共查询到20条相似文献，搜索用时 421 毫秒
1.
It has been shown that the use of base isolation not only attenuates the response of a primary structural system but also reduces the response of a secondary system mounted on or within the main structure. The isolation system, superstructure and equipment may be made of different materials with significantly different energy dissipation characteristics such that the damping matrix for the combined system is non-classical and can only be approximately expressed by modal damping ratios if the classical mode method is used for analysis. The object of this paper is to evaluate the accuracy of this procedure in approximating the responses of base-isolated structures and internal equipment. The complex mode method can provide exact solutions to problems with non-classical damping and is used here to find the exact response of the isolation-superstructure-equipment system. The entire system is assumed to be linear elastic with viscous damping and the superstructure is assumed to be proportionally damped so that the deformation of the superstructure can be expressed in terms of its classical modes. Recognizing that the ratio of the equipment mass to the structural mass and the ratio of the stiffness of the isolation system to the superstructural stiffness are both small, perturbation methods are used to find the response. This study shows that the response of base-isolated structures can be determined by the classical mode method to some degree of accuracy, but the higher frequency content is distorted. The equipment response derived by the classical mode method is much smaller than the exact solution so that the complex mode method should be applied to find equipment response. 相似文献
2.
基础隔震技术广泛应用于建筑结构以减轻结构的地震响应.值得注意的是,在隔震体系中减小主结构的加速度响应是以牺牲隔震器变形为代价的.调谐惯容系统(TID)和隔震器组成的混合隔震体系可减小隔震层的位移响应.与传统调谐质量阻尼器(TMD)结构类似,TID 由惯容、调谐弹簧和阻尼元件组成.因此,可直接利用 TMD减震系统的设计公式来确定 TID 的最优参数.首先基于单自由度体系(SDOF)附加 TID的运动方程,推导分析两种 TID和 TMD设计公式,对两者设计公式的前提条件和适用性进行深入的探讨.其后,借助基础隔震体系的benchmark模型来检验设计 TID的可行性和有效性.数值模拟结果表明,在不增加主结构绝对加速度响应的情况下, TID能够显著减小基础隔震结构的位移响应和基底剪力. 相似文献
3.
隔震结构中非经典阻尼影响及最佳阻尼比分析 总被引：15，自引：1，他引：14
本文采用双自由度非比例阻尼振动模型描述基础隔震体系,用拉普拉斯变换方法获得其地震时域响应的近似解析解,借助于应谱理论分析了非比例阻尼对隔震体系中的上部结构层间最大剪力及隔震层最大位移等响应值的影响,探寻了隔震系统最佳阻尼比的取值范围。 相似文献
4.
层间隔震技术对于结构竖向不规则以及结构增层等状况有良好的适用性。然而,层间隔震可能出现的较大隔震层变形会带来结构设计的困难。通过在隔震层中设置阻尼元件可以减少变形,但是过大的阻尼出力和过多的数量需求可能导致空间布置和安装不便。惯容元件为解决以上问题提供了一种新的途径。该研究提出采用惯容隔震系统作为层间隔震提高能量耗散效率的手段以控制地震响应,同时也给出了基于性能需求的惯容层间隔震的参数优化设计方法。并以一个标准钢结构模型验证了方法的有效性。结果表明:惯容元件的使用显著降低了上部子结构的地震响应和隔震层的变形,惯容系统实现了预期的耗能增效作用。 相似文献
5.
Hsiang-Chuan Tsai 《地震工程与结构动力学》1993,22(11):975-990
A tuned-mass damper is a small damped spring-mass system which vibrates in resonance with the main structure to which it is attached so as to be able to dissipate vibration energy and reduce the structural response. In this paper, explicit forms of Green's function for the transient response of main structures equipped with the tuned-mass damper and subjected to support excitation are derived by perturbation techniques and provide an insight into the characteristics of the damper. It is found that there exists a critical damping level for the tuned-mass damper. If the damper damping is higher than this critical damping level, increasing the damper damping will enhance the structural response. When the damper damping is below this critical value, something called ‘beat phenomenon’ occurs where the structure will have a smaller response in the first beat cycle, but have a higher rebound in the following beat cycles. 相似文献
6.
在近断层地震动下桥梁结构将发生较大反应,减隔震设计是减轻地震损伤的重要手段。提出了在桥梁双柱墩横桥向设置防屈曲支撑(BRB),在纵桥向设置铅芯橡胶支座(LRB)的双向减隔震体系。利用Midas Civil软件建立3种不同减隔震方式的桥梁结构模型:LRB仅单向,LRB双向与LRB联合BRB,运用非线性时程分析方法计算了桥墩反应(墩顶侧移角、残余位移角和曲率延性)、LRB支座变形和BRB的耗能特性等。结果表明:在近断层地震动输入下联合设置LRB和BRB的双向减隔震桥梁减震效果明显,相比其它2种方式,能有效降低墩柱的塑性变形及起到保护桥墩的作用。在横桥向,桥墩最大侧移角、残余位移角和最大曲率延性系数都显著降低。 相似文献
7.
曲线梁桥由于其平面不规则性导致结构在地震激励下产生弯扭耦合效应,使得隔震曲线梁桥的地震响应更加复杂。目前常用的控制方法是将隔震技术与附加减震装置相结合对曲线梁桥进行控制。本文将地震动考虑为一均匀调制非平稳随机过程,针对隔震曲线梁桥长周期、低频率的特点,选取Clough-Pension平稳地震动功率谱模型作为随机地震动输入模型,对无控(NON-C)、经典线性最优控制(COC)以及序列最优控制算法(SOC)三种状态下的曲线桥梁进行随机响应分析。通过建立曲线梁桥在随机地震动作用下的运动方程,求出减震控制结构的位移谱密度、加速度谱密度响应及时变方差。分析结果表明:序列最优控制算法(SOC)在使隔震层位移得到减小的同时,可以更有效地控制上部结构的地震响应,具有更好的控制效果。 相似文献
8.
Response spectrum analysis for non-classically damped linear system with multiple-support excitations 总被引：1，自引：0，他引：1
A new response spectrum method, which is named complex multiple-support response spectrum (CMSRS) method in this article,
is developed for seismic analysis of non-classically damped linear system subjected to spatially varying multiple-supported
ground motion. The CMSRS method is based on fundamental principles of random vibration theory and properly accounts for the
effect of correlation between the support motions as well as between the modal displacement and velocity responses of structure,
and provides an reasonable and acceptable estimate of the peak response in term of peak seismic ground motions and response
spectra at the support points and the coherency function. Meanwhile, three new cross-correlation coefficients or cross covariance
especially for the non-classically damped linear structures with multiple-supports excitations are derived under the same
assumptions of the MSRS method of classically damped system. The CMSRS method is examined and compared to the results of time
history analyses in two numerical examples of non-classically damped structures in consideration of the coherences of spatially
variable ground motion. The results show that for non-classically damped structure, the cross terms representing the cross
covariance between the pseudo-static and dynamic component are also quite small just as same as classically damped system.
In addition, it is found that the usual way of neglecting all the off-diagonal elements in transformed damping matrix in modal
coordinates in order to make the concerned non-classically damped structure to become remaining proportional damping property
will bring some errors in the case of subjected to spatially excited inhomogeneous ground motion. 相似文献
9.
Rolling isolation systems (RISs) protect mission‐critical equipment and valuable property from earthquake hazards by decoupling the dynamic responses of vibration‐sensitive objects from horizontal floor motions. These responses involve the constrained rolling of steel balls between bowl‐shaped surfaces. The light damping of steel balls rolling between steel plates can be augmented by adhering thin rubber sheets to the plates, thereby increasing the rolling resistance and decreasing the displacement demand on the RIS. An assessment of the ability of lightly‐ and heavily‐damped RISs to mitigate the hazard of seismically induced failures requires high‐fidelity models that can adequately capture the systems' intrinsic nonlinear behavior. The simplified model presented in this paper is applicable to RISs with any potential energy function, is amenable to both lightly‐ and heavily‐damped RISs, and is validated through the successful prediction of peak responses for a wide range of disturbance frequencies and intensities. The validated model can therefore be used to compute the spectra of peak floor motions for which displacement demands equal capacity. These spectra are compared with representative floor motion spectra provided by the American Society of Civil Engineers 7–10. The damping provided by rolling between thin viscoelastic sheets increases the allowable floor motion intensity by a factor of 2–3, depending on the period of motion. Acceleration responses of isolation systems with damping supplied in this fashion do not grow with increased damping, even for short‐period excitations. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
10.
磁流变智能基础隔震系统研究 总被引：5，自引：3，他引：2
本文将磁流变(MR)阻尼器与普通橡胶隔震支座相结合,组成智能基础隔震系统应用到结构控制中。在详细介绍了系统的各部分与整体运行情况后,采用LQR经典线性最优控制算法对结构进行了振动台试验研究。试验结果表明,由MR阻尼器提供可调阻尼力的智能隔震控制系统,能有效克服被动隔震最优控制频带窄的缺点,对较宽频域范围地震激励能进行有效的振动控制。其相对一般被动隔震装置,能同时减小上部结构加速度和隔震层位移. 相似文献
11.
Passive supplemental damping in a seismically isolated structure provides the necessary energy dissipation to limit the isolation system displacement. However, damper forces can become quite large as the passive damping level is increased, resulting in the requirement to transfer large forces at the damper connections to the structure which may be particularly difficult to accommodate in retrofit applications. One method to limit the level of damping force while simultaneously controlling the isolation system displacement is to utilize an intelligent hybrid isolation system containing semi-active dampers in which the damping coeffic ient can be modulated. The effectiveness of such a hybrid seismic isolation system for earthquake hazard mitigation is investigated in this paper. The system is examined through an analytical and computational study of the seismic response of a bridge structure containing a hybrid isolation system consisting of elastomeric bearings and semi-active dampers. Control algorithms for operation of the semi-active dampers are developed based on fuzzy logic control theory. Practical limits on the response of the isolation system are considered and utilized in the evaluation of the control algorithms. The results of the study show that both passive and semi-active hybrid seismic isolation systems consisting of combined base isolation bearings and supplemental energy dissipation devices can be beneficial in reducing the seismic response of structures. These hybrid systems may prevent or significantly reduce structural damage during a seismic event. Furthermore, it is shown that intelligent semi-active seismic isolation systems are capable of controlling the peak deck displacement of bridges, and thus reducing the required length of expansion joints, while simultaneously limiting peak damper forces. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
12.
阻尼器是一种效果良好的减震装置,将阻尼器安装于结构中能够适时为结构体系提供阻尼力,从而减小地震作用对结构的破坏。黏滞阻尼器对振动的反应比较敏感,在结构受到较小振动时就可以发挥其减震效果,其阻尼力会随着振动周期和使用状态温度的不同而变化。当地震发生时,安装在结构中的阻尼器会消减地震作用,降低传导到主结构体系的地震能量,减小结构相对位移。本文介绍了黏滞阻尼器的工作原理和安装有黏滞阻尼器的结构体系的阻尼比的计算方法,对减震结构的减震效果的评析方法做出探讨,并以一安装有黏滞阻尼器的台湾某既有钢框架结构为例,分析了(1)该结构在遭受地震作用时的地震反应;(2)该结构体系在不同地震作用水平时的阻尼比,包括主体结构阻尼比和黏滞阻尼器阻尼比;(3)结构安装黏滞阻尼器后的减震效果。实例对本文的减震评析方法和减震效果进行了说明和分析,计算及分析结果表明利用黏滞阻尼器加固既有结构能够取得较好的减震效果,本文所提减震效果评析方法是一种实用有效的评析方法,对类似工程的减震评析具有一定的参考价值。 相似文献
13.
The classical response spectrum method continues to be the most popular approach for designing base‐isolated buildings, therefore avoiding computationally expensive nonlinear time‐history analyses. In this framework, a new method for the seismic analysis and design of building structures with base isolation system (BIS) is formulated and numerically validated, which enables one to overcome the main shortcomings of existing techniques based on the response spectrum method. The main advantages are the following: first, reduced computational effort with respect to an exact complex‐valued modal analysis, which is obtained through a transformation of coordinates in two stages, both involving real‐valued eigenproblems; second, effective representation of the damping, which is pursued by consistently defining different viscous damping ratios for the modes of vibration of the coupled BIS‐superstructure dynamic system; and third, ease of use, because a convenient reinterpretation of the combination coefficients leads to a novel damping‐adjusted combination rule, in which just a single response spectrum is required for the reference value of the viscous damping ratio. The proposed approach is specifically intended for design situations where (i) the dynamic behaviour of seismic isolators can be linearised and (ii) effects of nonproportional damping, as measured by modal coupling indexes, are negligible in the BIS‐superstructure assembly. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
14.
Seismic response of sliding equipment and contents in base‐isolated buildings subjected to broadband ground motions 
下载免费PDF全文
下载免费PDF全文 Base isolation has been established as the seismic design approach of choice when it comes to protecting nonstructural contents. However, while this protection technology has been widely shown to reduce seismic demands on attached oscillatory equipment and contents (EC), its effectiveness in controlling the response of freestanding EC that are prone to sliding has not been investigated. This study examines the seismic behavior of sliding EC inside base‐isolated buildings subjected to broadband ground motions. The effect of isolation system properties on the response of sliding EC with various friction coefficients is examined. Two widely used isolation models are considered: viscously damped linear elastic and bilinear. The study finds isolation to be generally effective in reducing seismic demands on sliding EC, but it also exposes certain situations where isolation in fact increases demands on EC, most notably for low friction coefficients and high earthquake intensities. Damping at the isolation level is effective in controlling the EC sliding displacements, although damping over about 20% is found to be superfluous. The study identifies a physically motivated dimensionless intensity measure and engineering demand parameter for sliding equipment in base‐isolated buildings subjected to broadband ground motions. Finally, the paper presents easy‐to‐use design fragility curves and an example that illustrates how to use them. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
15.
研究不同高径比橡胶基底隔震储罐的频率特征,探讨储罐隔震体系3种不同振动频率随支座隔震频率变化规律.分析在不同频谱特性地震波激励下,隔震体系各振型组分对地震响应(基底剪力、支座位移和晃动波高)的影响,以及响应峰值随支座隔震频率和阻尼比的变化特点.研究表明,基底剪力峰值与场地地震波频谱特性密切相关.支座隔震频率不能完全反映减震机理的实质,隔震振型频率是影响基底剪力的重要参数.在软弱场地上隔震储罐的减震效率低,有效隔震频率范围窄.晃动波高峰值是储罐自振特性和地震波频谱特性等多种因素导致的结果,隔震系统设计时需特别考虑晃动波高增大的影响. 相似文献
16.
An analytical study of the seismic response of typical base isolated structures mounted on rubber bearings is presented. Isolated buildings are liable to have closely spaced lower modes of vibration with small eccentricity between centres of mass and rigidity. The isolated structure is modelled as a rigid deck with lumped masses supported on axially inextensible elastomeric rubber bearings. This simplified system has three degrees of freedom (dof), two translations and one rotation in the horizontal plane. The Green's functions for the displacement response of the 3 dof system are derived for both undamped and damped cases with small and large eccentricities. The small eccentricity case is taken from a specific isolated building, while the large eccentricity case arises from the 5 per cent accidental eccentricity which is required by various seismic codes. An interaction equation for normalized displacements is established for an idealized flat velocity spectrum or hyperbolic acceleration spectrum. An isolated building on rubber bearings would have its fundamental period fall into this range of a design spectrum. Numerical results for the specific building subjected to the El Centro earthquake of 1940 are presented. Both the time history and the response spectrum modal superposition analysis were performed. In the response spectrum analysis, the Complete Quadratic Combination (CQC) showed superiority over the Square Root of the Sum of Squares (SRSS) in estimating maximum responses. It is concluded that the effect of torsional coupling on the transient response of base isolated structures is insignificant, due to the combined effect of the time lag between the maximum translational and torsional responses and the influence of damping in the isolation system which for elastomeric bearings can be as high as 8 to 10 per cent. 相似文献
17.
The implementation of viscous dampers to microelectronics factories has been previously proved not to affect the micro‐vibration of the factories in operation so that the vibration‐sensitive manufacturing process will not be interfered. Therefore, a seismic retrofit strategy which employs the viscous dampers installed in between the exterior and interior structures of the ‘fab’ structure is proposed in the study. The design formulas corresponding to the proposed retrofit method are derived using the non‐proportional damping theory. Based on the study, it is found that the added damping ratio to the fab structure depends greatly on the frequency ratio of the two structures in addition to the damping coefficients of the added dampers. Outside the bandwidth of the frequency ratio in which the added damping ratio is very sensitive to the variation of the frequency ratio, the added damping ratio can be well captured using the classical damping theory. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
18.
The effects of soil–structure interaction on the performance of a nonlinear seismic base isolation system for a simple elastic structure are examined. The steady-state response of the system to harmonic excitation is obtained by use of the equivalent linearization method. Simple analytical expressions for the deformation of the base isolation system and of the superstructure at resonance are obtained in terms of an effective replacement oscillator characterized by amplitude-dependent frequency, damping ratio, and excitation. Numerical results suggest that the seismic response of a structure resting on an inelastic base isolation system may be larger when the flexibility of the soil is considered than the corresponding response obtained by ignoring the effects of soil–structure interaction. It is shown that, in the undamped case and in the absence of soil–structure interaction effects, a critical harmonic excitation exists beyond which the steady-state resonant response of the isolators and structure become unbounded. 相似文献
19.
Structures consisting of two parts, a lower part made of concrete and an upper part made of steel are investigated. In code-based seismic design of such structures several practical difficulties are encountered, due to inherent differences in the nature of dynamic response of each part. The specific issue addressed here is the analysis complications due to the different damping ratios of the two parts. Such structures are irregularly damped and have complex modes of vibration, so that their analysis cannot be handled with readily available commercial software. This work aims at providing a simple yet sufficiently accurate methodology for handling the damping irregularity of such structures, by proposing an overall equivalent damping ratio that can be applied to the complete structure for obtaining its dynamic response. This is achieved by first transforming MDOF irregular structures into equivalent 2-DOF oscillators, using the first mode characteristics of each part, and then using equivalent uniform damping ratios that are derived by means of a semi-empirical error minimization procedure. Thus, available commercial software can be applied for seismic analysis and design and the provisions of existing seismic codes can be adhered to. 相似文献
20.
为研究适用于大跨铁路钢桁连续梁桥的减隔震方案及合理优化参数,以一座全长504 m的三跨铁路钢桁连续梁特大桥为工程背景,使用非线性结构分析软件SAP2000建立有限元模型,采用快速非线性分析方法分析对比摩擦摆、阻尼器、速度锁定器等减隔震方案在各种装置参数下的减震效率。研究表明:由于大跨铁路钢桁连续梁桥墩身自振导致的地震力较大,摩擦摆方案内力减震效率一般,同时墩底内力对滑动面半径变化并不敏感,在选取滑动半径时应更多地考虑行车平顺性和梁端位移值的限制。速度锁定器会极大地增加此类桥梁地震输入能量,不适用于此类桥型。阻尼器方案对活动墩内力减震效果明显,但不能有效降低固定墩内力。摩擦摆支座附加阻尼器组合减震方案能有效控制此类桥梁的内力和位移响应。研究结论可为大跨度钢桁连续梁桥减隔震设计提供参考。 相似文献