakes typically occur. We also review data on the larger historical earthquakes that have occurred on these margins, as well as the Global CMT catalogue of events since 1976. Using this information we have developed a set of scenarios for large earthquakes which have been used as initial conditions for the COMCOT tsunami code to estimate the subsequent tsunami propagation in the southwest Pacific, and from these the potential impact on New Zealand has been evaluated. Our results demonstrate that there is a significant threat posed to the Northland and Coromandel regions of New Zealand should a large earthquake (M w ?8.5) occur on the southern or middle regions of the Kermadec Trench, and that a similarly large earthquake on the southern New Hebrides Trench has the potential to strongly impact on the far northern parts of New Zealand close to the southern end of the submarine Three Kings Ridge. We propose logic trees for the magnitude–frequency parameters of large earthquakes originating on each trench, which are intended to form the basis for future probabilistic studies.  相似文献   

13.
Tomographic images of mantle structure beneath the region north and northeast of Australia show a number of anomalously fast regions. These are interpreted using a recent plate tectonic reconstruction in terms of current and former subduction systems. Several strong anomalies are related to current subduction. The inferred slab lengths and positions are consistent with Neogene subduction beneath the New Britain and Halmahera arcs, and at the Tonga and the New Hebrides trenches where there has been rapid rollback of subduction hinges since about 10 Ma. There are several deeper flat-lying anomalies which are not related to present subduction and we interpret them as former subduction zones overridden by Australia since 25 Ma. Beneath the Bird’s Head and Arafura Sea is an anomaly interpreted to be due to north-dipping subduction beneath the Philippines-Halmahera arc between 45 and 25 Ma. A very large anomaly extending from the Papuan peninsula to the New Hebrides, and from the Solomon Islands to the east Australian margin, is interpreted to be the remnant of south-dipping subduction beneath the Melanesian arc between 45 and 25 Ma. This interpretation implies that a flat-lying slab can survive for many tens of millions of years at the bottom of the upper mantle. In the lower mantle there is a huge anomaly beneath the Gulf of Carpentaria and east Papua New Guinea. This is located above the position where the tectonic model interprets a change in polarity of subduction from north-dipping to south-dipping between 45 and 25 Ma. We suggest this deep anomaly may be a slab subducted beneath eastern Australian during the Cretaceous, or subducted north of Australia during the Cenozoic before 45 Ma. The tomography also supports the tectonic interpretation which suggests little Neogene subduction beneath western New Guinea since no slab is imaged south of the New Guinea trench. However, one subduction zone in the tectonic model and many others, that associated with the Trobriand trough east of Papua New Guinea and the Miocene Maramuni arc, is not seen in the tomographic images and may require reconsideration of currently accepted tectonic interpretations.  相似文献   

14.
In the Solomon Islands and New Britain subduction zones, the largest earthquakes commonly occur as pairs with small separation in time, space and magnitude. This doublet behavior has been attributed to a pattern of fault plane heterogeneity consisting of closely spaced asperities such that the failure of one asperity triggers slip in adjacent asperities. We analyzed body waves of the January 31, 1974,M w =7.3, February 1, 1974,M w =7.4, July 20, 1975 (1437)M w =7.6 and July 20, 1975 (1945),M w =7.3 doublet events using an iterative, multiple station inversion technique to determine the spatio-temporal distribution of seismic moment release associated with these events. Although the 1974 doublet has smaller body wave moments than the 1975 events, their source histories are more complicated, lasting over 40 seconds and consisting of several subevents located near the epicentral regions. The second 1975 event is well modeled by a simple point source initiating at a depth of 15 km and rupturing an approximate 20 km region about the epicenter. The source history of the first 1975 event reveals a westerly propagating rupture, extending about 50 km from its hypocenter at a depth of 25 km. The asperities of the 1975 events are of comparable size and do not overlap one another, consistent with the asperity triggering hypothesis. The relatively large source areas and small seismic moments of the 1974 doublet events indicate failure of weaker portions of the fault plane in their epicentral regions. Variations in the roughness of the bathymetry of the subducting plate, accompanying subduction of the Woodlark Rise, may be responsible for changes in the mechanical properties of the plate interface.To understand how variations in fault plane coupling and strength affect the interplate seismicity pattern, we relocated 85 underthrusting earthquakes in the northern Solomon Islands Are since 1964. Relatively few smaller magnitude underthrusting events overlap the Solomon Islands doublet asperity regions, where fault coupling and strength are inferred to be the greatest. However, these asperity regions have been the sites of several previous earthquakes withM s 7.0. The source regions of the 1974 doublet events, which we infer to be mechanically weak, contain many smaller magnitude events but have not generated any otherM s 7.0 earthquakes in the historic past. The central portion of the northern Solomon Islands Arc between the two largest doublet events in 1971 (studied in detail bySchwartz et al., 1989a) and 1975 contains the greatest number of smaller magnitude underthrusting earthquakes. The location of this small region sandwiched between two strongly coupled portions of the plate interface suggest that it may be the site of the next large northern Solomon Islands earthquake. However, this region has experienced no known earthquakes withM s 7.0 and may represent a relatively aseismic portion of the subduction zone.  相似文献   

15.
Abstract Bathymetric data from south of Hokkaido obtained during a cruise of R/V Hakuho-Maru are summarized, and their correlation with earthquake occurrence is discussed. There are structural lineations on the seaward slope of the Kuril Trench, oblique to the Kuril Trench axis and parallel to the magnetic lineations in the Pacific plate. The structural lineations comprise horst-grabens generated by normal faulting. This suggests that Cretaceous tectonic structures originating at the spreading centre affect present seismotectonics around the trench axis. The structural-magnetic relation is compared to the case of the Japan Trench. North-east of the surveyed area, there are two major fracture zones (Nosappu Fracture Zone and Iturup Fracture Zone) that divide the oceanic plate into three segments. If the fracture zones (FZ) and the zone of paleo-mechanical weakness, represented by magnetic lineations, can control the direction of normal faults at a trench, the extent of the resulting topographic roughness on the seaward slope of the trench would be different across an FZ because of the differences in ages. By studying recent large earthquakes occurring in the south Kuril region, it is shown that several main-aftershock distributions for large earthquakes in this region are bounded by the Nosappu FZ and the Iturup FZ. Two models (Barrier model and Rebound model) are presented to interpret earthquake occurrence near the south Kuril Islands. The Barrier model explains seismic boundaries seen in several examples for earthquake occurrence in the south Kuril regions. The fracture zone forming the boundary of two segments with different magnetic lineations is also the boundary of two different normal fault systems on their ocean bottom, and the difference in sea-bottom roughness between two normal fault systems should affect the seismic coupling at a plate interface. Due to the difference of seismic coupling, earthquake occurrence is controlled by an FZ and then the FZ acts as a seismic boundary (Barrier model). Existing normal faults created by plate bending of subducting oceanic plate should rebound after its subduction (Rebound model). This rebound of normal faults may cause intraplate earthquakes with a high-angle reverse-fault mechanism such as the 1994 Shikotan Earthquake. The energy released by an intraplate earthquake generated by normal-fault rebounding is not directly related to that of interplate earthquakes such as low-angle thrust earthquakes. It is a reason why large earthquakes occurred in the same region during a relatively short period.  相似文献   

16.
—We propose a new model to physically explain the seismic quiescence precursory to a large interplate earthquake. A numerical simulation is performed to quantitatively examine possible stress changes prior to a great interplate earthquake in a subduction zone. In the present study, the frictional force following a laboratory-derived friction law, in which the friction coefficient is dependent on slip rate and slip history, is assumed to act on a dip-slip fault plane of infinite width in a uniform elastic half-space. The values of friction parameters are determined so that the result of numerical simulation may explain some properties of great interplate earthquakes in subduction zones, such as the recurrence interval and the seismic coupling coefficient. The result of simulation reveals that significant quasi-stable sliding occurs prior to a great earthquake and, accordingly, stresses are changed on and around the plate boundary. In a relatively wide area of the overriding continental plate, the compres sional horizontal-stress perpendicular to the trench axis is decreased for a few years before the occurrence of a great earthquake. This decrease in regional compressional stress may account for the appearance of seismic quiescence prior to a great interplate earthquake.  相似文献   

17.
—We have obtained constraints on the strength and orientation of anisotropy in the mantle beneath the Tonga, southern Kuril, Japan, and Izu-Bonin subduction zones using shear-wave splitting in S phases from local earthquakes and in teleseismic core phases such as SKS. The observed splitting in all four subduction zones is consistent with a model in which the lower transition zone (520–660 km) and lower mantle are isotropic, and in which significant anisotropy occurs in the back-arc upper mantle. The upper transition zone (410–520 km) beneath the southern Kurils appears to contain weak anisotropy. The observed fast directions indicate that the geometry of back-arc strain in the upper mantle varies systematically across the western Pacific rim. Beneath Izu-Bonin and Tonga, fast directions are aligned with the azimuth of subducting Pacific plate motion and are parallel or sub-parallel to overriding plate extension. However, fast directions beneath the Japan Sea, western Honshu, and Sakhalin Island are highly oblique to subducting plate motion and parallel to present or past overriding plate shearing. Models of back-arc mantle flow that are driven by viscous coupling to local plate motions can reproduce the splitting observed in Tonga and Izu-Bonin, but further three-dimensional flow modeling is required to ascertain whether viscous plate coupling can explain the splitting observed in the southern Kurils and Japan. The fast directions in the southern Kurils and Japan may require strain in the back-arc mantle that is driven by regional or global patterns of mantle flow.  相似文献   

18.
We construct a viscoelastic FEM model with 3-D configuration of the subducting Philippine Sea plate in Southwest Japan to simulate recent 300-year kinematic earthquake cycles along the Nankai-Suruga-Sagami trough, based on the kinematic earthquake cycle model. This 300-year simulation contains a series of three great interplate earthquakes. The inclusion of viscoelasticity produces characteristic velocity field during earthquake cycles regardless of the assumed constant plate coupling throughout the interseismic period. Just after the occurrence of interplate earthquakes, the viscoelastic relaxation creates the seaward motion in the inland region. In the middle period, the seaward motion gradually decreases, and the resultant velocity field is similar to the elastic one. Later, just before the next interplate earthquake, displacements due to the interplate coupling in the viscoelastic material are distributed more broadly in the forearc region than in the purely elastic one, since the viscoelastic relaxation due to the previous earthquake mostly disappears. The effects of such interplate earthquake cycles on five major inland faults in southwest Japan, where large intraplate earthquakes occurred during this period, are quantitatively evaluated using the Coulomb failure function (CFF). The calculated change in CFF successfully predicts the occurrence of the 1995 Kobe earthquake (M~7). The occurrence of other inland earthquakes, however, cannot be explained by the calculated changes in CFF, and especially the 1891 Nobi earthquake (M~8), the largest inland earthquake in Japan, which occurred at the time close to the local minimum of CFF. This implies that further improvements are necessary for our FEM modeling, such as the modeling of steady east-west compressive force and stress interactions between the inland faults.  相似文献   

19.
The presence of a phenomenological relationship between high velocity regions in the Benioff zone and sources of relatively strong earthquakes (M ≥ 6) was established for the first time from the comparison of such earthquakes with the velocity structure of central Kamchatka in the early 1970s. It was found that, in the region with P wave velocities of 8.1–8.5 km/s, the number of M ≥ 6 earthquakes over 1926–1965 was 2.5 times greater than their number in the region with velocities of 7.5–8.0 km/s. Later (in 1979), within the southern Kurile area, Sakhalin seismologists established that regions with V P = 7.3–7.7 km/s are associated with source zones of M = 7.0–7.6 earthquakes and regions with V P = 8.1–8.4 km/s are associated with M = 7.9–8.4 earthquakes. In light of these facts, we compared the positions of M = 7.0–7.4 earthquake sources in the Benioff zone of southern Kamchatka over the period 1907–1993 with the distribution of regions of high P velocities (8.0–8.5 to 8.5–9.0 km/s) derived from the interpretation of arrival time residuals at the Shipunskii station from numerous weak earthquakes in this zone (more than 2200 events of M = 2.3–4.9) over the period 1983–1995. This comparison is possible only in the case of long-term stability of the velocity field within the Benioff zone. This stability is confirmed by the relationship between velocity parameters and tectonics in the southern part of the Kurile arc, where island blocks are confined to high velocity regions in the Benioff zone and the straits between islands are confined to low velocity regions. The sources of southern Kamchatka earthquakes with M = 7.0–7.4, which are not the strongest events, are located predominantly within high velocity regions and at their boundaries with low velocity regions; i.e., the tendency previously established for the strongest earthquakes of the southern Kuriles and central Kamchatka is confirmed. However, to demonstrate more definitely their association with regions of high P wave velocities, a larger statistics of such earthquakes is required. On the basis of a direct correlation between P wave velocities and densities, the distributions of density, bulk modulus K, and shear modulus μ in the upper mantle of the Benioff zone of southern Kamchatka are obtained for the first time. Estimated densities vary from 3.6–3.9 g/cm3 in regions of high V P values to 3.0–3.2 g/cm3 for regions of low V P values. The bulk modulus K in the same velocity regions varies from (1.4–1.8) × 1012 to (0.8–1.1) × 1012 dyn/cm2, respectively, and the shear modulus μ varies from (0.8–1.0) × 1012 to (0.5–0.7) × 1012 dyn/cm2, respectively. Examination of the spatial correlation of the source areas of southern Kamchatka M = 7.0–7.4 earthquakes with the distribution of elastic moduli in the Benioff zone failed to reveal any relationship between their magnitudes and the moduli because of the insufficient statistics of the earthquakes used.  相似文献   

20.
Fault plane solutions for earthquakes in the central Hellenic arc are analysed to determine the deformation and stress regimes in the Hellenic subduction zone in the vicinity of Crete. Fault mechanisms for earthquakes recorded by various networks or contained in global catalogues are collected. In addition, 34 fault plane solutions are determined for events recorded by our own local temporary network on central Crete in 2000–2001. The entire data set of 264 source mechanisms is examined for types of faulting and spatial clustering of mechanisms. Eight regions with significantly varying characteristic types of faulting are identified of which the upper (Aegean) plate includes four. Three regions contain interplate seismicity along the Hellenic arc from west to east and all events below are identified to occur within the subducting African lithosphere. We perform stress tensor inversion to each of the subsets in order to determine the stress field. Results indicate a uniform N-NNE direction of relative plate motion between the Ionian Sea and Rhodes resulting in orthogonal convergence in the western forearc and oblique (40–50) subduction in the eastern forearc. There, the plate boundary migrates towards the SE resulting in left-lateral strike-slip faulting that extends to onshore Eastern Crete. N110E trending normal faulting in the Aegean plate at this part is in accordance with this model. Along-arc extension is observed on Western Crete. Fault plane solutions for earthquakes within the dipping African lithosphere indicate that slab pull is the dominant force within the subduction process and responsible for the roll-back of the Hellenic subduction zone.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号